Ultraviolet (UV) adhesive is the one component adhesive cured with ultraviolet radiation without heating. The UV adhesives exhibit fast curing, and suitable for many substrates. Such as glass, plastic, metal, wood, and other industrial applications. It takes only a few seconds to cure.
Multi-function on the different materials without surface treatment. Especially, on PP, PA material
High-temperature resistance, anti-aging, high thermal conductivity, and low overflow rate
Corrugating Pasting Gum.
sanitary towel hotmelt glue Product: sanitary towel hotmelt glue Model Number: SY-52 Description: Application: Mainly designed for application adhesive of non-woven goods and sanitary towel goods. Properties: Good initial tack, excellent holding power, light odor, no stringing, and good resistant oil-penetration and so on. Application: Mainly designed for application adhesive of non-woven goods and sanitary towel goods. Properties: Good initial tack, excellent holding power, light odor, no stringing, and good resistant oil-penetration and so on. Technical Data: Appearance:Clear yellow block Color:0-2 Softening point (R&B):70C Toxicity:innocuity Initial Tack:>15#ball Peel strength :> 10N/in Viscosity:2500CPs@150â?? Heat resistant: From below 5â?? to 70â??, holding power is 2 hours at 45â??, half an hour at 65â??. Suggested running temperature:155â??-175â?? Package:20kg/case , , 1kg/piece Storage:Store in a clean, dry area. Storage cycle:12 months. Note: Wear goggles and adiabatic gloves when working around hot melt machine.If the plant line stops for over 2 hours,The glue temperature should be tuned down below 120C or turn off the machine. Regularly maintaining and cleaning machine.
We Sale 01. Pu Adhesive 02. Hardener 03. All Type Of Primer 04. Neoprene Adhesive 05. Graft Adhesive
Ceramic Glue / Water Proof / OTHER
Wallnut Connect & Lock premium Epoxy Grout is consisting of high quality special coated colour quartz, eco-friendly resin & hardener. The grout provides excellent high-quality joints between tiles & stone. The joints are chemical, stain & abrasion resistance. Connect & Lock Epoxy Grout doesnâ??t allow water to go through and can be used for filling the tile & stone joints up to 15mm on floor & on wall
Epoxy resin based, solvent free, two component, thixotropic mounting and bonding mortar. Application Areas: In adhering the EKAFLEX dilatation band. When assembling and adhering all kinds of metal parts to concrete or steel parts. In all kinds of structural concrete repair. In all types of iron ores. In the placement of anchor elements. Concrete crack repair and insulation. In the bonding of ceramic, granite and marble plates. Bonding of the surfaces such as concrete, stone, metal, wood to each other and used between them. Advantages: It cures quickly and it allows loading in a short time. Solvent free. It is suitable for indoor and outdoor use. High adhesion performance, bonds to many different. surfaces such as concrete, steel, metal, wood, stone, ceramic and granite. It is thixotropic and does not sag in vertical and overhead applications such as walls and ceilings. Composition A and B are in different colors and the formation of homogeneous mixture can be visually monitored. Water impermeable - It can stick even on moist surfaces. High mechanical endurance. Preparation of Mixture: EKAFIX has two components. Component A (3.75kg) and Component B (1.25kg) is mixed in low speed (400-600 dv / min) mixer until it becomes a homogeneous mixture. EKAFLEX Band application: EKAFLEX dilatation tapes are applied on both sides with a trowel or spatula with a 1.5 mm thickness and a 40 mm wide strip of EKAFIX. After EKAFLEX is poured, the same procedure is applied on top of the band and the adhesive should not be exposed to mechanical stress until fully dry. Do not affix EKAFLEX dilatation band joints with EKAFIX epoxy adhesive. The joints must be glued with hot air supply. The adhesive used in the cementation process of ceramic, granite, and marble is applied on the surface by using a notched trowel. The piece should be slightly glided during the placement and should get into the final position in 30 minutes. In general-purpose cementing, the adhesive should be applied on both surfaces and materials should not be moved after being pressed together until the adhesive dries.
Supplying business of construction chemicals like Tile Adhesive and Epoxy tile grout
Supplying business of construction chemicals like Tile Adhesive and Epoxy tile grout
This MR-2 product is siiler to the FEVICOL MARINE grade. and MR-2 product is water proof*. MR-2 Strong water resistance High Solids High initial Tack Fast Setting Time Heat & Fungal Resistance Better Penetration in Wood MR-2 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications. For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc. For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present) Suitable for Vertical/Horizontal applications. Excellent spreadability for better coverage. Non Hazardous / non inflammable and free from harmful solvents. Prolonged shelf life without affecting the quality on storage. Economical in long run. Special preservative used to protect adhesive from any bacterial growth during storage. Single component adhesive.
PR-1 is similer to the FEVICOL SH grade. PR-1 Faster Bonding- Time saving leading to increased productivity & faster completion of project Heat and fungal resistant PR-1 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications. For bonding Plywood/MDF/Particle board etc with each other & also bonding with Laminate/Veneer etc. For Edge Bonding, Finger Jointing and Wooden Flooring where water seepage is not present. Powerful Bond strength. Suitable for Vertical/ Horizontal applications. Excellent spreadability for better coverage.
REGULAR is the grade which is similer to the BULBOND WK. which is lower grade for carpenter use. which is also a cost effective grade for low cost working.
This MR-2 product is siiler to the FEVICOL MARINE grade. and MR-2 product is water proof*. MR-2 Strong water resistance High Solids High initial Tack Fast Setting Time Heat & Fungal Resistance Better Penetration in Wood MR-2 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications. For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc. For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present) Suitable for Vertical/Horizontal applications. Excellent spreadability for better coverage. Non Hazardous / non inflammable and free from harmful solvents. Prolonged shelf life without affecting the quality on storage. Economical in long run. Special preservative used to protect adhesive from any bacterial growth during storage. Single component adhesive.
PR-1 is similer to the FEVICOL SH grade. PR-1 Faster Bonding- Time saving leading to increased productivity & faster completion of project Heat and fungal resistant PR-1 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications. For bonding Plywood/MDF/Particle board etc with each other & also bonding with Laminate/Veneer etc. For Edge Bonding, Finger Jointing and Wooden Flooring where water seepage is not present. Powerful Bond strength. Suitable for Vertical/ Horizontal applications. Excellent spreadability for better coverage.
Regular is the grade which is similer to the BULBOND WK. which is lower grade for carpenter use. which is also a cost effective grade for low cost working.
Regular is the grade which is similer to the BULBOND WK. which is lower grade for carpenter use. which is also a cost effective grade for low cost working.
PR-1 is similer to the FEVICOL SH grade.
This MR-2 product is siiler to the FEVICOL MARINE grade. and MR-2 product is water proof*.
