Magnesia chrome brick with high purity magnesia and high quality chrome ore as raw material, after high pressure forming and high temperature sintering. Magnesia chrome brick with good thermal shock resistance and volume stability, used in the cement and glass industries, also Non-ferrous metal smelting furnace.
Building and Construction Material: Concrete interlocking bricks Dimension: length width height 220mmx125mmx70mm Minimum Quantity Order: 10 000 pieces Price: 15 pesos per piece Manufacturer: Korean Color: Gray Shape: Rectangular
Magnesium silicate insulation board : The board has a high structural strength, low deformation after sintering, good insulation properties and resistance to moisture. It retains its physical properties during operation at high temperatures. Installation of this board imparts volume stability to the complete lining, reduces the shell temperature of the furnace, and eliminates stresses within the bricks thereby ensuring safe operation of the furnace and effectively saving energy. This product is mainly used for applications in the metallurgical and building industries, for furnace insulation and for fire resistance, etc.. The shell temperature of a ladle in which magnesium silicate insulation board is used as the lining is much lower than that of a normal ladle. The average reduction in shell temperature is 75c and the maximum reduction in shell temperature can be as much as 120c. The use of this board therefore helps to eliminate deformation of the ladle shell and improves greatly the operating environment within the ladle. The rate of temperature loss of the molten steel is lower than that of a normal ladle, typically an average of 0.3~0.5c/minute. This shows that the heat retention of the molten steel is quite high, thereby reducing heat losses and saving energy and also ensuring a smooth continuous casting process due to the constant temperature and casting rate of the steel.
For refractory materials, sintering is very important, whether it is natural raw materials, or synthetic raw materials, have to be burned, to sinter before use, fire-retardant refractory products is to achieve the date of sintering. Unshaped refractory materials in the process of gradually sintering. From a process point of view, sinter is a sturdy, low porosity (almost airless 7L) stone made from a powder at high temperatures. Refractories degree of flexibility of the signs, usually with the object size reduction (the so-called shrinkage), reduced porosity and bulk density increased to measure. Sintering is mainly due to the strengthening of refractory material, the inevitable result of increased contact between the particles. Sintering (intrinsic) has the following processes: changes in the shape of the pore size phase; crystal growth, residual stress (suppression) reduction and equilibrium; liquid phase formation; redistribution of phase space; In many cases, sintering accompanied by multi-phase transformation of certain phases, solid-phase chemical reactions or liquid-phase reactions. The reaction forms a new phase and a solid melt. The final cooling complicates the enumeration process, with some of the opposite processes occurring. Multi-product changes, melt crystallization and crystallization pressure may occur, the formation of the glass phase and other phenomena. Like the lower temperature drop, the refractory material produces stress and often produces macroscopic defects so that the refractory products are discarded. Temperature gradients, temperature change rates, phase and concentration gradients, atmospheres, high frequency field effects, vibrations and other conditions in a refractory body all depend on the temperature. Even within the refractory material. y1 its temperature changes have a very complex phenomenon, can not fully enumerate the occurrence of the process
Description Silimanite brick is a kind of refractoriness which made by silimaniteand other minerals. And silimanite can be transformed to be mullite under more 1500 high temprature. Applications Silimanite brick are mainly used in high temprature furnaces, such as glass melting furnace, etc The main applications are: 1, rider arches 2, forehearth superstracture 3, bushing for rochwool and fiber glass Specifications 1, dense structure 2, good thermal shock resistance Advantages 1, corrosion-resistant; 2, high quality
Feature It is mainly made of top class silica, via shaping and burning under the high temperature, possesses high temperature resistant, high strength and low impurities, etc. â?º Advantage: 1) Good thermal insulaton effects 2) Good acid erosion resistance. 3) High softening point with temperature. 4) No shrink in burn repeatedly. Stable Capability, High Quality, Excellent Service, Competitive price is the most important advantage of our products. Application: The main applications are the low temperature parts such as blast furnaces and hot blast furnaces, waste incinerators and glass melting furnaces.
Acid proof bricks / acid resistance bricks Our team of expert and skilled personnel has enabled us to supply and export acid proof bricks. These acid proof bricks are made of supreme quality raw materials and using advanced machinery and techniques. Known for their sturdy nature, these products are able to bear heavy loads. Owing to their optimum resistance against chemicals, acids, high temperature and corrosion, these products have earned a huge demand among our esteemed clients in the global market. Acid proof bricks can be availed from us in varied sizes as per the requirements of our respected patrons.
Main mineral component of corundum brick is corundum phase, it has excellent physical property in high temperature, resistance to chemical corrosion. It is widely used in lining of ovens of petrochemical industry; bottom of steel rolling mill and in the second-stage converters of the 300000t ammonia synthesis furnaces, steel notch. Application: Fused corundum block is mainly used in key parts of the industrial furnace that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnaces, the tapping platform (tapping spout) style walking beam furnaces, and also as the interior for destructors.
Specifications: 1.Magnesia brick refractory 2.Ccs:60mpa, rul:1700 3.Good erosion resistance 4.High quality 5.Reasonable price Â?ºmagnesia brick features: Excellent performance of basic slag resistance, high refractoriness, thermal stability, anti-erosion and anti-peeling Excellent strength of pressure bending, abrasion proof Excellent performance of high-temperature firing, high rates of associative property, anti-erosion ability Excellent thermal shock resistance and spalling resistance Excellent ability of high refractoriness, anti-erosion of alkaline residue; High temperature load of refractoriness under load. High mechanical strength High temperature resistance excellent corrosion resistance Resistance to spalling It is basic refractory which the main phase is periclase. The product has such characteristics as high temperature resistance. Good slag resistance. Strong corrosion resistance and steady volume in high temperature. Â?ºapplication: Magnesia brick is characterized by high refractoriness, good alkali resistance and superior refractoriness under load, and it is mainly applied to the regenerators of glass kilns and other high temperature furnaces. -
Specifications 1.Fused magnesia brick refractory 2.Ccs:60mpa, rul:1700 3.Good erosion resistance 4.High quality 5.Reasonable price
Sillimanite big block: Due to its good chemical stability, high fire resistance, big intensity and good high temperature performance, it is a new top-grade refractory material with high erosion resistant.
Silica brick is a kind of acid refractory mainly made from tridymite, cristobalite and a small amount of residual quartz as well as glass phase. The raw material is natural silica sand whose SiO2 content should be more than 96%. The higher SiO2 content in silica sand, the higher temperature silica bricks resist. Silica bricks are used in the roof and superstructure of glass melting tanks as well as for hot repairs.
We are the leading manufacturer and exporter of Acid Proof Bricks, Acid Proof Tiles, Acid Proof mortar, acid proof cement, acid proof mastic, acid proof primer etc.
With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors. MD Mold Bricks characterize as follows: 1. Low permanent linear change on reheating Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks. 2. High dense structure MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure. 3. Good Thermal Shock Stability. No cracks even chap would be happening after long service of the bricks 4. Easy to be machined The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks. We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market. MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.
Description Silimanite brick is a kind of refractoriness which made by silimaniteand other minerals. And silimanite can be transformed to be mullite under more 1500�?? high temprature. Applications Silimanite brick are mainly used in high temprature furnaces, such as glass melting furnace, etc The main applications are: 1, rider arches 2, forehearth superstracture 3, bushing for rochwool and fiber glass Advantages 1, corrosion-resistant; 2, high quality
Main mineral component of corundum brick is corundum phase, it has excellent physical property in high temperature, resistance to chemical corrosion. It is widely used in lining of ovens of petrochemical industry; bottom of steel rolling mill and in the second-stage converters of the 300000t ammonia synthesis furnaces, steel notch. Application: Fused corundum block is mainly used in key parts of the industrial furnace that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnaces, the tapping platform (tapping spout) style walking beam furnaces, and also as the interior for destructors.
Specifications Mg-C brick has high refractoriess high basic slag resistance good thermal conductivity Magnesia Carbon brick is resin-bonded brick made from dead-burned or fused magnesia and graphite. Anti-oxidant is added if required. Magnesia Carbon brick has good performance in thermal resistance, corrosion resistance and spalling resistance. Widely used in converters, EAFs, ladles and refining furnaces. Magnesia Carbon bricks a very mature product in our area. As our area has 1/4 world storage of best quality Magnesia ore, we can provide as good quality as European Mg-C bricks with competitive prices. We also provide basic refractory lining solution for CONVERTER, EAF, LF, LADLE, etc. these industrial furnaces.
Dense zircon brick ZS-65 is a kind of fire brick. The zircon content of it is equal to or greater than 65 percent. It possesses many advantages as high bulk density, low apparent porosity, high cold crushing strength and high refractoriness under load. It is widely used in glass industry and metallurgical industry. Applications Dense Zircon brick is widely used in the upper area of flame space and frequent thermal shock region of alkali-free or low-alkali glass, sodium-calcium glass, boron-silicate glass, lead glass and other technical glass melting furnace. It can be also used in transition region between up roof silica brick and fusion zirconia-corundum brick or fusion zirconia-mullite brick, transition region between silica brick and magnesia brick, crown, burner, thermal couple, peep hole, secondary layer of melting bottom and back lining. In addition, it is also applied as the ladle lining for metallurgical industry. The main applications It is mainly applied in the neutral course in tank superstructure and sealing course in tank bottom. Advantages High bulk density Low apparent porosity High cold crushing strength High refractoriness under load
Description Mullite insulation bricks are high alumina refractories mainly made from good quality and pure raw materials.In generally, alumina accounts 65%-75%. Besides mullite,there are also glass phase and christobalite as well as corundum which are good grade fillings. Mullite insulation bricks are widely used for lining in high temperature kilns such as shuttle kiln,roller kiln,glass kiln and petroleum kilns. Specifications 1.Low thermal conductivity, good heat insulation. 2.Low thermal melting point. Lightweight mullite insulating bricks save heat and energy. 3.Low impurity content,high temperature resistance; higher alumina content ensures good performance. 4.Customized shapes to reduce bricks quantity and cost. 5.Dense,compact and accurate structure,low porosity rate. 6.High loading temperature,corrosion resistance. Application Due to its lightweight and good insulating performance,our mullite insulation bricks has broad use for fire resistance lining in heat side and insulating layers, thus increases energy efficiency greatly. Mullite lightweight bricks are popular in hot blast kiln crown,flame side and bottom parts; glass melting furnace regenerator,ceramic sintering kiln,Petroleum cracking system corners and linings,ethylene pyrolysis furnaces, tubular furnaces, reforming furnaces of synthetic ammonia, gas generators and high-temperature shullte kilns, etc.
*clay bricks are made of super nature clay as main material, which is main extrusion bricks fired by using tunnel kiln with high temperature , and it is widely used in building decoration. *there are many types of surface with different colors, wirecut face , smooth face, sandblast face, handmade , antique.And ranges of colors, red , gray, coffee , yellow , black , white, etc, and that accept customized by customer’s requirement. Size(l*w*t):240*60*12mm, or customized Surface :Wire-cut face Usage:Exterior wall decoration Applying place:Apartment, hospital, university, railway station, mall, hotel, etc Certificate:Passed iso9001:2008 quality system Modulud of rupture:29~32m/mm2 Water absorption:3.1~3.5% Porosity:Solid Remark:Accept size and color customized
