This apparatus is used to test the concrete impervious performance, automatic pressure control and digital display, its widely used in construction company, research institution, design department, also it can be used for ventilation property test and quality inspection of other construction materials.
we make machines that porduce brick, roof tile or ceramic tile
Xinfeng Construction Machinery 600 stable soil mixing plant is a large-scale stable plant mixing one of the classic products, by virtue of advanced technology, excellent quality, stable quality, in the market enjoy a lot of reputation in Hebei, Hubei, Henan , Ningxia, Gansu, Jiangsu and other regional large-scale projects have emerged on its high figure. 600 water stable mixing station Stable soil mixing station operation should pay attention to the following main points: 1, in the production process, due to lack of transport vehicles or paving capacity and other reasons caused by a short period of time does not produce equipment, you can press the "break switch", so that the batching unit and impeller feeder feed; Pump motor, so that water supply to stop; and keep the rest of the normal operation of the motor. 2, batching units should always keep the aggregate in the aggregate specifications of the same. For the equipment with a broken arch device, the fence also has a safety protection, shall not be removed. When the other motor is not started, the pump motor can be started separately to clean the site or equipment. Therefore, it is necessary to recalibrate the calibration factor corresponding to the batching machine when replacing the aggregate size and adjusting the door opening. 3, for the greater impact on the outside world weather, easy to wet agglomeration or deterioration of the material, should be avoided in the distribution bucket long-term placement. 4, cement warehouse in the cement application every day, otherwise, the material in the warehouse will be back to the tide and hardening, causing the engine to start the problem, affecting the work of the next day. 5, on the batching unit calibration. In the powder distribution system, the impeller feeder and the screw conveyor are more sensitive to impurities in the powder, so the impurities in it to be timely and effective to remove, so as not to speed up the impeller feeder wear, affecting the accuracy of ingredients The 6, equipment operation, the operating staff should pay attention to observe the size of the main motor current, is strictly prohibited overload operation. The new type of concrete mixer, mixing station, batching machine, mixing station model is complete, wbz200, wbz300, wbz400, wbz500, wbz600 type water stable mixing station model is complete,
China coal 0001 TPJ-2.5 TPJ-2.5 Rubber Paver Machine for Running Way/ runway In Proper Price and Reasonable Quality Introduction of TPJ-2.5 rubber paver machine is a technology with higher levels or plastic track laying machine. It employs advanced technology and frequency stepless speed regulation of hydraulic gear to increase their degree of automation built performance of the construction of venues able to satisfy the requirements of the quality of the playing field to achieve target. It has many advantages such as high efficiency, low consumption, high-quality and easy operation, by the majority of users at home and abroad. Structure& Function of 1.Used for spreading or paving the bottom layer of plastic cement stadiums. 2.Framework: with a firm and stable welded H-type structure, and a rust-proof paint layer, it may accommodate any poor condition in the construction site. 3.Front scratch board: welded joint structure, the ground clearance is manually adjustable through a screw, which control the thickness of the floor layer. The width may be adjusted through a limiting board. 4.Driving device: the main driving system is a motor-driven caterpillar chain, with the sped smoothly controlled by a frequency converter, which is feature as stably and precisely moving ahead or back in an motion. It may be equipped with different caterpillar belt for different bottoms. 5.Walking mechanism: the spreading machine may be manually moved or relocated through a walking mechanism consisting of advanced ratchet lever system and lift. 6.Screed: The screed has four functions, via. The adjustment of height, angle, temperature, and vibration. The plastic cement material is vibrated, compacted and paves while passing through the screed. Parameter of Name Paver machine Model TPJ-2.5 TPJ-1.5 Actual Width 2800mm 2100mm Paving Width 2500mm 1500mm Moving Speed 0.8-6m/min 0.8-6m/min Paving Capability 500 sq.m./h 300 sq.m./h Power 8kw 8kw Temperature adjustment for electric heating board 90-120 centigrade 90-120 centigrade Machine Weight 850kg 700kg Dimension 3000*1800*720mm 2200*1700*720mm Packing Style Wooden case Wooden case
china coal 0001 TPJ-2 Type Paver Machine With Big Discount TPJ-2 Type Paver Machine With Big Discount Introduction TPJ-2 Type Paver Machine With Big Discount for running way is the paving equipment of synthetic running track with high technical contained manufactured by our company . The machine is assembled the advanced the technology of Siemens frequency conversion step less speed regulation and the hydraulic gear , enhance the automaticity of paving . Its performance satisfied the sports fields construction requirement and achieve and achieve the quality and technical specifition . its highly effective ,low consumption ,high quality and easy operation and so many good characteristics is approved by domestic and foreign customers . TPJ-2 Type Paver Machine With Big Discount Parameter Name Paver machine Model TPJ-2.5 TPJ-2.0 TPJ-1.5 Actual Width 2800mm 2300mm 1800mm Paving Width 2500mm 2000mm 1500mm Temperature adjustment for electric heating board 90-120 centigrade 90-120 centigrade 90-120 centigrade Machine Weight 850kg 700kg 600kg Moving Speed 0.8-6m/min 0.8-6m/min 0.8-6m/min Paving Capability 500 sq.m./h 400 sq.m./h 300 sq.m./h Power 8kw 8kw 8kw Dimension 3000*1800*720mm 2500*1700*720mm 2000*1700*720mm Packing Style Wooden case Wooden case Wooden case
china coal 0001 Tpj-1.5 Paver Machine Chart and photograph same with product 4 Tpj-1.5 Paver Machinery Introduction TPJ-1.5 Paver machinery for running way is the paving equipment of synthetic running track with high technical contained manufactured by our company. The machine is assembled the advanced the technology of Simons frequency conversion step less speed regulation and the hydraulic gear, enhance the automaticity of paving. Its performance satisfied the sports field?? construction requirement and achieve and achieve the quality and technical specifition. Accessories: A potentiometer Key to the bearing Wheel A set of tools Tpj-1.5 Paver Machinery Parameter Name Paver machine Model TPJ-1.5 Actual Width About 1800mm Paving Width 1500mm Moving Speed 0.8-6m/min Paving Capability 200 sq.m./h Power 8kw Value adjustment of hydraulic system 8Mpa Temperature adjustment for electric heating board 120 centigrade Machine Weight 700 kg Dimension 2000*1700*720mm
china coal 0001 Stone Brick Paver Laying Machine Stone Brick Paver Laying Machine Introduction Stone Brick Paver Laying Machine street / road at one time can be perfectly re street. It also brings directly to the edge. The end result is that the stones are immediately locked tight between the curbs. The street / road in one hit and there is no waste or debris on the road! 1. Better working conditions. 2. Labor saving. 3. High daily production: 300 sqm possible increased. 4. High quality work finished. 5. The edging is made right away, so no cutting work afterwards! 6. Several elements simultaneously processing possible. 7. Partially disabled employees productive again. 8. Short payback. 9. Simple operation. 10. Easy maintenance. Stone Brick Paver Laying Machine Parameter No. Item Parameter 1 Oversize 6000x1500x1700mm 2 Gross weight 2000--4000kgs 3 Laying width 2--5.7m 4 Power 2.5---3.5KW 5 Maximum running speed 4m/minutes 6 Minimum running speed 0.3m/minutes 7 Labor required 4--6 person 8 Daily capacity 500-700m2
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Introduction of SP10N Wall Putty Plaster Spray Machine SP10N Wall Putty Plaster Spray Machine is stirring, pumping, spraying quality putty powder, small machinery, is a kind of sprayer putty sprayer, spray main production at home and abroad and all kinds of decoration putty. Spraying area is 1500 square meter, every day is suitable for home protection, painting, paste on the bottom, etc. Putty coating machine is suitable for spraying material: cement. Thermal insulation mortar, waterproof, fire prevention materials, insulation materials, sound-absorbing materials, putty, paint, white latex, really stone paint, cement, such as water soluble materials, plastic materials, easy spraying 330 m2 per hour, the efficiency increase 25 times Parameter of SP10N Wall Putty Plaster Spray Machine Model SP10N Voltage 220V Power 3kw Displacement volume 13L/min Delivery pressure 30bar Delivery distance 15m Delivery height 15m Length of spraying tube 25m Hopper capacity 50L Feeding mode Blender mixing materials Total weight 90kg Packing Wooden case
Casings and tubes for oil companies. We represent companies from CHINA, BRAZIL and the USA. We deliver worldwide in wholesale or large quantities.
we can supply used construction equipments with bargain price from Japan such as, used excavator, used wheel loader, forklift, tyre roller, compresoor etc we can supply any kind of equipments according to the buyer's request. usually deal with 40ft and 20ft but all depends on buyer's reqeust.
powder mixer. Pouring mixer, mould, side plate, autoclave truck, carrier car. 4. Conveying equipment: semi-product crane, end product crane. Universal equipment includes: 1. Pressure vessel equipment: boiler, autoclave. 2. Crushing equipment: ball miller, crusher. 3. Transportation equipment: crane, lifting machine, feeder, belt conveyor, slurry pump, screw conveyor.
1.Cutting equipment: tilting crane, cutter. 2. Proportioning equipment: electronic measuring scale, slurry beating machine, slurry storage tank, slurry mixer. 3. Pouring and autoclave equipment: aluminum powder mixer. Pouring mixer, mould, side plate, autoclave truck, carrier car. 4. Conveying equipment: semi-product crane, end product crane. Universal equipment includes: 1. Pressure vessel equipment: boiler, autoclave. 2. Crushing equipment: ball miller, crusher. 3. Transportation equipment: crane, lifting machine, feeder, belt conveyor, slurry pump, screw conveyor. 4. Enviornment protect equipment: dust remover Standard as per machienry
pment will be divided into two parts: specialized equipment and universal equipment. Specialized equipment includes: 1.Cutting equipment: tilting crane, cutter. 2. Proportioning equipment: electronic measuring scale, slurry beating machine, slurry storage tank, slurry mixer. 3. Pouring and autoclave equipment: aluminum powder mixer. Pouring mixer, mould, side plate, autoclave truck, carrier car. 4. Conveying equipment: semi-product crane, end product crane. Universal equipment includes: 1. Pressure vessel equipment: boiler, autoclave. 2. Crushing equipment: ball miller, crusher. 3. Transportation equipment: crane, lifting machine, feeder, belt conveyor, slurry pump, screw conveyor. 4. Enviornment protect equipment: dust remover
The guide handle built-in shock mount to reduce hand-arm vibration Special 4-stroke engine for the rammer Low gravity design makes more stable operation Lifting hook for easy transportation Model:ftr100 Weight:100kg Engine:single cylinder.Four stroke, Air cooled, gasoline honda gx160 5.5hp Max rotate speed: 3600 rpm Oil tank capacity:3l Performance: Compaction depth: 350mm Travel speed: 0-25m/min Jumping times: 460-650 times/min Jumping height: 45-70mm Impacting force: 20kn Plate size: 300*330mm Material: Machine body:aluminum die-casting Bellows(dust cover):polyurethane Plate:compressed wood and iron plates Package size:600*600*1000mm(carton)
Description of walk behind concrete power trowel: Fasta fwt40 walk behind concrete power trowel machines are durable and high efficiency. They are powered by honda gx160 gasoline engine.The trowel blades are 20 inch length And made of 2.0mm thickness spring steel. The float trowel pan is made of 3.0mm thickness Manganese steel and it help the machine have years of high performance. And, our high strength Steel handle provides maximum comfort and control. Features of concrete power trowel machine: 1. Independent rotating flywheel, allowing operation in tight corners and in confined spaces. 2. Over-built gearbox assures long service life. 3. Height adjustable handle, assures operator comfort & easy control. 4. Screw control ensures precise blade adjustment. 5. Heavy type clutch make ¡¡ãleave¡¡àand ¡¡àclose¡¡à closely. 6. Aluminum reducer case is not only light, but also has best heat radiating function. 7. Gear is made of pure copper, the worm gear and endless screw design make them have 2 years warranty. Model: fwt40 Weight: 95kg Engine: gasoline honda gx160 5.5hp Blade quantity:4 pcs Pan quantity: 1 pcs Working speed: 70-125 rpm Working diameter: 915mm Dimension:1820*945*980mm Package size:1010*1010*340mm And 410*370*400mm/unit(carton)
Product application: Fasta fvp219 concrete triple tube roller paver is the most advanced machine used for all kinds pavement, road, square, airport to make the road smoothing. It is specially designed for road construction. It is a combination of the concrete roller paver and concrete vibrators. This unique design helps the machine to reduce large quantity needs of labors and highly improved the working efficiency. Main features: 1.The concrete vibrator paver is the combination of concrete roller paver and concrete vibrators. Highly Improved the efficiency of road construction. 2.Customized concrete vibrator paver, the length of the machine will be desighed according to the needs of our customer, 3-8m are all available. 3.50cm-distance between every two vibrators. 4.Meet strict flatness and levelness specifications. 5.Easy operation helps to reduce large quantity needs of labors. Working width:3-6m Max insert vibrator depth:300mm Travel speed:0-3m/min Dia of roller:219mm Quantity of roller:2 roller and 1 auger Roller rotation rate:36rpm Vibrators detail: 50mm 2m Add 50cm length, with one concrete vibrator Material of machine body:iron Electric motor:380v/50hz Vibrator motor power:1.5kw Lifting motor power:1.5kw Traveling motor power:3kw auger motor:4kw
Damper pulley.
