Description Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage. 3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it. 7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank. 2. Store it in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting. 2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively. 3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose. 4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour. 5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions. 6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode. 7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization. 8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers. Uses and Dosages 1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing. 2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%. 3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely. Package, Storage & Handling 1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months. 4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 16 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete. When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration. 3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it. 7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank. 2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Naphthalene Sulfonate (UNF-5) concrete admixture, a high range water reducer with no air entraining, is commonly referred to as a superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (UNF-5) concrete admixture is made of naphthalene, sulfonic acid, formaldehyde and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (UNF-5) concrete admixture contains no chloride. It complies with chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (UNF-5) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (UNF-5) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (UNF-5) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4.Naphthalene Sulfonate (UNF-5) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (UNF-5) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (UNF-5) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water reducing rate: It has remarkable dispersion and water reducing effect. Its water reducing rate is over 20%. 2. High slump flowability and strength: It enhances the miscibility, fluidity and smoothness of concrete at a regular water/cement ratio and improves the bond stress between concrete and steel bars. 3. Saving cement: It may save cement by 12-25% without sacrificing slump retention and strength. 4. Early Strength and Strengthening Ability: It improves the compressive strength of concrete at same cement quantity and slump loss. 5. Great Compatibility: Naphthalene Sulfonate (UNF-5) concrete admixture can be added to a variety of concrete and improves the physical and mechanical functions of it. By reducing the heat of concrete hydration, it significantly enhances the impermeability of concrete. 6. Improved Compactness: Naphthalene Sulfonate (UNF-5) concrete admixture develops a better pore structure and makes the concrete more compact. It produces high durable concrete of which the anti-infiltrating index is beyond P18. Uses and Dosages 1. Prepare solutions as required. 2. Naphthalene Sulfonate (UNF-5) concrete admixture can be added directly or added in after being dissolved into water. It can be added during mixing and after mixing. The afterward approach can achieve better result. 3. The agent can be combined with other externally applied agents if compatibility test is satisfied. 4. When Naphthalene Sulfonate (UNF-5) concrete admixture is applied in the form of powder, normal dosage ranges from 0.5% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.75% considering technical and economic factors. Package, Storage & Handling 1. Naphthalene Sulfonate (UNF-5) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (UNF-5) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It remains effective in one year. 4. Since Naphthalene Sulfonate (UNF-5) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 15 tons loaded in a 20ft container.
L block machinery, interlock machinery, mosaic tile machinery, bricks machinery, marble and granite machinery and equipment, marble granite slabs and dimensional products, blocks machinery, block mould.
Wall painting, wood, metal chemical & waterproofing.
Construction and building materials. steel, iron, wood, concrete, cement, and ceramics..
Fabrics, yarns, machinery, agriculture products, faucets, vegetable oil, whipped cream.Import, export, distributor and agent
Concrete block machine, block making machine(qt6-15, u8-15, qt9-15), brick making machine, paver making machine, hollow block making machine, cement block machine, kerbstone making machine, brick molding machine, block molding machine.
Automatic flyash brick making machine, automatic paver block machine, automatic concrete paver block machine, automatic interlocking paver block machine, hollow block machine.
Tile grout , adhesive, waterproof.
Pig, sheep breeding equipments, poultry breeding equipments, plastic products, garage floor tiles.Trade, export
Ceramic tiles and ceramic raw materials.
Exporting marbles and granite and building constructions.Transportation and shipping
Product Introduction: Energy is an important material basis for human survival and development, since entering the 21st century, energy conservation and emission reduction has become the common goal of the development of countries around the world, insulation materials have been a large number of development and application. 1050 degree high temperature resistant calcium silicate board with low thermal conductivity, light weight, high strength, high temperature resistance and other excellent properties, become one of the most promising thermal insulation materials. Calcium silicate board is mainly made of silicon powder, calcium powder, natural wood pulp by high temperature and high pressure steam curing made of low, medium and high density new environmental protection insulation material. Product features: Calcium silicate board has good fire resistance, high temperature resistance, waterproof, light weight, easy to cut and other properties. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, as well as electric power, machinery, electronics, shipbuilding and other industries of insulation. Calcium silicate is a common substitute for asbestos and is a safe insulating material. Calcium silicate is one of the most widely used fire-resistant materials in Europe. Europeans are more inclined to use calcium silicate as cladding. When smelting metal ores, silica reacts with calcium carbonate to form this substance, forming slag. Product use: Metallurgical industry: heating furnace, holding furnace, annealing furnace, high temperature flue, hot air pipeline. Petrochemical: heating furnace, ethylene cracking furnace, hydrogenation furnace, catalytic cracking furnace, petrochemical heating furnace hot surface lining. Cement industry: rotary kiln, decomposition kiln, preheater, three air pipe, kiln cover, cooling machine, brick, castable spare heat preservation. Ceramic industry: tunnel kiln and tunnel kiln core, plate, ceramic kiln hot surface lining. Glass industry: melting furnace bottom, furnace wall. Power industry: Preheating furnace tubes. Non-ferrous metal industry: electrolyzers. Shipbuilding: Deck finishing. Other: It can also be used in ovens, barbeques, fireplaces, etc.
The 1000â?? high temperature calcium silicate insulation board is composed of hard calcium silicate carbohydrate and reinforced fiber, does not contain asbestos, the highest heat resistance temperature of 1050, is an efficient energy-saving product. With high heat resistance temperature, strong heat insulation performance, low volume weight, high strength, good durability, corrosion resistance, cutting, sawing and other excellent construction characteristics, can be widely used in kiln energy saving and heat preservation projects. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, and electric power, machinery, electronics, shipbuilding and other industries of thermal insulation. Calcium silicate is a common alternative to asbestos as a safe insulation material. Calcium silicate is one of the most widely used materials for fire prevention in Europe. Europeans are more inclined to use calcium silicate as cladding. In smelting metal ores, silica reacts with calcium carbonate to form this substance to form slag. 1050 degree high temperature resistant calcium silicate board has: 1. Good durability, can withstand the continuous heat load within the high temperature limit. 2. Low thermal conductivity and high adiabatic performance throughout the use range. 3. Light weight, high specific strength. 4. Good durability, long-term use without powder phenomenon. 5. Strong construction applicability, with ordinary woodworking tools can be cut products at will. 6. Safe and hygienic use. Free of asbestos, sulfur, chlorine and other toxic substances. 7. Not afraid of wet water, product performance unchanged after drying. 8. Protect high temperature equipment and extend the service life of equipment
Calcium silicate board main material of the products are SiO 43%, CaO 44% and reinforcing fiber. The products are made by stirring, heating, gelling, forming, pipe hardening and drying. With light bulk weight, Low thermal conductivity and high bending and compressive strength character, using in construction. Petroleum, electric power and Building partition wall, curtain wall, roof and building envelope thermal insulation. Features 1 - Obvious cooling 2 - Good durability 3 - High rate strength 4 - Easy construction 5 - Enviromental protection Application 1 - Electrical and Mentallurgical equipment heat insulation 2 - Cement klinã??Industrial coke oven heat insulation 3 - Glass furnace equipment heat insulation 4 - Regenerative heating furnace thermal insulation 5 - Cement rotary thermal insulation
This is Satyazit sebastian Former Mariner From Ancient Mariners N Cowboys Corporation ( A Management Corporation) We are dealing in 1.All kind of raw materials 2.All kind of heavy metals 3.All kind of construction materials 4.All kind of scraps and metals 5.All kind of automotive 6.All kind of oil n gas 7.All kind of marine industry equipments spare parts and pipeline projects 8.All kind of real estate Worldwide
Tile leveling wedges : 5mm/250pcs/047USD-EXW 10mm/250pcs/1,10USD-EXW Tile leveling wedges eco : 100pcs / 1,45USD-EXW Brand name : ORBOFIX Origin : Made in Turkey Payment : TT, LC %30 in front at purchase, %70 before loading Whole Sale Price Minimum Order Quantity : 3000
CASTABLES
