Abrasive sand screen Abrasive mesh sanding screen, not only suitable for plaster , metal, woodworking, plastic and enamel surface. And also for sanding rusty spots of metal materials and making grinding and polishing treatment. It's flexible ,can be used for sanding contoured and irregular surfaces and fully Waterproof can be rinsed to allow for reuse. Because of the open screen design, it resists clogging and both sides coated with abrasive grinds of the screen . The grinding and cutting efficiency and durability is far beyond the conventional abrasive material. It can be finished as sheets, discs, rolls and so on. Sheets: 3-2/3" x 9", 3-2/3" x 11",3-5/16" x 11", 4-3/16" x 11",9" x 11". Discs: Diameter 15",16",17",18",19".
Abrasive sponge Sponges are made of the highest quality materials and coated with aluminum oxide or silicon carbide. Abrasive sanding sponges are washable, re-useable, crease resistant, and last up to 10x longer than conventional sandpapers while giving a much finer finish. APPLICATION: Abrasive sanding sponges are widely used in the manufacturing of furniture and cabinetry as well as auto body repair. Used on wood, metal, paint, drywall and plastics
Powder coating equipments
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding. Size 6
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding. Size 6
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding. Size 6
Black Single Plate Easel is a beautiful and decorative way to display your favorite plate, work of art, or book. It has a simple design that will not distract from the item the easel is holding. Size 6
The glass table looks great in any home with its warm colours - The tone matches any interior decoration, whether retro, modern or vintage.Simple and generous design,but also has a small and flexible, very useful for the placement of life items. Size 40 X 72 X 50 CM
fast color change plastic powder coating booth: 1.Product  Description The PVC powder coating booth is very easy to clean,and fast color change only in 20 minutes. PVC Powder Coating Booth provided by us are well known for their quality and durability. These PVC Powder Coating Booths are fabricated by using qualitative raw material.These Powder  Coating  Booths  are appreciated in the worldwide market.These  Powder Coating Booths are offered at the market leading rates.
Powder particles are moving by the airflow created by the suction fan and are prevented to exit out upon filtering. Suction fan is mounted at the top of the booth. Air movement generated by the fan carries the powder particles to the filter unit and collects them to the outer surface of the filters. Filters are cleaned by means of the pull-reverse cleaning system during the operation. Powder particles are collected manually from here and can be sifted if reused. The sieve system is not included in the cabinet. It is designed as open type, one-sided for manual powder coating. Electrical installation and electrical control panel is available on the system.
Y post star-shaped pickets, features its three-pointed star shaped cross section. The tapered ends make it easy to be installed and the plain head is engineered for easy hammering the post into ground. Due to its high quality and stability, it is popular with most Australians, New Zealanders. 1. Material: low carbon steel , Q235 ,Q195, Q215 2. Surface Black / PVC-Coated/Hot dip galvanized/bituminous painted FAQ Q1: Are you manufacturer? A: Yes, our factory is located in tianjin. Q2: How to proceed an order ? A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly Customer confirms the samples and places deposit for formal order. Fourthly We arrange the production. Q3:Can I have a sample order ? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q4: Payment term and Delivery time a) TT b) LC AT SIGHT c) cash d) 30% contact value as deposit ,the blance 70% be paid after received the copy of B/L e) 15-20 days after received your depsit Q5:What is MOQ ? 1000 piece as MOQ , we can also produce sample for you. Q6: How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we will send new goods with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Item name free sample powder coating cylinder gas spring Workinglife 80000times Length,Force,Storke,Diameter depend on your demand Package one pair in one paper carton Warranty 3years MOQ 1000peices Port Tianjin Lead time depend on the quatity of your order ODM/OEM welcome Free sample avalible Payment Term T/T&Western Union
Product Name: BNC Nail Polish Care Soft Oil Base Coat Top Coat Weight: 57g Size: 3.3*4.8cm Capacity: 15ml Features: The pink one is calcium base coat,the yellow one is oill,the white one is softener and the transparent one is top coat. How to use: Step 1. Trim your nails into a desired shape and apply a layer of base coat. Step 2. After the base coat drying, evenly apply nail polish. Step 3. After the nail polish drying, apply a thin layer of top coat evenly.
Crucible type vacuum metalizing machine metallizer applied in gold or silver coating. Also used for PET plastic film Vacuum chamber: rectangle or round chamber type Application: gold or silver wire coating Performance: faster, higher ,efficient, much stable Advantage: better uniformity, no sputtering ,no pin hole, better fastness of coating film layer. Control system: SIEMENS structure, PLC control, higher accuracy AC variable frequency consistent tension winding system Vacuum system: equip big power pump group and Polycold, suitable for any environment. Induction heating type evaporating source is applied to coat Al film with winding vacuum metalizing machine. put the crucible of Al ingot into the central of wire coil(not touch),connect high frequency inside the wire coil, make Al ingot produce current and heat it temperature until evaporating. induction coil is made of copper pipe and filled with cooling water. in order to make film laye r much uniformity, each power of crucible coil could be controlled separately ,this equipment its evaporating rate is 10 times bigger than evaporating boat. evaporating source: high frequency induction heating, graphite crucible induction heating, avoid traditional thickness, make sure least pin hole, winding speed up to 8-11m/s, totally meet market requirement. High quality core parts:1, SIEMENS motor 2, GERMANY Leybold pump 3, Imported SKF bearing 4, High quality Polycold system 5, Main and sub roller cooling system Character: 1. All kinds of crucible coil can be adjusted separately in order to distribute vacuum coating film uniformly. 2. Evaporation speed is fast, so film and wire deviation, wire stuck and block wire fault would not exist. And the filigree yields of thickness distribute evenly to avoid burning of plastic. The quality of coating is more excellent, the phenomenon of the pin hole is less. 3. The evaporation rate of induction-heating roller coating machine is large. It is about 10 times larger than resistance heat source of evaporation boat. 4. In contrast with resistance heating coating, the distinguishing feature of vacuum metallizer equipment is that aluminum block could be enough dissolution and degassing, then form into the stable molten pool and eliminate the sudden sputtering of big droplet. 5. Evaporation source is filled with charge materials. The operation is simple and the temperature is easy to control. The source has much less strict requirements for purity aluminum ingots.
PRODUCT HIGHLIGHTS Graphite filled electrically conductive Non-magnetic Offers good lubricity Ideal for static dissipation and grounding First-rate dimensional stability Very good shielding against EMI/RFI Kohesi Bond KB 1085-1 is a two component, graphite filled epoxy system suitable for bonding, sealing and coating. It has a favorable 100:15 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and a outstanding dimensional stability. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours. KB 1085-1 offers a volume resistivity of 50 - 100 ohm-cm. This makes it ideal for static dissipation, grounding and EMI/RFI shielding applications. Being graphite filled, this product is non-magnetic in nature and offers slight lubricity. It offers an extensive serviceable temperature range of -50°C to +120°C. It is a phenomenal adhesive that offers superb physical strength properties and adheres well to a wide variety of substrates including metals, ceramics, most plastics and glass. In addition to superior electrical, it also offers astounding chemical resistance to a variety of acids, bases, oils and water. Part A and Part B are black in color. Owing to its versatile performance, KB 1085-1 is widely used in electronics, aerospace, semiconductor, microwave and many OEM applications where a non-metallic conductive epoxy is required. z
PRODUCT HIGHLIGHTS Superior thermal conductivity Excellent toughness Convenient 1:1 mix ratio First-rate thermal conductivity Exceptional electrical insulation properties Capable of passing NASA low outgassing Kohesi Bond TUF 1621 AOHT is a two component, room temperature curing epoxy system suitable for bonding and sealing. It is capable of passing NASA standards for low outgassing (ASTM E-595) and has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This unique epoxy system offers remarkable toughness and superior peel strength. It readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours. TUF 1621 AOHT is thermally conductive and it can withstand very high temperatures. It offers an extensive serviceable temperature range of -70°C to +200°C. This phenomenal adhesive fosters outstanding resistance to mechanical and thermal shocks. It offers exceptionally high lap shear strength (> 3,300 psi). TUF 1621 AOHT adheres well to a wide variety of substrates including metals, ceramics, most plastics, rubbers and glass. In addition to superior electrical insulation, it also offers very good resistance to various chemicals, such as water, oils and fuels. Part A and Part B are off-white in color. TUF 1621 AOHT is widely used in electronic, optoelectronic, vacuum, aerospace and related industries. z
PRODUCT HIGHLIGHTS Unrivaled electrical conductivity Offers cost effectiveness Very good shielding effectiveness Resists more than 370°C Effective moisture barrier Ease of application Kohesi Bond KB-SS-SCN is a silver coated nickel filled, sodium silicate based coating system. Firstly, this product offers very good electrical conductivity. This products offers very high levels of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI), along with cost effectiveness. Shielding effectiveness is extremely critical for electronic devices, since energy from various appliances such as radios can interfere with their performance. Our conductive coatings are usually applied to housing substrates to protect the devices from any such interference. Shielding effectiveness is measured by attenuation, which refers to the difference in an electromagnetic signal's intensity before and after shielding. The unit of measurement is in decibels (dB). Achieving shielding at higher frequencies is extremely challenging. From 1-2 GHz, KB-SS-SCN's effectiveness is in the range of 75-42 dBs, similar to an aluminum reference. This rating slowly declines to 56-42 dBs at 2-15GHz and further down to 50 dBs at 18 GHz, at which point it stabilizes. It should be noted that the decibel range of attenuation falls along a logarithmic scale. A 10 dB difference in attenuation indicates a 10 times change in shielding effectiveness. KB-SS-SCN has a wide serviceable temperature range of -18°C to +370°C. It is a water based system, making it relatively non-toxic. This product can be easily applied with a brush or a spraying system. It can cure at room temperature in 1-2 days or it can be heat cured at 80°C for 1-2 hours. z
PRODUCT HIGHLIGHTS High glass transition temperature Resists thermal and mechanical shocks Very good flow properties Superior chemical resistance Exceptional electrical insulation properties Phenomenal toughness Kohesi Bond TUF 1452 HT-2 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 100:40 (Part A: Part B) mix ratio by weight or 100:50 (Part A: Part B) mix ratio by volume. This unique epoxy system offers remarkable adhesion to wide variety of substrates including metals, ceramics, most plastics and glass. It readily cures at room temperature and can achieve faster cures at elevated temperatures. The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C - 90°C for 3 - 5 hours. TUF 1452 HT-2 is a toughened system, offering low exotherm and a long working life. It can withstand multiple cycles of thermal and mechanical shocks. It offers an extensive serviceable temperature range of -60°C to +220°C. This phenomenal adhesive fosters outstanding physical strength properties as well as dimensional stability. It offers minimal shrinkage upon cure and is suitable for medium sized castings. In addition to superior electrical insulation, it also offers astounding chemical resistance to a variety of acids, bases, solvents, fuels, oils and water. Part A has a tan-brown color and Part B has an amber color. TUF 1452 HT-2 is widely used in the electronics, aerospace and various OEM applications. z
Magnetron sputtering coating machine is widely used in coating gold & silver on film , and decorative pieces of plastic, metal pieces (watches, mobile phone sasing, sanitary ware, car wheels, ect), glass or plastic lenses, tools, dies and other fields. also used for sputtering metal, non-metallic material or alloy materials. This series machine is our company newest design with the top technical in china. Widely used in all kind of fields. Especially used for gold and silver coating film, minimum waste (within 10%) and maximum the working efficient. this equipment also metalize each kind of film like solar film, lower radiation film, ITO transparent conductive etc on plastic basis material by magnetron sputtering. Mainly used in front screen and window film on automobile, train, steamboat, door or window film or architecture, anti-statics and electromagnetic film, decorating film and packing film, anti-frost and fog transparent film etc. Adopt man-machine interface and PLC control, completely function�?clearly interface, any operation and all parameter settle could be done on touching screen, reduce complex operating panel, make it more easy and accurate and humanity to control and operate, evaporating current could be increased or reduced unified or separately on panel , all button operating , convenient and quickly, there is an buzzer installed, if any alarm, buzzer would make sound and warn operator , there is another emergency button, which could stop the moving cart when emergency happens. High quality core parts:1, SIEMENS motor 2, GERMANY Leybold pump 3, Imported SKF bearing 4, High quality Polycold system 5, Main and sub roller cooling system Features: 1. The operation is simple and convenient. 2. The adhesive power is stronger. 3. The uniformity of film is superior. 4. The layer of film is delicate and flat
This machine is dedicated to the painting and sanding of the edge. Speed: 5-8 m/min, Rolling Device: Using the vertical coating device. Paint can be recycled Drying Device: UV lamp Sanding Device: Abrasive belts & Abrasive wheels
