introduction of Iron Oxide Slurry Bench top Color Reader Color Tester CS-800 1).Iron Oxide Brief Introduction Pigment is a very important chemical raw material. It is widely used for painting industry, ink industry, plastic industry and other industries. It could be roughly separated into organic pigment or inorganic pigment. Iron oxide is called excellent dying organic pigment. Because of the large production quantity of iron oxide, the color quality control for the Iron Oxide becomes a very essential part. 2).Our device Comparing With Imported Instrument In the Iron Oxide production industry, most factories choose imported colorimeter from USA. The device prices are high and troublesome for the warranty. Now we have good news. After being tested, the testing result of our device is not much difference with the imported device. We have the advantage of lower price and easier maintenance. 3).How to test with our device CS-800 Bench top Color Reader Color Tester? Mix the Iron Oxide powder with printing ink to make it into slurry. And then paint it on the white paper(we will call it- sample paper). In order to keep the clean of the device, we need find the other paper and cut a hole with diameter 11mm (same with the testing port of CS-800). And then cover it on the sample paper ( the testing material should be naked) and then put it on the testing port. With this method, we will get the color difference data for the two samples. 4).Technical Data Type:CS-800 Illumination:d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards) Size of integrating sphere:Φ40mm,Alvan diffused reflection surface coating Illumination Light source:CLEDs(entire wavelength balanced LED light source) Sensor:dual light path sensor array Wavelength range:400-700nm Reflectivity range:0-200% Measurement light source:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF Data being displayed: reflectance value/data, sample's color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate measurement report Measurement time:About 1 second Measurement time interval:0.5 second Measuring caliber:Φ11mm Color space:CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK Color difference formulas:E*ab,E*CH,E*uv,E*cmc(2:1),E*cmc(1:1),E*94,E*00, Eab(Hunter),555,color classification Other colorimetric indices:WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Standby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density,E density, M density Repeatability:light splitting reflectivity: standard deviation within 0.08% color values:E*ab
