introduction of Iron Oxide Slurry Bench top Color Reader Color Tester CS-800
1).Iron Oxide Brief Introduction
Pigment is a very important chemical raw material. It is widely used for painting industry, ink industry, plastic industry and other industries. It could be roughly separated into organic pigment or inorganic pigment. Iron oxide is called excellent dying organic pigment. Because of the large production quantity of iron oxide, the color quality control for the Iron Oxide becomes a very essential part.
2).Our device Comparing With Imported Instrument
In the Iron Oxide production industry, most factories choose imported colorimeter from USA. The device prices are high and troublesome for the warranty. Now we have good news. After being tested, the testing result of our device is not much difference with the imported device. We have the advantage of lower price and easier maintenance.
3).How to test with our device CS-800 Bench top Color Reader Color Tester?
Mix the Iron Oxide powder with printing ink to make it into slurry. And then paint it on the white paper(we will call it- sample paper). In order to keep the clean of the device, we need find the other paper and cut a hole with diameter 11mm (same with the testing port of CS-800). And then cover it on the sample paper ( the testing material should be naked) and then put it on the testing port. With this method, we will get the color difference data for the two samples.
4).Technical Data
Type:CS-800
Illumination:d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards)
Size of integrating sphere:Φ40mm,Alvan diffused reflection surface coating
Illumination Light source:CLEDs(entire wavelength balanced LED light source)
Sensor:dual light path sensor array
Wavelength range:400-700nm
Reflectivity range:0-200%
Measurement light source:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF
Data being displayed: reflectance value/data, sample's color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate measurement report
Measurement time:About 1 second
Measurement time interval:0.5 second
Measuring caliber:Φ11mm
Color space:CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK
Color difference formulas:E*ab,E*CH,E*uv,E*cmc(2:1),E*cmc(1:1),E*94,E*00,
Eab(Hunter),555,color classification
Other colorimetric indices:WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Standby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73),
Tint(ASTM E313,CIE,Ganz),metamerism index Milm,
adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density,E density, M density
Repeatability:light splitting reflectivity: standard deviation within 0.08%
color values:E*ab
4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /
YS3060 Grating Spectrophotometer with UV SCI/SCE Bluetooth YS30 Series grating spectrophotometer adopts bluetooth and USB dual modes for wider use, and with SCI & SCE measurement data, it is compatible with many famous brands. 8mm, 4mm or customized aperture is optional. Speical UV light makes YS3060 easy to measure sample with UV and high accuracy and extended function PC software let it be good partner for colorist and color quality contral management. YS3060 UV Grating Spectrophotometer Full Illuminants + UV, 8mm&4mm Apertures, SCI&SCE, Bluetooth Comm, High Precision. YS3020 Grating Spectrophotometer Multi-illuminants, Customizable Aperture, SCI&SCE, Bluetooth Comm, High Precision. YS3010 Grating Spectrophotometer 4 Illuminants, 8mm Aperture, SCI&SCE, Good Precision. Comply with CIE No.15�?GB/T 3978,GB 2893,GB/T 18833,ISO7724/1,ASTM E1164,DIN5033 Teil7, YS3010 color spectrophotometer features only 8mm single aperture. Both SCI and SCE mode makes it widely use in many applications. It has high accuracy 0.06 based on white calibration plate measured 30 times at 5 seconds intervals after white calibration was performed. YS3010 Handheld Spectrophotometer with 8mm Single Aperture Features A.Perfect combination of beautiful appearance and the human body mechanics structural design; B.D/8 geometrical optics, conforms with CIE No.15,GB/T 3978,GB2893, GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil C.Use long life and low power consumption combined LED light source D.Switchable 8mm/4mm aperture, support both SCI and SCE at the same time; E.Measure sample spectra, accurate Lab data , can be used in color matching and accurate color transmission; F.High electronic hardware configuration: 3.5-inch TFT color LCD,Capacitive Touch Screen, concave grating, 256 Iimage Element Double Arrays CMOS Image Sensor; G.USB port, widely useful; H.Super stain-resistant and stable standard white calibration plate; I.Large capacity storage space, over 20,000 measurement data; J.Two standard observer angles, a variety of illuminant, a variety of color indexes, conforms with a variety of standard colorimetric data, meet a variety of customers' demand for color measurement; K.Camera Locating Function, better position; l.PC software has a powerful function extension.
it is mainly used for color cement, color cement floor tiles, color cement tiles, imitation glazed tiles, concrete floor tiles, color mortar, color asphalt, terrazzo, mosaic tiles, artificial marble and wall painting. 2. It can be used for colouring and protecting substances of various coatings, including water-borne interior and exterior wall coatings, powder coatings, etc. It can also be used for various primers and topcoats such as epoxy, alkyd, amino, etc. in oily paints, as well as for toy paints, decorative paints, furniture paints, electrophoretic paints and enamels. Iron red primer has anti-rust function, can replace high-priced red red paint, save non-ferrous metals. The manufacturer supplies iron oxide red, iron oxide green, iron oxide blue, iron oxide yellow, iron oxide violet, iron oxide brown, iron oxide black and so on. The color is complete, the quantity is large and the discount is favorable. Support mixed batches. Welcome to call for consultation.
Supplier: Milk powder, acasia catechu (kattha), weighing scales and measures
4Benzyloxyphenol is a topical depigmenting agent that can decompose melanin in the skin prevent the formation of melanin in the skin and restore the skin to a healthy color without damaging the melanocytes thereby achieving decolorization The role Clinically it is mainly used to treat hyperpigmentation such as various stains age spots vitiligo melanoma etc 4Benzyloxyphenol Pbp Powder CAS 103162 Monobenzone Application 1Monobenzone is the monobenzyl of Monobenzone occurs as a white almost tasteless crystalline powder soluble in alcohol and practically insoluble in water 2Monobenzone is the monobenzyl of Monobenzone powder can be compounded to make a depigmenting cream It is used to whiten patchy skin and create and even skin tone that is pale and smooth 4Benzyloxyphenol Pbp Powder CAS 103162 MonobenzoneHow to make order payment PI will send to youWe can accept payment by Bank TTWestern Union and Credited Card as well The correct process information is that you confirm how much quantity you need we will calculate the total amount for you including the freight confirm that there is no problem to draft the order or PI you arrange the payment we will arrange the shipment to you complete
Place of Origin Hebei China Other Names 25DIMETHOXYBETANITROSTYRENE MF C10H11NO4 Grade Standard Industrial Grade Agriculture Grade Appearance yellow powder Application making linoleum fuel and carbon Keywords 40276117 Product Name 25DIMETHOXYBETANITROSTYRENE MF C10H11NO4 refractive index 15400 density 1197 boiling point 34855C Melt Point 116120 C Color Brown Molecular Weight 2092
Product Name:Allantoin CAS:97-59-6 MF:C4H6N4O3 MW:158.12 EINECS:202-592-8 Mol File:97-59-6.mol Melting point:230 �°C (dec.)(lit.) Boiling point:283.17�°C (rough estimate) Density 1.6031 (rough estimate) refractive index 1.8500 (estimate) Flash point:230-234�°C storage temp. Refrigerator solubility H2O: soluble0.1g/10 mL, clear, colorless form Powder pka8.96(at 25�ºC) color White Water Solubility Slightly soluble in water. Freely soluble in alkalis Decomposition 230-234 �ºC Merck 14,258 BRN 102364 Stability:Stable. Incompatible with strong oxidizing agents.
Product Name Phenylethyl Resorcinol Other Name Symwhite 377 Powder Einecs No. 480-070-0 purity 99%min CAS NO 85-27-8 MW 214.26 MF C14h14o2 Color White Test HPLC Storage Temperature Cool Dry Place Phenylethyl Resorcinol is served as a newly lightening and brightening ingredient in skin care products with better stability and security, which is widely used in whitening, freckle removing and anti-aging cosmetics. 1. It has an outstanding whitening effect to skin. It is reported that it is one of the highest active tyrosine kinase inhibitors, which is 22 times higher than Kojic acid. 2. It is an antioxidant that is considered effective in influencing the formation of pigmentation, B16V, which is 210 times better than Kojic acid and 32 times than Arbutin. It could balance skin color and relieve the chromatosis caused by ultraviolet. 3. It served as an anti-oxidant agent with better performance, which is better than VE/VC/BHT 4. It is easily dissolved with dissolvability of 1% in glycol and easy to be added. Meanwhile it has better stability and security. 5. Dosage: 0.1-1.0%
Product Parameters Appearance: brown viscous liquid. Characteristics: 1. LABSA 96% for detergent. 2. The product has the action of detergency, moistening, foaming, emulsion, dispersion and brown viscous fluid in appearance with acidity. 3. It is non-flammable, quickly dissolved in water, not dissolved in normal organic solvent. 4. The product has strong absorbency. 5. It would be unclear viscous liquid after absorbed water. Main indexes: Index Standard Appearance Brown viscous liquid Active content by wt % 96 min Free oil by wt % 1.5 max Sulfuric acid by wt % 1.5 max Color (Klett) Hazen (50g/L water sol.) 35 max Main Application 1. Hair shampoo, bath shampoo, dish detergents and complex soap, laundry powder, dishware cleaner in daily chemical industrial. 2. Wetting and clearer , dyeing assistant in textile industry. 3. Degrease agent in electroplate and leather manufacture. 4. De-inking agent in paper making.
