Material Classification: PE100, PE4710 Standard : ISO 4437, ASTM D3350. AS/NZS 4130-2009. OD range: 20mm-630mm Dimensions : Nominal diameter(DN) Mean outside Diameter(Dm) Maximen out of Roundness Wall Thickness(T) Min.Max.SDR11 SDR17 MIN.MAX.MinMax 2020.020.31.2 3.0 3.42.42.8 2525.025.31.2 3.0 3.42.42.8 3232.032.31.3 3.0 3.42.42.8 4040.040.41.4 3.7 4.22.42.8 5050.050.41.44.65.22.42.8 6363.063.41.55.86.53.03.4 7575.075.51.66.87.63.64.1 9090.090.61.88.29.24.34.9 110110.0110.72.210.011.15.36.0 125125.0125.82.511.412.76.06.7 140140.0140.92.812.714.16.77.5 160160.0161.03.214.616.27.78.6 180180.0181.13.616.418.28.69.6 200200.0201.24.018.220.29.610.7 225225.0226.44.520.522.710.812.0 250250.0251.55.022.725.111.913.2 280280.0282.69.825.428.113.414.9 315315.0317.911.128.631.615.016.6 355355.0358.212.532.335.616.918.7 400400.0403.614.036.440.119.121.2 450450.0454.115.641.045.121.523.8 500500.0504.517.545.550.123.926.4 560560.0565.019.651.056.226.729.5 630630.0635.722.157.363.130.033.1 PhysicalNominal ValueUnitTest Method Density 20.949g/cm³ISO 1183 Melt Mass-Flow Rate (MFR)190°C/21.6 kg6.2g/10 minISO 1133 Tensile Modulus (2.00 mm, Compression Molded)850MPaISO 527-2/1BA/50 Tensile Stress (Yield, 2.00 mm, Compression Molded)23MPaISO 527-2/1BA/50 Tensile Strain (Yield, 2.00 mm, Compression Molded)10%ISO 527-2/1BA/50 Flexural Creep Modulus - 4 point, 1 min-value 1.05GPaDIN 19537-2 Charpy Notched Impact Strength (23°C)25kJ/m²ISO 179 Brittleness Temperature< -80.0°CASTM D746 Vicat Softening Temperature74°CISO 306 Oxidation Induction Time (210°C)> 20minEN 728 Melt Temperature190 to 220°C z