Features Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display  Usb & vga interface Software upgrade via usb interface Specifications Model Kl-300t Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µm)    16mm(coating diameter: 250 ~ 1000µm) Fiber diameterCladding diameter:80 ~150µm  coating diameter:100~ 1000¦ìm Fiber countSingle Fiber aligning methodCore or clad aligning Image processing methodDigital Actual average splice loss0.02db(sm),  0.01db(mm), 0.04db(ds),  0.04db(nzds) Splicing timeTypical 9 sec, with standard sm fiber Splicing mode53(templet), 40(user) Splice loss estimateMore accurate Return loss>60db Storage of splice result4000 results, 20 parameter per result Fiber display and magnification300x(x or y view), 150x(x and y view) Tube heating timeTypical 30 sec Tube heating mode9(templet), 24(user) Tube heating temperatureCan be adjusted Applicable protection sleeve length60mm, 40mm and a series of micro sleeves Tension test2n Electrode life2500 No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery Display screen5.6 tft inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsUsb 1.1 and vga Operating condition0 ~ 5000m above sea level,  0 ~ 95%rh and -10¡«50¡æ,  respectively,  max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x150mm (h) Weight2.7 kg excluding battery, 3.2 kg including battery.