What is a butterfly valve? Butterfly valves have a wide range of uses in the water, wastewater, fire protection, and gas supply industries, as well as in the chemical and oil industries, fuel handling systems, and power production. The basic construction, which does not take up a lot of space, as well as the lightweight and reduced cost when compared to other valve designs, are some of the benefits of this type of valve. A butterfly valve is a shut-off valve with a straightforward design. The disc stops the valve hole in the closed position, while the disc is spun to enable flow in the open position. The butterfly valve provides for rapid opening and closing by turning a quarter turn from fully open to fully closed, or the other way around. An acentric or concentric butterfly valve is the most frequent form of butterfly valve arrangement. The stem of this sort of butterfly valve travels along the middle line of the disc in the center of the pipe bore, and the seat is the inside diameter of the valve's body. This no offset valve arrangement is also known as a resilient-seated valve because the seal's dependability is dependent on the flexibility of the seat rubber when the flow is closed. The disc first interacts with the seat at roughly 85�° for a 90�° revolution in this sort of valve. In low-pressure applications, concentric butterfly valves are commonly utilized. The concentric butterfly valve is a flow control mechanism that controls the flow medium in the system with a rotary disc. The disc stays in the passage, but it provides very little resistance to the flow due to its thinness. The design of concentric butterfly valves is relatively straightforward. The basic components of a concentric butterfly valve are the body, seal, disc, and stem. A disc is positioned in the middle of the connecting pipe, and a stem is connected to the actuator or handle on the exterior of the valve in the typical butterfly valve. The disc is perpendicular to the flow when the valve is closed, and the seat of the valve is closed. APPLICATIONS Water treatment. Water Distribution. Water Transmission. Aeration System. Fire Protection Body Material: Cast Carbon steel (WCC,WCB, WC6), Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F31L, F91], DUPLEX STEEL and Super duplex Steel (F51,F53,F55) , Cast iron, Ductile Iron. Size 2 48 Class: 150 to 300; PN 6 PN 25 Ends: Wafer, flanged, lug Operations: Lever operated, gear operated, pneumatically actuated, and electric actuated.
