USD27272 /T FOB shanghai .The grade 275 is the alternative to DC-705.
Appearance...Colorless transparent liquid
Viscosity at 25ºC, mm² Per S...165
Diopter at 25 ºC...1.09 min.
Specific Gravity...1.090~1.100
Flash point, ºC...243 min.
Condensation point, ºC...-14~-18 max.
Ultimate Vacuum, PA...6.6*150-7 max.
Saturated Vapor Pressure, PA...6.65*10-8 max
Appearance: colorless transparent Liquid viscosity at 25ºc: 32~40 Diopter at 25 ºc: 1.05 min. Specific gravity: 1.050~1.080 Flash point, ºc:210 min. Condensation point, ºc: -35 max. Ultimate vacuum, pa: 3.99*10-7 max. Saturated vapor pressure, pa: 6.65*10-8 max. 200kg iron drum, 25kg or 50kg plastic drum, 950kg ibc drum.
Appearance:colorless transparent liquid Viscosity at 25ºc, mm² per s: 165 Diopter at 25 ºc: 1.09 min. Specific gravity: 1.090~1.100 Flash point, ºc: 243 min. Condensation point, ºc: -14~-18 max. Ultimate vacuum, pa: 6.6*150-7 max. Saturated vapor pressure, pa: 6.65*10-8 max 200kg iron drum, 25kg or 50kg plastic drum, 950kg ibc drum.
USD27272 /T FOB shanghai .The grade 275 is the alternative to DC-705. Appearance...Colorless transparent liquid Viscosity at 25ºC, mm² Per S...165 Diopter at 25 ºC...1.09 min. Specific Gravity...1.090~1.100 Flash point, ºC...243 min. Condensation point, ºC...-14~-18 max. Ultimate Vacuum, PA...6.6*150-7 max. Saturated Vapor Pressure, PA...6.65*10-8 max
Appearance: Colorless Tasteless liquid Viscosity mm2/25 : 110~200cs (Routine viscosity) Refractive Index ND 25: 1.4800~1.4950 Density 25: 1.020~1.080 Flash Point : 300 Freezing Point -40 Thermosteresis 250/2 Hours
Name: 275# silicone oil for super high vacuum diffusion pump Molecular formula: CH3(C6H5)2SiO(CH3)2SiOSi(C6H5)2CH3 Property and usage: 275# silicone oil for super high vacuum diffusion pump is colorless, transparent oily fluid and owns very low saturated vapor pressure, good heat resistivity property and with excellent resistance to high temperature, oxidant and radiate. It can be used in high vac., electrical industry, coating for high vac., particle accelerator, electronic microscope and display, etc. Technical data: Appearance: colorless transparent liquid Content: 99% min Ultimate vacuum: 5X10-9 Viscosity (25 °C): 165-185 Refractive index(25 °C): 1.5765-1.5785 Flash point: 243 °C Freezing point: -14°C max
V4 Borewell Submersible Pumpset Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP) - Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. Single Phase available in 0.5 HP to 5.0 HP Three Phase available in 1.0 HP to 6.0 HP - Speed : 2880 RPM - Head Range : 10 Mtr. To 340 Mtr. - Discharge Range : 450 LPM to 12 LPM - Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0 - Degree of Protection : IP 58 - Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph - Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW, 7.5 kW -1500 lbs. - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph Direct Online (D.O.L) - Maximum Starts Per Hour : 20 Times
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m�²/sec (max.) - Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Thermic fluid circulation pumps
