Stainless Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar : ASTM / ASME SB 160 UNS 2200 (NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825)
ASTM / ASME SB 166 UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601)
ASTM / ASME SB 446 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)
Range : 15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form : Seamless / Erw / Welded in Round & Square. Nickel Alloy : ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 ) ASTM / ASME SB 163 UNS 2201 (NICKEL 201 ) ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 ) ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 ) ASTM / ASME SB 704/705 UNS 8825 INCONEL (825) ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 ) ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625) ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 ) Copper Alloy : ASTM / ASME SB 111 UNS NO. C 10100 , 10200 , 10300 , 10800 , 12000,12200, 70600 , 71500 . ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Sheet and Plates Range : 5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s. Nickel Alloy : ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 127UNS 4400 (MONEL 400 ) ASTM / ASME SB 424 UNS 8825 (INCONEL 825) ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 443 UNS 6625 (INCONEL 625) ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Range: 3.17 MM TO 350 MM DIA Round BarsNickel Alloy ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 164 UNS 4400 (MONEL 400 ) ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 446UNS 6625 (INCONEL 625) ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Nickel, Nickel - Alloys And Copper - Nickel
Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
CuCrNi2Si ¿C UNS.C18000 Copper Chromium Nickel Silicon Alloys, which also called Beryllium Free Copper alloy, meets the mechanical requirements of RWMA Class 3 Copper, is a very hard heat treatable copper based alloy with an economical higher strength and high conductivity, and C18000 Alloys is utilized when a combination of very good mechanical strength along with moderate electrical and thermal electrical conductivity are required. Furthermore, C18000 alloy is an excellent substitute for copper beryllium alloys C17500 and C17510 in terms of many applications. International Specification: Rods/Bars/Plates/Sheets: UNS.C18000, CDA180, RWMA Class 3 European Standards: CuCrNi2Si, DIN 2.0855, CW111C to EN Note: ASTM: American Society for Testing and Materials RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to DIN & RWMA.
Nickel based corrosion resistant alloy casting Category:Nickel alloy casting Nickel based corrosion resistant alloy casting, the deoxidation process is strictly controlled during production. Common grades are N08830 etc.Product Description Nickel based corrosion resistant alloy casting, the material cost is higher, but the corrosion resistance is very good.It has applications in aerospace, petrochemical, machinery, marine, environmental protection, energy, food and other fields. Nickel-based corrosion-resistant alloy is based on nickel, plus some other elements, so that it can resist corrosion to a certain extent, generally has austenite structure, common nickel-based corrosion-resistant alloys are nickel-copper alloy, nickel-chromium alloy and many more. Commonly there are NS113, NS131, NS141 and other grades. Nickel-based corrosion-resistant alloys usually need to withstand the corrosion of atmosphere, water vapor, water and other substances, and most of them have austenite structure. According to different elements added, they have targeted resistance to different substances, such as high temperature chlorine resistance. The total of nickel-copper, hydroxide-resistant nickel-chromium alloy, etc.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
Supplier: Nickel Alloys, Copper Alloys, Cobalt Alloys.
