Tear Circle Sfsp568 Series Hammer Mill

1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output;
2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc;
3. Steel plate welded structure; motor and rotor are mounted on same base plate;
4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test;
5. Ensure the safe operation door is locked when the machine is in operation
6. The inlet is on top of machine for ease of operation.

1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output;
2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc;
3. Steel plate welded structure; motor and rotor are mounted on same base plate;
4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test;
5. Ensure the safe operation door is locked when the machine is in operation
6. The inlet is on top of machine for ease of operation.

1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output;
2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc;
3. Steel plate welded structure; motor and rotor are mounted on same base plate;
4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test;
5. Ensure the safe operation door is locked when the machine is in operation
6. The inlet is on top of machine for ease of operation.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00

We can supply:

CARD FLY 100% COTTON BALES.
Post industrial. Spinning mill waste.
Can load in 1x40HC container approx.. 20 MT net.

Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).

You are welcome to visit our company premises and supervise our materials.

Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.

At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.

The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%


From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:

Waste code: 10 02 10

The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.

Chemical analysis of the material is available on request.

Can supply:

LICKERIN DROPINGS 100% COTTON BALES.
Post industrial. Spinning mill waste.
Can load in 1x40HC container approx.. 20 MT net.

Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).

You are welcome to visit our company premises and supervise our materials.

Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details