1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output;
2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc;
3. Steel plate welded structure; motor and rotor are mounted on same base plate;
4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test;
5. Ensure the safe operation door is locked when the machine is in operation
6. The inlet is on top of machine for ease of operation.
1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
1. It is simple structure, safe, dependable, easy to mount and easy to operate, low vibration, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving; all of all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation 6. The inlet is on top of machine for ease of operation.
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We can supply: CARD FLY 100% COTTON BALES. Post industrial. Spinning mill waste. Can load in 1x40HC container approx.. 20 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Can supply: LICKERIN DROPINGS 100% COTTON BALES. Post industrial. Spinning mill waste. Can load in 1x40HC container approx.. 20 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
