Design features
Guided wave radar level gauge adopts advanced microwave processing technology and unique Echo Discovery echo processing technology. Contact measurement has high accuracy and more accurate measurement. At the same time, guided wave radar is anti-adhesion, not affected by external environment such as medium temperature and adhesion.
The 70X series guided wave radar level gauge is suitable for various complex working conditions and application occasions due to various process connection modes and detection components. For example, high temperature, high pressure and low dielectric constant medium, etc.
Using pulse mode, the product can be installed in all kinds of metal and non-metal containers with very low emission power, which is harmless to human body and environment.
3. Technical parameters
Application:Liquid, Powder, Solid particles
Antenna material:304/PTFE/Flexible cable
Measuring range: 30 meters
Frequency range: 1.8GHz
Accuracy: ±1mm
Medium temperature: -40 to +130 °C;-40 to +250 °C
Process pressure: -0.1ï½?4.0Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
Process connection:Thread
Protection level: IP67
Explosion-proof grade: Exia IIC T6
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
We Can Supply Freestyle Libre 2 Flash Glucose Monitoring System Sensor Please Dont Hesitate to Contact Us in Case of Any Interested
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
- Material : Stainless Steel Core, Polyethylene Yarn, Span Yarn - Number of Stitiches : 10 Gauge - Length : 14 inch - Cut Level : 5 - Color : Gray, Black, White - Packing : 1pair/individual packing (1pack=5pair, 1box=200pair) - Origin : Made in South Korea - Purpose : Cut Resistant
SPECIFICATIONS PRODUCT TYPE ANL-8260-PCBA FREQUENCY 26GHz RANGE 10m/30m/70m/80m(option) RESOLUTION 1mm ACCURACY ±10mm HYSTERESIS ±5mm DEAD-ZONE 0.6m INTERVAL 1s, subject to parameters RESPONSE TIME 5s, subject to parameters BEAM ANGLE 8 ° POWER SUPPLY 16..36VDC(24VDC typical) SIGNAL OUTPUT 4..20mA, 2-wire/4-wire COMMUNICATION HART LOAD 500 FAILURE OUTPUT No change/22mA/20.5mA/4mA(option) DISPLAY & KEYBOARD 128*64dot graphic LCD, 4keys TEMPEARTURE -40. HUMIDITY 95%RH DIMENSION 75mm x 75mm x 100mm
Runthrough Ns Extra Floppy Tw-as418xa Runthrough Ns Floppy Tw-as418fa Runthrough Ns Hypercoat Tw-ds418fh Runthrough Ns Intermediate Tw-ds418ia
The HR series dual-core radar level sensor is a non-contact, microprocessor controlled, easy to install and maintain digital level instrument. Through the antenna emitter narrow and low power microwave pulse signals, the pulse signal in the space at the speed of light transmission, encounter reflects measured medium, reflected signal is received, the pulse signal of the transmitted pulse signal and receiving time interval and the datum is proportional to the distance to the surface of the measured medium, the emitting and receiving by measuring the time interval, to realize the antenna to the surface of medium distance measurement. Built-in LCD display, convenient site setting. It doesn't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the disadvantages of pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard inconvenience. Thus can be widely used in plastics, coal, grain, sewage disposal, petroleum, chemical, food and beverage, pharmaceutical and other industries. Non-contact measurement, corrosion resistance, easy installation, high measuring accuracy, fast response, long life, good stability, large span, can be used to measure the height of liquid and solid material, in the barn, oil tank, chemical raw materials tank, sewage pool, high corrosive environment, requirements of hygiene, environment of material level measurement is widely used.
-transmitting frequency as high as 26ghz -non-contacting radar, no abrasion and contamination. -small-sized antenna for easy installation -shorter wave length, better reflection achieved on inclined solid surface -smaller dead zone, better results ensured even in cannikin measurement. -small beam angle and concentrated energy to avoid interferences. -hardly influenced by corrosion and foam -hardly influenced by changes of steam vapor, temperature and pressure -hardly impacted by heavy dust -high snr to ensure performance even under fluctuation -choice for solid media and media with low dielectric constant
Photocells Fans & ventilation, Hazardous area lighting Industrial plugs & sockets Industrial & commercial Lamps Light fittings: fluorescent, weatherproof & floodlighting Refrigeration & air conditioning spares Water heating elements Wiring accessories MCB's Circuit breaker Vacuum Breakers Control transformers Fuses & load break devices Hazardous area products Industrial beacons Industrial sounders, buzzers Industrial surge protection Safety switches Clamp meters Multi-meters Testers Semiconductors: thyristors, rectifiers Pressure switches Solenoid & pilot valves Photoelectric Sensors
