The HR series dual-core radar level sensor is a non-contact, microprocessor controlled, easy to install and maintain digital level instrument. Through the antenna emitter narrow and low power microwave pulse signals, the pulse signal in the space at the speed of light transmission, encounter reflects measured medium, reflected signal is received, the pulse signal of the transmitted pulse signal and receiving time interval and the datum is proportional to the distance to the surface of the measured medium, the emitting and receiving by measuring the time interval, to realize the antenna to the surface of medium distance measurement.
Built-in LCD display, convenient site setting. It doesn't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the disadvantages of pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard inconvenience. Thus can be widely used in plastics, coal, grain, sewage disposal, petroleum, chemical, food and beverage, pharmaceutical and other industries. Non-contact measurement, corrosion resistance, easy installation, high measuring accuracy, fast response, long life, good stability, large span, can be used to measure the height of liquid and solid material, in the barn, oil tank, chemical raw materials tank, sewage pool, high corrosive environment, requirements of hygiene, environment of material level measurement is widely used.
-transmitting frequency as high as 26ghz
-non-contacting radar, no abrasion and contamination.
-small-sized antenna for easy installation
-shorter wave length, better reflection achieved on inclined solid surface
-smaller dead zone, better results ensured even in cannikin measurement.
-small beam angle and concentrated energy to avoid interferences.
-hardly influenced by corrosion and foam
-hardly influenced by changes of steam vapor, temperature and pressure
-hardly impacted by heavy dust
-high snr to ensure performance even under fluctuation
-choice for solid media and media with low dielectric constant
Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2
Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.
VFD for biomass burner, biomass gasification burner. For electric cabinet frequency and voltage converting, to meet different countries voltage. Ensure the bioamss burner can work well.
Guided wave radar level gauge adopts advanced microwave processing technology and unique Echo Discovery echo processing technology. Contact measurement has high accuracy and more accurate measurement. At the same time, guided wave radar is anti-adhesion, not affected by external environment such as medium temperature and adhesion.
The 70X series guided wave radar level gauge is suitable for various complex working conditions and application occasions due to various process connection modes and detection components. For example, high temperature, high pressure and low dielectric constant medium, etc.
Using pulse mode, the product can be installed in all kinds of metal and non-metal containers with very low emission power, which is harmless to human body and environment.
3. Technical parameters
Application:Liquid, Powder, Solid particles
Antenna material:304/PTFE/Flexible cable
Measuring range: 30 meters
Frequency range: 1.8GHz
Accuracy: ±1mm
Medium temperature: -40 to +130 °C;-40 to +250 °C
Process pressure: -0.1ï½?4.0Mpa
Power supply: 24vDC (two-wire, four-wire optional)
Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus
PE coil pipes and tubes for water and wire cable conduit PL231
The PE coil pipes and tubes can be used:
water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm
We use new 100% pure raw PE material
WHY NEW MATERIAL HDPE PIPES?
1. Health performance
PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.
2. Corrosion resistance
It can resist various chemical media erosion, with no electrochemical corrosion.
3. Service life
Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.
4. Impact resistance
PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.
5. Connection performance
The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.
6. Construction performance
It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.
The reliability of liquid tank level sensor FS-IR2016D is high. It is not affected by liquid corrosiveness, pressure, magnetism, temperature, etc., it is less affected by external factors and has strong stability. EPT sensor is a manufacturer of liquid level sensors with 16 years of experience. We can provide corresponding solutions for all kinds of electrical equipment and other scenarios that require liquid level detection. If your steam microwave oven needs water level control, please contact us, we can provide you with food grade, hygienic, high precision, high reliability liquid level sensor to solve problems such as scale and water wall hanging.
FS-IR2016D optical water level sensor has no mechanical moving components and with high reliability. This hot selling product is small in size and low in cost. Its advantage is high liquid level control precision. And it can be installed from any direction. Its waterproofing standard is IP68. The sensor itself also satisfies RoHS requirements.
