Zbw Type Prefabricated Substation

Functional characteristics 1. The whole box body is divided into four parts: the bottom floor, the frame, the top frame and the box cover. The frame and the top frame are assembled by steel structural parts. The outer shell can be made of coloured steel plate which conforms to the heat insulation plate or steel plate. The clapboard is made of coloured steel composite plate to prevent thermal radiation and thermal guidance between different types. The exposed structural parts are treated by strict acid washing, phosphating, spraying and other processes to ensure corrosion resistance, moisture and heat resistance, mildew resistance and strong outdoor weather resistance. 2. The sub-box structure is adopted to avoid oil pollution in transformer tank. 3. Adopt new louver structure, large area of heat dissipation and ventilation, suitable for areas with strong wind. V-shaped structure design can effectively prevent rainwater from entering while enhancing ventilation. 4. Low-voltage main switch adopts circuit breakers from well-known manufacturers at home and abroad. 5. The transformer uses S11-M series fully sealed oil-immersed power transformer, which has the advantages of low loss, low noise and high efficiency. It can achieve good energy-saving effect and reduce pollution. 6. Substation has perfect protection performance, convenient operation, high and low voltage metering is optional, and can be equipped with automatic reactive power compensation device according to user's requirements.

American prefabricated substations is based on urban and rural power grid construction and development and transformation of the needs of the development of a series of products. It is the transformer body, switchgear, fuses, tap-changers, low-voltage power distribution equipment and other auxiliary equipment for the combination of transformer, to meet the user energy metering, reactive power compensation, low voltage shunt and other preparation requirements. ZGS-type modular transformer as AC 50Hz, 6 ~ 10kV network, rated capacity of 63 ~ 1600kVA independent set of power distribution equipment, both for outdoor use, can also be used indoors. Widely used in industrial parks, urban residential areas, commercial centers, high-rise buildings and temporary construction sites and other places.

USA-type Transformer Substation Box-Type Transformer Substation ZG(F)S series prefabricated substation, also called USA-type transformer substation, is an new-mode complete set of power distribution equipments that absorbs foreign advanced technology and design concept. It is also can be used in our national power girds, including these distribution systems of industrial and mining enterprises, high-rise buildings, residential areas, stations, port terminals, especially suitable for alteration of urban and rural power grids, not only reduces engineering investment and occupying area, but also shortens the installation period. Products features Novel design, innovative structure, smaller volume The high voltage overload switch, plug-in fuse and backup protection fuses are placed in transformer insulating oil tank, thus substations volume becomes smaller whose occupying area is only 1/3-1/5 of normal products. Fully enclosed, fully insulating, safe and reliable Transformer oil tank is fully enclosed structure without conservator. The high voltage inlet wire adopts connections of elbow-type cable plug and high voltage bushing, live parts sealed within the insulator, shape a fully insulating structure. Terminal surface is zero potential which can guarantee human safety. Advanced protection principle, economic and reliable, easy to operate Using full range protection mode of double fuse in high voltage side and supplemented by low voltage undervoltage protection to make operation reliable and easy. The body of transformer is used with S11,S13 series, its winding adopts Dyn11,with characteristics of neutral point not drifting, good lightning performance, low loss, low noise, etc.

European-type Transformer Substation Box-Type Transformer Substation Product introduction: XBF1,YBM series combination substation, is a complete set of equipment making the optimal combination for high voltage switch, power transformer and low voltage switch. European-type transformer substation is with such advantages complete sets of strong, small footprint, low investment, easy installation and maintenance, attractive appearance, strong weather resistance, etc. Our company can design semi-submerged or buried whole type substation based on special conditions, so as to avoid blocking the line of sight, electromagnetic interference. Normal operational conditions a, environment temperature:-25C - +40 b, altitude less than 1000 meters; c, relative humidity less than 90% (+ 25 ), to allow short-term up to 100%; d, installation place without risk of fire, explosion, chemical corrosion and severe shock e ,discuss with us for special operational conditions Product structure and appearance

Prefabricated Outdoor Power Distribution Substation is mainly used for AC 50Hz (or 60Hz), voltage 1000V and below the circuit, under the rated load can be continuous long-term work. Usually used in machine tools, mechanical equipment as electrical control lighting and light. The control transformer is working with the electromagnetic induction principle. The transformer has two sets of coils. Primary and secondary windings. The secondary coil is outside the primary coil. When the primary coil through the AC, the transformer core to produce alternating magnetic field, the secondary coil to produce induced electromotive force. The turns ratio of the Satons transformer coil is equal to the voltage ratio.

Transportation, installation and maintenance Transportation The factory substation should be filled with 25#(or 45#) transformer oil as indicated by the oil level gauge in the tank. During transportation and loading and unloading, it shall not be inverted or turned over, shall not impact the parts, and shall not be strongly shaken Special attention should be paid to the lifting hook in the lifting hook of the fuel tank, and it should be lifted slowly to avoid damage to the paint on the surface of the substation by the wire rope, and even cause the center of gravity of the whole substation to shift, tilt, and fall. Install When the substation is installed on site, pay attention to the protection of the paint on the surface of the cabinet, do not allow the handle of the barometer, oil level meter, the thermometer, plug-in fuse and insulation sleeve element to bump, crack, etc., and the screws are not loose. Clean the dust and dirt outside the substation, inside the cabinet door and on the surface of the insulation sleeve. Check whether the name plate data and product certificate of the substation are consistent with the order, and check whether documents and spare parts are missing according to the packing list. The civil diagram of the inlet and outlet of the substation cable is shown in Figure 6. Maintenance The factory products have been strictly adjusted assembly, do not need to be disassembled during installation, so as not to affect the performance, maintenance is limited to the following situations: Sample analysis of transformer oil once a year; It is found that the oil level should be supplemented in time, and the brand of oi l is the same as that in the box: After the fuse is blown, the cause should be identified, and the specifications and models should be the same as the original specifications and models when replacing the melt core.

ZS Series Rectifier Transformer,oil immersed power transformer,high quality oil transformer,oil immersed power thransformer Oil Immersed Transformer Rectifier transformers are widely used in electrolytic electrochemistry, transmission, traction, electrostatic precipitators, DC transmission and other systems which need direct current power supply. Our rectifier transformer absorbed the excellent experiences of same industry at home and abroad. Raw materials such as high magnetic silicon steel sheet and high quality oxygen free copper wire are used. We adopt production technology such as advanced integral assembly per phase for windings, the core are laminated by five step-lap method to reduce iron loss and noise, crimped winding connections, precision machining for tank surface and so on, which make technologic performance at the leading level in domestic. We can design and manufacture various types of products according to users requirement. Model and Meaning Technical Parameter of Rectifier Transformer Model No. kVARated capacity Rated Voltage  Connection Group Symbol Weight|kg KVgrid side VValve side Weight for Active parts Oil Weight Total Weight ZSS-400/10 400 10 430 Dyn11 1015 380 1780 ZSS-500/6 500 6.3 400 Dyn11 1420 580 2800 ZSS-630/6 630 6.3 400 Dyn11 1550 620 3040 ZSS-650/3 650 3 3150 Dyn11 1255 540 2460 ZSS-800/6 800 6 400 Dyn11 1576 705 3045 ZSS-1000/6 1000 6 440 Dyn11 1837 838 3580 ZSS-1000/10 1000 10 420 Dyn11 2112 897 3860 ZSS-1250/10 1250 10 440 Dyn11 2205 1090 4410 ZSS-1500/10 1500 10 3300 Dyn11 2860 1205 5260 ZSS-1600/6 1600 6.3 400 Yyn11 2680 1145 5160 ZSS-1600/10 1600 10 420 Dyn11 3110 1150 5500 ZSS-1600/10 1600 10 660 Dd0 2750 1240 5310 ZSS-1750/10 1750 10 6300 Dyn11 2790 1190 5320 ZSS-1800/10 1800 10 650 Dd0 3060 1345 5795 ZSS-1900/10 1900 10 3300 Yd11 3353 1719 7180 ZSS-2000/10 2000 10 660 Dd0 3185 1990 7750 ZSS-2300/10 2300 10 420 Dyn11 3570 1495 7020 ZSS-2400/10 2400 10 750 Dyn11 3635 1535 7185 ZSS-2500/10 2500 10 630 Dyn11 4180 1582 7390

S(B)H15-M Series Sealed Amorphous Alloy Power Transformer,oil immersed transformer,oil immersed power transformer,oil distribution power transformer Oil Immersed Transformer The transformer is completely hermetical oil-immersed type. The principle is the same as the hermetical power transformer. The basic elements of the amorphous alloy is Iron, nickel, cobalt, boron and carbon etc. Product Description The transformer is completely hermetical oil-immersed type. The principle is the same as the hermetical power transformer. The basic elements of the amorphous alloy is Iron, nickel, cobalt, boron and carbon etc. It is a kind of isotropic soft magnetic material with low magnetizing power. With 0.027mm thickness and the filling coefficient is reduced to 0.75-0.8, the amorphous alloy material is very sensitive for stress. The electrical resistivity of the material is 3-6 times of silicon steel sheet and the hardness is 5 times of it. Load loss of S(B)H15-M 30ï½?1600/6ï½?10 series transformer can be reduced by 15% on the basis of GB/T6451 standard. The no-load loss can be reduced by 70% on the base of GB/T6451 standard. Amorphous alloy transformer meets the standard JB/T10318-2002 Technical parameter of oil immersed type amorphous alloy transformer. Model and Meaning Technical Parameter of S(B)H15-M Series Hermetical Amorphous Alloy Power Transformer Rated capacityï¼?kVAï¼? Voltage and tapping range Connection Group Symbol No-load Lossï¼?Wï¼? Load Loss ï¼?Wï¼?75 No-load current (%) Short-circuit impedanceï¼?%ï¼? High Voltage (KV) Tapping ranges of High Voltage Low Voltage (KV) 30 66.31010.511 ±5% ±2Ã?2.5% 0.4 Dyn11( or ) Yyn0 130 630/600 2.3 4.0 50 170 910/870 2.0 63 200 1090/1040 1.9 80 250 1310/1250 1.9 100 290 1580/1500 1.8 125 340 1890/1800 1.7 160 400 2310/2200 1.6 200 480 2730/2600 1.5 250 560 3200/3050 1.4 315 670 3830/3560 1.4 400 800 4520/4300 1.3 500 960 5410/5150 1.2 630 1200 6200 1.1 4.5 800 1400 7500 1.0 1000 1700 10300 1.0 1250 1950 12000 0.9 1600 2400 14500 0.8 2000 750 17400 0.20 5 We are pleased to deliver Transformer, Distribution Transformer, Power Transformer, Oil Transformer, Dry Type Transformer. Safe payment and on time deliver time will give you.If you want to know more about the product, please click here.

S13 series of Three-phase oil Immersed Transformers,three phase transformer,three phase variable transformer,3 phase transformer,three phase power transformer,3 phase step down transformer Oil Immersed Transformer Model and Meaning Model No. Rated CapacityKVA Rated Voltage KV Connection Group Symbol Loss W No-load Current (%) Impedance Voltage% High Voltage KV Tapping Range of High Voltage Low VoltageKV No-load On Load S13-M*R-30/10 30 10 ±5%±2x2.5% 0.4 Dyn11Yyn0 80 630/600 0.30 4.0 S13-M*R-50/10 50 100 910/870 0.24 S13-M*R-80/10 80 130 1310/1250 0.22 S13-M*R-100/10 100 150 1580/1500 0.21 S13-M*R-160/10 160 200 2310/2200 0.19 S13-M*R-200/10 200 240 2730/2600 0.18 S13-M*R-250/10 250 290 3200/3050 0.17 S13-M*R-315/10 315 340 3830/3650 0.16 S13-M*R-400/10 400 410 4520/4300 0.16 S13-M*R-500/10 500 480 5410/5100 0.16 S13-M*R-630/10 630 570 6200 0.15 4.5 S13-M*R-800/10 800 700 7500 0.15 S13-M*R-1000/10 1000 830 10300 0.14 S13-M*R-1250/10 1250 970 12000 0.13 S13-M*R-1600/10 1600 1170 14500 0.13 Notes: The Dimension and weight will be changed according to the requirements. These two data in the table will be subject to the factory documents. We are pleased to deliver Transformer, Distribution Transformer, Power Transformer, Oil Transformer, Dry Type Transformer. Safe payment and on time deliver time will give you.If you want to know more about the product, please click here.