Itls International Development Co, . Ltd.

Description
CS-266 is solvent-free moisture curing PU adhesive. CS-266 temperature for foam or plastic, and products have properties as mentioned below :
1. Great curing speed.
2. Great bonding strength.
3. Great hydrolysis resistance.
4. Great weather resistance.
5. Great chemical resistance.

Operation
1. CS-266 can be used by roller or knife coating.
2. After coating on the foamâ??s surface, then lamination stick with rollers.
3. Pressing the foam/foam at room temperature about 180 mins approximately, and initial
binding strength can be obtained.

Description
CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water.
Itâ??s easy to mix even by hand due to our innovative water-based technology.

Features / Benefits
*Paintable easily with water-based coating; can be painted after
1 day without work delay hence reduce time and save money.
* Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens.
* Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling.
* Stronger adhesion due to higher amount of binders used.
* High solid by volume; 100% water resistant when cured.
* Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.

Descriptiion
CS-500 is a sealant mainly made by specialized rubber polymer,
compatible with surface of various materials.
Especially suitable for architectural expansion joint and crack
repairing applications.

Use
1.Used for sealing joints in applications such as curtainwall joints,
metal panel joining,bedding thresholds,secondary glazing seals.
2.Standing seam roofs, side walls, gutters and downspouts sealing.
3.Filling and caulking joints in heating and air conditioning ducts.
4.Joint sealing in sheet metal.

Feature
1.Excellent thixotropy,non-sagging during vertical application.
2.Good durability and flexibility.
3.Compatible with various kinds of paint.

Color
grey

Packaging
300ml cartridge

Product Description
Oxidized bitumen is high quality, general purpose oxidized bitumen for various applications.


Uses
Foundation damp-proofing
Built-up roofing systems.
Roll and pour application of bitumen felts.
Bonding of SBS modified membranes by hot mop method.
Sealing of laps and joints of various bituminous felts and membranes.
Wet area waterproofing.
Bonding of wooden boardsâ?? insulation panels.
Road resurfacing and repair.


Application
Heat the drum until the oxidized bitumen starts melting at approximately
130Deg.C. Apply by roller. Squeegee or direct rolling to an average rate
of 1Kg/sq.m.
For hot mop application. The membrane should be applied while
pouring to avoid re-cooling.


Packing
In steel drum(180KGS)
In SEALEDBAGS(25KGS/40KGS)

Description
OP-908 is solvent-based bituminous asphalt for cold application based on oxidized
bitumen, inert fillers and additives.

Application
OP-908 is conceived for cold bonding of polymer bitumen membranes with finish of
the lower face with sand or with mineral. It is also can be the bonding of waterproofing
membranes to the vertical connections,exhaust outlets, skylights and aerators.

Features
* With excellent adhesion, non-sagging and construction resistance.
* Without cracking and bulging after curing.
* Specific design for spray plastering.
* Applying by spraying machines efficiently.
* Suitable for tiling.
* Interior wall, exterior wall, panel wall and small area ceiling rendering.

Application
1. Substrate must be free from grease, mould oil, rust, rusty metal , wood peels, paints,
plastics, loose particles, contamination on any traces of foreign materials affecting the
adhesion of CS-010.
2. Moisten the substrate overnight and also at the time before the commencement of
operation.
3. Suggest to use CC-400 Concrete Bond as primer to adding adhesion for smooth
and low porous substrates.
4. CS-010 is suitable for any type of spraying machine. Mix a packet of 40KG powder
with 6.4liter of water and stir well for use. Its thickness should be maintained at
15mm and wait for 6-24 hours to apply for increasing the thickness.

Storage
Storage life is 12 months if the product is kept in a dry place.

Package
40kg/powder bag

CA-107W is a water-based dispersion of SBR polymer, especially used to improve the physical properties of cement.
It is formulated to increase the adhesion, durability and compressive strength of normal mortar.
1.Bonding of fresh mortar to old concrete.
2.Increase adhesion of vertical marbles,tiles.
3.Improve water-resistance when added to tile grouts.
4.Reduce shrinkage cracks.
5.Improve workability and abrasion resistance of screed.
6.Can be mixed with dry-packed,factory-blend mortar.

Description
CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements.

Use & Feature
1. Suitable for interior and exterior decorative applications.
2. An economical alternative to textured elastomeric coatings.
3. High water-resistance with handy-usability.
4. The built-in texture helps to disguise rough and irregular surfaces.
5. Can be used as primer with water-diluted CC-020.

Tool
Spray guns, trowels, spatulas, pattern-rollers

Description
CC-610N is a 2k topcoat which cured by non-yellowing isocyanate.

Feature
â?¦ Solvent-free, friendly to human.
â?¦ Compression and impact resistant.
â?¦ Chemical resistant as its special structure.
â?¦ Suitable for critical area (0~80â??).
â?¦ Suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc

Usage
Used as a topcoat on surface of concrete and
metal, bridges and steel structures.

Package
5 gal per set

CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage .

* Durable hard and tough film.
* Excellent adhesion.
* Excellent abrasion and corrosion resistance.

* used in multi-kind materials, such as metal, wood, cement and asphalt.
* Indoor, outdoor paint.
* Line Marking.

Description
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage .

Application
* used in multi-kind materials, such as metal, wood, cement and asphalt.
* Indoor, outdoor paint.
* Line Marking.

Characteristics
Durable hard and tough film.
Excellent adhesion.
Excellent abrasion and corrosion resistance.

Package 25KG / Iron durm

Color : white / yellow / red / green

Cover ability : 8 ~ 10 m�²

Description
CP-358W2K is a product which can be painted on rusty iron sheet, iron and other alloy products. Normally, iron products should get the rust removal by sand blast first when they get rusty. Then, they get painted with the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly get painted, the rust will spit out. But, the same situation will not happen if using CP-358W2K.

Features/Advantages
Quick and easy to use.
Fireproof coating.
â?? Hydrophilic.
â?? Water-based.
â?? Non-toxic & smokeless.
Environmentally friendly.
Can be applied well on steel construction body, steel bar, and steel sheet. Does not blister and get damaged when burning.
Rust removal is not required when applying CP-358W2K (unless the rust is thick).

Applications
Can be used in rocket missile or products that high-temperature application is required. Heating pipe.
Iron plate or sheet.
Indoor/outdoor fireproof paint.
Multiple iron materials/fireproof paint.
Plywood, veneer board.
Fire door surface treatment.

DESCRIPTION
a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling.
After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications.

USES IN APPLICATIONS
1. Cement Based Wall Plaster.
2. Concrete Wall, Column & Ceiling
3. Precast Concrete & Concrete profile
4. Internal & External.

ADVANTAGE
* Light, good workability and sanding properties.
* No cracks and hair cracks. (depends on background)
* Smooth surface, solid and no powdery.
* Can be painted or finished with wallpaper directly after dry in minimum 24 hours
* without using PVA putty to leveling up & filling uneven rough surface.

PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler : Limestone
3. Color : GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage : 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness
average 7.5m2/25Kg for 2-3mm thickness
6. Thickness : 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life : approx. 60 minutes
SURFACE PREPARATION
* The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
* Porous and absorbent substrates must be pre-wetted prior to application of Starcoat
CN finish coat.

DESCRIPTION
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains
selected filler and additive used for smooth finishing to uneven wall cement based plaster
and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,
smooth, no dust on the surface and ready to be painted with water based paint.
Easy to use, good workability and have a long pot life and correction time even at the
outdoor applications.

USES IN APPLICATIONS
*Cement Based Wall Plaster.
*Precast Concrete.
*Concrete Profile & Concrete Ceilings
*Internal & External.

ADVANTAGE
*Light, good workability and sanding properties.
*No cracks and hair cracks. (depends on background)
*Smooth surface, solid and no powdery.
*Can be painted or finished with wallpaper directly after dry in minimum 24 hours without
using PVA putty to leveling up & filling uneven rough surface.

PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler: Limestone
3. Color: GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage: 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness
6. Thickness: 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life: approx. 60 minutes

SURFACE PREPARATION
1. The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.

CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars.

FEATURES AND BENEFITS
100% solids epoxy
Solvent free
Low VOC
High tensile and compressive strength
Bonds to damp concrete
High mechanical strength
Excellent adhesion to most substrates
Cures at temperature down to 5Ã??C
High chemical resistance
Unfilled system
Allows for mortars and grouts to be mixed to any desirable consistency
Typically 3-4 times stronger than typical concrete
Complies with AS4020 potable water
Australian Made
Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).

DESCRIPTION
AS-600 is a high-solid, solvent-based polyurea coating. Itâ??s also formulated with pure aliphatic resin and contains UV filters, remaining unaffected by the sunlight and adverse weather conditions. It cures fast providing quick tack free time (1-2 hours), allowing most projects to be completed within one day.

CHARATERISTIC
* Fast drying and fast curing
* Brushable
* Abrasion and mechanical stress resistant
* Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etc)

APPLICATION AREAS
* Warehouse ramps, garages, terraces, parking areas
* Outdoor and indoor stores, industrial shop floors
* Outdoor laundries, gas station, etc..

Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.

Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius

Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces

Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded

DESCRIPTION
Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed.

ADVANTAGES
* Easy and ready to use, by water addition only.
* Fast working
* Practical and high adhesive power
* Floor would be flat/ level in a second

APPLICATION
CA-010 is used as a floor screed material surface that canâ??t be exposed and should be
covered with floor material, such as: ceramic, granite, carpet, parquet and other
materials.

PREPARATIONS
The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease,
without laitance and loose particles.
Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water.

MIXING
Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water
based on the condition of stirring and keep stirring around 5 minutes until grouting well.

APPLICATIONS
Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the
stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to
escape. Suggest to blend the grout by auto-mixer for better application.

COVERAGE
25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid

Grouting Mortar.
ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.

DESCRIPTION
CC-200 is a indoor, high fluidity, rapid strength and leveling material.
It still has high bonding,low shrinkage, low water absorption, acid resistance,
alkyl resistance and chemical resistance. It special use for fast repairing, putty and leveling for epoxy coating.

APPLICATION
Floor fixing on parking garage, factory, and warehouse.
Leveling before epoxy coating.
Basic layer for non natural paint.
Bec ause of the early strength and low moisture content, CC 200 has widely application.
Contact out agent when you have doubt on CC 200.

ADVANTAGES
1. Curing and enhancing are fast and rapid below 25 mins.
High strength and low water
absorption/ content could be reached after curing.
2. Good acid and alkyl resistance.
3. Good wear resistance, high compressive strength, leveling and anti cracking.


PREPARE TO USE
1. Clean with vacuum to ensure the surface dustless.
2. Working site is free from dust, sand, oil, and loose.
a). Crack and Joint Treatment
b). File on the crack, open a width of 2 3 cm depth of 1 cm or more groove joints and
clean up dust and loose.
c). At the same time taking CC 200 mortar, filled in and up the crack and sizing 1 2 times
primer after 2 4 hours.
4. Shorter wor king hours to achieve saving time, fast leveling and convenience work.

Description
CC-105HD Duraflex is one component, eco-friendly, water-based topcoat membrane.

Feature
Resistant to exposed sunlight and chemicals.
When applied, it forms as seamless membrane without joints.
Product keeps its mechanical features over a temperature span of 40 to 90

Use Area
Roof terraces balconies and verandas.
Industrial floor coatings.
Stones, marble and ceramic surfaces Coverage.
Consumption of each layer: 0.1.5-0.2.5 kg/m2.
Minimum two coats should be applied.
Total consumption: approx. 0.3-0.5 kg/m2.
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded.

DESCRIPTION
CS-106 Winshield is a specially formulated copolymer protective coating used in place of
windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting
concrete, to ensure a clean release and protective purpose.

FEATURES
Do not corrode glass, plastic or equipment
Minimize subjects cleaning
Cost effective
Apply on plywood, timber, steel, glass and plastic faced
Non-staining, Non toxic, non hazardous
Water-based and environmentally compatible

CP-201 is a three-component material. With organic and inorganic complex, it can provide a solid, and thermal shock resistant floor. It is solvent free and is a â??Green Productâ??. The finish is easy to clean, water-resistant, abrasion- resistant and good impact- resistant. With binary complex bond, it can resist the growth of moulds.

Feature
solvent-free, friendly to human.
compression and impact resistant.
chemical resistant as its special structure.
suitable for critical area (0~80â??).
suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc

Application
A. Substrate preparation:
1.Ensure that the substrate is solid and remove dust, grease or other contaminants by
grinding or blasting.
2.Enhance bonding with anchor grooves.

B. Application of CP-201
1. Prime the substrate with PU primer.
2. Mix A, B and C continuously until it becomes a smooth and lump-free paste. Apply the
mixture with special feeder to designed thickness and smooth the finish with steel
trowel or spatula for use.
Do not apply it without professional workers.

APPLICATIONS & CHARACTERISTICS
1. High bonding strength and easy to brush.
2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc.
3. Water based, green product.

PHYSICAL PROPERTIES :
1. AppearanceBeige liquid
2. Main ComponentWater-based neoprene.
3. Solid Content 52± 2%
4. Viscosity 4500 5500 cps (25, LVT)
5. Shelf Life 6 months

Description
CS-264 is the latest innovative Contact adhesive using our home-grown technology.
This is the only Contact adhesives with 50% solid. It's cost effective with the highest active
ingredients. Less solvent less health hazard.
CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene.

Features
Faster sticking Contact Adhesive within 5 minute.
Strong grab on contact with higher green strength.
Paintable when dried.
Easy to extrude even at -15 C , most suitable for all season.
Very Low odour without toluene.

1.High solid content 50%
2.Has high transparency,low fluidity and slump
3.Can be extruded easily in winter(about-15°C)
4.Can stick Metal, Timber, Concrete and other building material
5.VOC free versions are also available, using VOC exempted solvent.

PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain
toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene .

Unique feature as it can adhere the styrofoam material
Strong grab on contact with higher green strength
Excellent water resistance as it immersed in water for 3 months without adhesion
failure.
Very Low odor without toluene and MEK

DESCRIPTION
CC-301(54) is 1 K aromatic moisture curing PU adhesives,
it can be used as a waterproof primer for cement.
CC-301(54) has excellent bonding strength, weather resistance,
hydrolysis resistance after fully curing. (about 3 days. )

TECHNICAL DATA
Appearance : light yellow transparent liquid
Component PU : pre-polymer
Viscosity : 700-900 cps
Solid Content : 100%
Shelf Time : 6 months



OPERATION
1. Put CC 301(54) onto the cement, then used a roller to coat on the cement.
2. After first coating has already tack free (about 1 hour), the second coating can be
applied immediately.
3. After fully curing ( a bout 8 24 hours), the top coating can be applied.

PE-265 is and acrylic pressure-sensitive adhesives.
It has high initial tack, and suitable to apply on PVC flooring tiles.
1. Wide-range decorative applications.
2. Domestic constructions.
3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.

Description
CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of
PVC tile. It is easy to use.

Application
CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.

Description
CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which
does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology.

Features
Paintable easily with wb coating
Easy to use
Smooth to tool with trowel
Non-sagging
Stronger adhesion
High solid by volume; 100% water resistant when cured.
Low odor
VOC free / Solvent free


Uses
Gypsum boardCalcium silicate board
Fiber cement board
Plywood / Timber
Concrete / Tile
It may be suitable to use on other substrates not mentioned above.

Application
1. The surface to be adhered must be free of dust, release agent, oil and grease
2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as
indicated by uniform color.
3. Do not stir or mix the two parts on the application surface.

Description
Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types.

Features
â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation.
â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder.
â?? Non-toxic, tasteless, easy to clean.
â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion.

Application
1. Wallpaper adhesive.
2. Poster. Stamp adhesive.

Precautions
1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material
2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days
3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid.
It cannot be used and needs to be re-modulated


Package
5kg/barrel (20L barrel. Plastic bag inside)
35kg/barrel (big blue barrel, lined with plastic bag)

DESCRIPTION
CA-055 is an emulsion primer of water-based acrylic resin with excellent properties such as
water resistance, pull-off strength and pore-filling ability etc. , especially used to
improve the physical properties of cement. It can be mixed with water at any ratio.

FEATURES
Excellent penetration into the concrete substrate to increase pore-filling ability and
adhesion.
Reduced transport paths of concrete structure to enhance durability.
Excellent water resistance.

AREA OF APPLICATIONS
Repair mortar for concrete areas.
Industrial flooring.
Bonding agent for new to old concrete.
As cement grout additive.
As water-based primer.
For making two component tile adhesives.
As adhesion aid for skim coat materials.

PACKAGING
5 gallon Plastic Pails

FLAMMABILITY
Being water-base, it is non-flammable.

DESCRIPTION
ITLS PMS 60 is a single component elastomeric sealant without isocyanates.
It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials.

APPLICATION
ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications.
ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand.

INSTRUCTIONS FOR USE
SUBSTRATE PREPARATION:
The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand.
They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates.
It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.

CAULKING:
ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing.

CLEANING:
Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary.

STORAGE AND SHELF LIFE
12 months in the original, hermetically sealed packagings between 5 and 25 C

PACKAGING
290 mL cartridges and 600 ml sausages

SAFETY
Not classified as hazardous. Read the material safety data sheet before use.

Description
CP-121W(14) is suitable for new and old concrete floor with resistance and waterproofing ability. It has ability to penetrate in concrete, plaster or the surface of the stone for the building and to reach waterproofing.
* Able to apply on the damp surface
* Odourless and eco-friendly
* Excellent resistance ability of negative water pressure (Comply with CNS1232.
CNS10460. ASTM E96-12 B)
* Enhance adhesion strength

Properties
* Leaking stoppage from basement inner wall
* Waterproofing on negative water pressure
* Anti-seepage for underpass, tunnel and water tank

Application
1. Clean the surface to be free from loose particle, dirt and oil.
2. 3 options for application

DESCRIPTION
CC-610S Modified Polyurethane weather-shield is a two component with great bonding
strength on materials that are hard to adhere.
CHARATERISTIC
More suitable coating on surface as soft plastic, PVC, ABS, PCâ?¦..etc.
Non-yellowish and excellent gloss and color retention after exposure in outdoor.
Resist from most chemical products
Coating oil or color changing for tiles, imitation rocks.
Glass-painting and painting for iron, zinc plate, and stainless steel
High weather resistance and high gloss corrosion prevention paint for cement,
stones, asbestos, bricks, wooden materials, and bamboo wood.

NOTES
Please mix and stir well before using
Please make sure the lid is closed tightly.
Please keep the surface free of dust, loose or paint before painting
The tools are washable by solvents after application.
Avoid direct sunlight or high temperature environment to ensure excellent product
quality.
Keep the storage environment well ventilated and stay away from flammable when
applying paints.
The actual volume application depends on the surface condition.

DESCRIPTION
CC-610 Modified Polyurethane weather shield is a two
component with great bonding strength on materials that are hard to adhere.

CHARATERISTIC
Dust proofing and possessing self cleaning capability
Excellent water and weather resistance
Firm coatings with good alkaline resistance
Fast setting rate and easy to apply

APPLICATION
Coating oil or color changing for tiles, imitation rocks.
Glass painting and painting for iron, zinc plate, and stainless steel
High weather resistance and high gloss corrosion prevention paint for cement, stones,
asbestos, bricks, wooden materials, and bamboo wood.


Color : Clear & standard colors
Viscosity : 75-110 KU
Solid content : 30%-55%
Coating time interval : 2 hours minimum
Weight mixed ratio : Clear/1 0 : 1
Colored/1 1 : 1
Packaging
Clear
14kg : 1.4kg (5 gallon per set)
Colored
20kg : 1.8kg (5 gallon per set)
Apply methods
Brush, spray, roller coating

IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability.
Use as a protective coating on porous, water-resorbing surface like ceramics, bricks,
tiles, timbers...etc.
To prevent powdering, weathering effect on concrete walls
Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile
surfaces.
Excellent weatherability and waterproofing properties, due to silane grafting
(or coupling).
High permeability because of the semi water soluble, small diameter of the particles.
Ideal to apply on non-organic, porous substrates due to the excellent water-tight
property.

Description
CC-100M is a waterproofing additive for concrete, mortar and cementitious grout.

Use
Beams, foundations, masonry laying, floor and wall cladding mortars, plasters, slabs, slope walls, buried structures (water tanks, reservoirs and pools), waterproofed, reinforced and reinforced concrete, etc.

Technical Data and Property
Ambient temp.: 25, 50±5% R.H.
Packaging : 20kg /pail
Appearance : Grayish white powder
Odor : Odorless
pH : 12 ~ 13
Relative Density : 1.9 ~ 2.1 g/cm3
Absolute Specific Mass : 2.2 ~ 2.7 g/cm3
Flammability : Non-flammable
Solid Solubility : insoluble
**Results have been obtained from tests performed under standard conditions and may vary depending on application conditions.

DESCRIPTION
Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals.
Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only).
FEATURES
*Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling.
* Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons.
* Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property.
* Flexible but tough for use around home and in construction
* Easy on hand to extrude and apply due to its unique consistency.
*Easy to spread our adhesive evenly and thinly due to its soft buttery consistency.
* Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products.
* Printable when dried.
* Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.

Introduction
Bentonite Mat are consisting of three different layers supported by geotextiles and/or geomembranes, mechanically held together by needling, stitching, or chemical adhesives. A Bentonite Mat construction would consist of two layers of Bentonite Mat stitched together enclosing a layer of natural or processed sodium bentonite. The engineering function of a Bentonite Mat is containment as a hydraulic barrier to water, leachate or other liquids and sometimes gases.


Typical Applications Includes
Ponds and stormwater impoundments: Bentonite Mat are widely implied in sewage reservoir, storage ponds, and regular reservoir. The Bentonite Mat does not require specialized machine nor skilled workers, which makes it a great material for ecological pool protection.
Landfill liner : Bentonite Mat can replace the clay layer of geosynthetic membrane compound system, offering less systematic leakage rate. For a better result,combining with geosynthetic membrane is recommended. By doing so, when the geomembrane is compromised, the Bentonite Mat can still work for its purpose.
Anti-leakage of gas or oil depot:Due to the ease of application and great toughness, it is the most economic and reliable choice of leakage protection for oil or gas depot.
Landfill cap: Using the Bentonite Mat are widely adopted in different countries, for the damage and crack effect of uneven subsidence, desiccations, and dampness are drastically less than ordinary clay layer. Hence, the Bentonite Mat are extraordinary suitable for landfill cap.
Underground project waterproofing: The protruding thin fibers of Bentonite Mat surface can lodge in concrete and served as an anchor. When the subsidence occurs, the small anchors would prevent the Bentonite Mat and structure from forming a water intrusion interface.

Description
HY-330 contains specific high content of polymer resin, and can use with difference size of quartz sand to lay out sand texture.
It is non-toxic, eco-friendly, and can be applied on both interior and exterior wall, help enriching the monotonous surface.

Use
1.Interior and exterior wall decoration.
2.Enhance the finish surface by texturizing molding.
3.Other decoration usage.

Feature
1.Water-based, eco-friendly, and non-toxic.
2.Tough, durable, with good weather resistance.
3.Can prevent surface chalking of cement.

Series Product
HY-360/ Stone Plate Texture Coating

DESCRIPTION
CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout.

FEATURES
â?? High flow properties
â?? Bonds to damp substrates
â?? Rapid hardening and strength gain
â?? High chemical resistance
â?? Pre-measured kits make for ease of use
â?? High tensile and compressive strength
â?? 100% solid epoxy
â?? Excellent adhesion to most substrates
â?? Cures at temperatures down to 5oC
â?? Negligible shrinkage
â?? High mechanical strength
â?? Solvent free High early strength

PACKAGING
CC-404 is available in 3 litre and 15 litre kits

Feature: Reinforcement of Waterproof
High heat insulation
Good quality and dust resistance
Water resistance and high weather durable.
Drying faster and easy application.

Application
Cement wall
Galvanized steel
Color pre-painted steel
Plywood
Plastic wave-board
Lime-wall
The coverage will be affected by substrate
dimension and application method.
The loss factor as follow -
Brush= Theory coverage X1.4
Spray= Theory coverage X1.7

Description
1. Tough film and good adhesion on the concrete, able to penetrate into concrete.
2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties.
3. Good resistance to impact and abrasion.
4. Easy application , drying fast.

Prepare to use
1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity.
2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application.
3. Two packs product, must be used completely during the duration of its pot life.
4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??.
5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion.
6. Keep away from heat, sparks and flame.
7. Stored with good ventilation.
8. Keep adequate ventilation during application.
9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying.
**The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel.

Color : Clear
Drying time :
Tack-free : 2 hours
Hardness : 8 hours
Full cure : 7 days (grease)

DESCRIPTION
CC-600SP is a two component, solvent-free epoxy system with high chemical
resistance and high bond strength. The epoxy may be applied as a primer for most
high end industrial coatings, like Epoxies, PU.

CHARATERISTIC

Easy apply

Low odor

High bond strength

Abrasion resistant

Chemical resistant

APPLICATION

Concrete coating

Cement

DESCRIPTION
Bituminous Primer is product containing oxidized bitumen and a mix of technical quick
drying solvents.

APPLICATION
Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness.

INSTRUCTIONS FOR USE
Concrete surfaces must be dry, clean and free from oil, dust or release agents.
This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment.
Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces.

PACKING
5 gallon Bucket

SHELF LIFE
The product can be stocked in closed buckets and in dry area, far from UV rays for
12 months.

TOOL CLEANING
After use clean tools with common solvents.

CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material.
AREA OF APPLICATIONS
Repair mortar for concrete areas
Industrial flooring
Bonding agent for new to old concrete
Enhance adhesion strength of mortar

CS-613W is 2-component water-based premium epoxy product.
CS-613W as admixtures can improve the properties,
particularly in relation to water absorption reduction, toughness
enhancement, vibration damping and increase of the bond strength
of cement to reinforcements other than being used as admixtures,
CS-613W is used partial replacement of fine aggregate, for
coating, sealing and repairing concrete and for coating steel
reinforcing bars for corrosion protection.

AREA OF APPLICATIONS
Repair mortar for concrete areas.
Industrial flooring.
Bonding agent for new to old concrete.
As water based primer.
Can be applied with damp surface.

FEATURE
Weatherproof and waterproof of capabilities that help prevent the deterioration of the
ground-coat material.
Low odor.
Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.

DESCRIPTION
CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener.

APPLICATION
1. To prime the surface and help the following application procedure to mold and decorative coating.
2. Highly resist to chemicals in non-circulated places.
3. With well adhesion ability with epoxy system or PU system application.
4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium.

CHARATERISTIC
1. Able to be diluted by water.
2. Anti- efflorescence , suitable for the environment with highly hygienic request.
3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.

DEACRIPTION
Rockflex-BRH is a specially modified styrene butadiene rubber emulsion with widely applicable for use in repair and general purpose mortars and overlay applications. Also, it is likely to be applicable to floors, bridge deck, surfacing and compounds for repairs, road of concrete structures.

CHARATERISTICS
* Increase the performance of bonding agent for old and new concrete.
* Improving tensile and flexural properties of repair mortar.
* Reduces water penetration and shrinkage.
* Repair damaged, sprawled concrete and filling of cracks.
* Better abrasion resistance and chemical resistance of cement screeds.
* Suitable for waterproofing and laying floor screeds.
* Strength to adhere concrete, masonry surfaces.

APPLICATION PROCEDURE
* Substrate should be cleaned and free of dust. Use wire brush to remove loose material.
* Clean surface with water to remove loose particles and dust before primer application.

PRIMER COAT
Apply directly or mix cement and Rockflex-BRH in the ratio of 2:1.
Apply as a slurry coat before placing polymer modified primer application.

Description
CP-201 is a three-component material. With organic and inorganic complex, it can provide a solid, and thermal shock resistant floor. It is solvent free and is a â??Green Productâ??. The finish is easy to clean, water-resistant, abrasion- resistant and good impact- resistant. With binary complex bond, it can resist the growth of moulds.

Feature
solvent-free, friendly to human.
compression and impact resistant.
chemical resistant as its special structure.
suitable for critical area (0~80).
suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc

DESCRIPTION
AFTEK PU 25 is a one component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a tough and flexible seal joint with excellent movement performance. AFTEK PU25 performs excellent adhesion on most building materials with proven weather resistance against UV, Ozone etc.

APPLICATIONS
Precast façade unit sealing
Light weight cladding panel
Construction expansion joint
Window, door flame perimeter joint
Natural stone joint sealing
Ceramic joint sealing
Various building material joint sealing, ie. fiber glass, rigid plastic, etc

FEATURES
One component, ready to use
High movement accommodation +/- 25%
Can be over paint
Non toxic, sag, staining
One component ready to use
Excellent weather resistance
Prime less for most substrates

Rock-Loc is the best and most advanced synthetic dust suppression product. Using
revolutionary technology, long-lasting Rock-Lock is engineered to meet the most demanding dust control situations. Scientifically formulated from the most environmentally sustainable feed stocks, this non-hazardous, road moisturizing emollient is crystal clear, completely odorless and easy to apply. Perfect for hard wearing areas such as cattle yards, stables, truck and loading yards.

Description
Self-adhesive membrane is high-strength PE based,combined with bitumen layers,
forming rigid copolymer waterproofing sheets with high endurance.

Use
1.Foundation and basement waterproofing
2.Flooring,roof deck waterproofing
3.Interior and exterior walls
4.Tunnels,reservoirs,sewage treatment tanks

Feature
1.Easy apply, no torch equipment required
2.Self-adhesive,fast and easy application
3.Can combine with the structure as a whole,
therefore prevent vapor transmission and expansion

Series Product
CP-107/Gravel,PE/Thickness : 2/3/4/5mm
CP-108/Sandstone/Thickness : 2/3/4/5mm
OP2100/PE/Thickness : 1.5mm
XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm
XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm

Flexible Multi-Purpose Hybrid Polymer Sealant
Description
AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time.
AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc.
and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.

MP is an easy to use 1 component oxime type silicone sealant which there is pungent smells less and little corrosion as a multi-purpose silicone sealant. It may be used for various construction parts including windows and glasses because of excellent weather-proofing, durability, adhesion, and construct ability.

Use
Window and frame joint sealing
Glass, mirror, and Al sash sealing
**Always test adhesion to substrate before starting project

Feature
1 Component Type Silicone Sealant
Neutral Curing Type
Excellent adhesion to various materials without any primer
Easy to use as one component and room temperature curing type
Easily squeezable for convenient work
Good weatherproofing and durability

Advantages
Good adhesion to various materials like PVC , metal panel , and glass
Excellent weatherproofing
Non Slump


Packing / Color
300g Plastic Cartridge Type Packing (transparent)
400g Plastic Cartridge Type Packing (other colors)
25 ctg / Box

One part, neutral, moisture cure, and high performance silicone sealant .
It can be used for expansion joints, metal panels, glass, natural stones, window frames,
etc. Excellent sealing forms elastomeric and waterproofing interface for most building substrates.


Features & Benefits
Enhance d building aesthetic performance prevents long term dirt (or residue)
run down on metal panels and coated glass or staining of porous substrates
Excellent adhesion to most building substrates, such as glass, metal, masonry
ceramic tile, natural stone granite and polymer coating materials.
Outstanding UV and weather resistance
Free of plasticizer and oil. Non pollutant s on building materials
Low modulus properties, excellent tensile strength and elongation It can be applied on the movement joints of highway, airport s, bridges, parking lots.


Approvals
Passes American standard specification ASTM C920.
Meets Taiwanese Public Construction Commission, Executive Yuan silicone.
specification : Chapter 07921.
Meets the related standard specifications: CNS8903, CNS8904 , BS EN ISO11600 ,
and JIS A 5758.

Packaging
DS-900 is supplied in 300 Ml Cartridges.

Description
CA-100FR is a low cost,gypsum-based, cementi-tious,spray-applied fireproofing product designed for and easy, fast application to steel and concrete substrates.
CA-100FR incorporates application benefits including Graces patented injection technology for fast set and improved hangability.

Use
1. High-rise and low-rise commercial office buildings.
2. Conventional buildings.
3. Hotels,resorts and casinos.
4. Health care facilities,sports centres.
5. Schools and museums.
6. Airport terminals.

Feature
1. High bond strength.
2. Quick set in 15 minutes.
3. Resists damage from air erosion and abrasion.
4. Gypsum-based formulation contains no mineral fibres.
5. No topcoat or surface sealer required.

DESCRIPTION
AS-650 is a flexible, two-components aromatic polyurethane protective coating. It can be used on various substrates for coating and protecting purpose, especially with the excellent adhesion ability with polyurea and polyurethane layers. It cures fast providing quick tack free time (1-2hours), allowing most projects to be completed within one day.

CHARATERISTIC

Fast drying and fast curing

Brushable

Solvent free

Abrasion and mechanical stress resistant

Chemical resistant (in diluted acids-alkalis, car oils, petroleum, etcâ?¦)

APPLICATION AREAS

Parking areas, warehouse ramps, garages, terraces

Outdoor and indoor stores, industrial shop floors

Outdoor laundries, gas station, etc

2K PU Waterproofing membrane

Description
The product is good for weather resistant, adhesive and yellowing resistant. It mainly use for courts top coat and drawing. Well adhesion to RC, metal, and wood.

Features
1. Good adhesive.
2. Well weather resistant.
3. Well wear-resistant and water-resistant.
4. Its a kind of a protective paint. Use for protecting metal, wood from rust.
5. Coat for drawing.


Coating Methods
Use brush, spray or wheel to daub in uniformity by twice.

Professional Caulking Gun 15
*600ml
*For 600ml capacity
*Aluminum tubular sealant holder
*Black aluminum casting trigger & handle , swivel
*With attachments for sachet (sausage) pack
silicone
1 pc tube nozzle(250TN)
1 pc push disc (250 PD2)
*Each in PE bag
*10 psc /ctn/10.8kgs/1.39cft

DESCRIPTION
CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid.
It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties.

FEATURE
Components easily mixed, fast curing
Its low modulus gives it excellent substrate crack-bridging properties
Excellent adhesion on almost any surface
Excellent thermal resistance, max service temperature 80
Resistance in the cold: Film remains elastic even down to -40
Good chemical resistance
Can also be used as a joint sealant

APPLICATIONS
Bathrooms, balconies, basements and rooftop
Gypsum and cement boards
Light roofing made of metal or fibrous cement
Non-potable water tanks
Bridge platforms
Cut-and-cover tunnels
Irrigation channels

PACKAGING
A : 20LT
B : 20LT

Description
HYPERCOAT-568 is a single-component,high-strength water-based waterproof coating
composed of modified copolymer, which has both waterproof and thermal insulation effects, and has good water resistance and weather resistance.

Use
â?¢ Bathroom, Balcony, Terrace
â?¢ Roof (flat/sloping)
â?¢ Floor seams, parapet
â?¢ Suitable for old and new waterproof engineering made of acrylic or PU material.


Feature
â?¢ Can be used immediately after opening the bucket,easy to use, suitable for DIY users.
â?¢ Good adhesion to cement.
â?¢ Can be directly tiled or exposed directly after drying.
â?¢ Good water and UV resistance, forming excellent weatherability.
â?¢ After completely curing, the water-proof layer of the roof is walkable.
â?¢ Can effectively block heat transmission.
â?¢ Waterproof repair for new and old metal iron roofs.

DESCRIPTION
CA-055(W12) is an emulsion primer of water-based acrylic resin with excellent properties such as water resistance, pull-off strength and pore-filling ability etc. , especially used to improve the physical properties of cement. It can be mixed with water at any ratio.

FEATURES
*Excellent penetration into the concrete substrate to increase pore-filling ability and adhesion.
*Reduced transport paths of concrete structure to enhance durability.
*Excellent water resistance.

AREA OF APPLICATIONS
*Repair mortar for concrete areas.
*Industrial flooring.
*Bonding agent for new to old concrete.
*As cement grout additive.
*As water-based primer.
*For making two component tile adhesives.
*As adhesion aid for skim coat materials.

PACKAGING
20kg Plastic Pails

FLAMMABILITY
Being water-base, it is non-flammable.

CLEAN UP
Tools and equipment can be easily cleaned up with cloth before drying.

DESCRIPTION
CA-002W(12) is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. After mixing grout with CA-002W(12) can increase water resistance and bonding strength.

AREA OF APPLICATIONS
* Repair Mortar for Concrete Areas
* Industrial Flooring
* Bonding Agent for New to Old Concrete
* As Cement Grout Additive
* Enhance adhesion strength of Mortar.

PACKING & STORAGE
20kg per plastic pail.
Please store in cool places and avoid direct sunlight.

DESCRIPTION
CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage.

ADVANTAGES
* Prevent the constructions aging phenomenon
* Avoid the leakage and mold on the wall
* Effective against negative water pressure
* With good stability
* Non-Toxic

APPLICATION
* Internal and external walls
* The leakage of inner wall in basements or the protection against negative water
pressure
* The construction of base isolated structures
* Reservoir; drinking water pool
* Contaminated water pool; water storage tank

PROCEDURE
1. Ensure all surfaces which CC-103(1K) will be applied are clear.
2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer.
3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply
evenly with a nap roller.
4. Use finishing trowel to smoothing after using spray machine.

PACKING
22.5KG per pail.

STORAGE
6 months in original container stored in dry conditions.

LIMITATION
The crystalline products need to be used between 4 °C ~ 32 °C when applied.

DESCRIPTION
CP-310 was synthesized from imported high-technology macromolecule resin and
specialized paint that is different from general acrylic resin. CP-310 is a perfect product to
provide a high water-tolerant, climate-tolerant, and anti-UV ability.

FEATURES
* Excellent environmental water-based waterproofing paint
* Water-based, Non-toxic, odorless, inflammable, and harmless
* Fine adhesion, extreme toughness, high elastic, and high endurance
* Hydrophilic, and may be applied on damp surface

USE
RoofBuilding, condominium, factory, barracks, school, garden and etc..
WallsBasement wall , exterior wall , and etcâ?¦
PREPARATION
1. (The following steps are recommended for best results)
2. New concrete must cure for a minimum of 30 days
3. All holes or cracks must be properly patched
4. All surfaces must be clean and free of dirt, dust, efflorescence and oil

APPLICATION
(The following steps are recommended for best results)
1. Stir well before use. Do not thin; however, if thinning is necessary, thin water at a
rate of no more than 10%
2. One prime required CP-310 primer
3. Two coats are required for the best resultskeep the thickness of each coating
below 1m.
4. Wait for each coating to be total dry before overlaying the next coat. The interval
time between each coating is minimum of 8 hours.

COVERAGE
5-gallons about 33m2

COLOR
Grayã??Whiteã??ivoryã??Green

DRY TIME
Dries to touch in about 1-2days . Low temperatures or high humidity conditions will affect
drying time. Full cure should be reached in 14-30 days.

CLEAN UP
1. Clean hands and tools with soap water.
2. After 30 days or paint has fully cured, areas may be wasted using a non-abrasive, mild
detergent and cellulose sponge.

WARNING
(Read the following carefully for your own safety)
1. Keep out of reach of children-Do not take internally.
2. May cause eye, skin and respiratory tract irritation. May be harmful if swallowed. Use
only with adequate ventilation.

DESCRIPTION
CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete.

ADVANTAGES
* Applied to wet surface
* Transparent, non-toxic and odorless
* High cohesion and effective against positive/negative water pressure well

APPLICATION
* The leakage of inner wall in basements or the protection against positive/negative water
pressure
* Prevent seepage and leakage in underground passages and tunnels
* Avoid the leakage of cisterns and pools

PACKING
30KG/Set
A: 22.5KG in powder.+ B: 7.5KG additive.

COLOR
Grey and white.

STORAGE
6 months in original container stored in dry conditions and under 25°C.

Description
PU-850 is a one component, thixotropic, polyurethane waterproofing membrane where viscosity of the liquid is paramount. In applications such as sloped roofing,
flashing details and under tile waterproofing PU 850 cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. PU 850 is
fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it thixotropic, hydrophobic and elastomeric nature, PU 850 is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running.


Use
- Shower Recesses - Bathrooms
- Laundries - Kitchens
- Balconies - Retaining Walls
- Planter boxes - Steel (suitably primed)
- Patios - Plasterboard
- Courtyard Areas - Brick
- Concrete, Cement render, plaster
- Wet area wall lining board
- Hardie/CSR sheet flooring
- Light weight aggregate block


Feature
â?¢ Easily applied onto vertical and sloped surfaces with no running OR bubbling.
â?¢ Excellent adhesion to most substrates.
â?¢ No thinning required.
â?¢ Excellent thermal resistance, never turning soft.
â?¢ Excellent cold resistance, remaining elastic to -40â?°c
â?¢ No accumulation of humidity under coating
â?¢ Excellent mechanical properties
â?¢ Highly stable, will not bleed through porous materials
â?¢ Bitumen free
â?¢ Highly elastic and stable.

Packaging
15 Litre pail

Consumption
1.2~1.5kg/m�²

Shelf Life
Unopened pails can be stored for up to 12 months in
a cool, dry and weatherproof environment.

CC-402 is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C. CC-402 complies with the requirements of EN 1504-2 as protective coating.

CC-402 is used for protection and enhancement of concrete structures (normal and lightweight concrete),especially exposed outdoor concrete surfaces with a risk of cracking CC-402 is used with concrete repair works as an elastic protective coating on AFTEK smoothing mortar (refer to product / system data sheet), fiber cement and over coating of existing soundly adhering coatings.

Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)
Crack-bridging even at low temperatures (-5°C)
High diffusion resistance against CO2 reducing the rate of carbonation
Water vapour permeable
Very good resistance against weathering and ageing
Environmentally friendly (solvent free) .Reduced tendency to dirt pick up and
contamination.

DESCRIPTION
HYPERCOAT-688 is the range of high performance, seamless, cold-applied liquid waterproofing
membrane.
CHARATERISTIC
1. Quick and easy to apply. Single pack, liquid applied waterproofing membrane.
2. Excellent hydrolysis resistance
3. Still can curing when apply on the moisture surface without observed water.
4. The middle layer of the tile, the top coating or each cement-based finished surface.
APPLICATION
1. Indoor: Bathroom, kitchen & terrace
2. Outdoor : Roof, floor joint, parapet and wall.

*Works on wet,dry,dirty or corroded pipe
*Works under salt or fresh water
*Works on any metal or plastic pipe
*Cures in 10~15 minutes
*No tools needed
*Impervious to water,oils,chemicals,solvents&acids

DESCRIPTION
Doctor-sil 792 is a high performance, weatherable product and suitable for various
interior/exterior joint sealing, glazing, and curtain-wall. It is designed to have 50% movement capability, superior durability, weather ability and adhesion. Especially, it is a low modulus product which can efficiently cope with shrinkage/swelling on joint having superior elongation ratio.

FEATURES AND ADVANTAGES
* Low modulus product specially designed for new building joint.
* Superior bonding strength on various substrates without primer.
* Easy application with one component.
* Easy installation with good extrusive property.
* Superior weather ability and durability.

APPLICATIONS
* Window & Window Frame Joint Sealing
* Interior/Exterior Joint Sealing
* Aluminum Frame Assembling
* Curtain Wall Joint Sealing

DESCRIPTION
Gap Filler is a multi-purpose and high quality sealant. It is composed of environmentally friendly water-base polymer emulsion and inorganic filler. It is smooth, flexible and easy to use after curing prevents cracking.

APPLICATION
* It forms an airtight seal to prevent air and moisture when applied to surfaces such as
wood, brick, masonry, drywall, concrete, ceramic tile and glass.
* It is ideal for sealing seams, joints and cracks around windows, door, siding, woodwork
and air conditioners.
* Please do not use for adhesion or sealing of glass or structures unit.

DESCRIPTION
Doctor-Sil829 is single component type acetoxy silicone sealant. As it excels in
weatherproofing, durability, adhesion, and constructability, it may be used for various
construction parts including windows and glasses.
* Good weatherproofing and durability.
* Maintains good flexibility
* Excellent adhesion to concrete most metals and plastics

APPLICATION
* Metal, aluminium, glass, wood, resin, ceramic and fiber

Polyurethane Multi-Purpose Construction Joint Sealant

DESCRIPTION
ITLS PU 50 is a single component polyurethane based elastomeric sealant which cures
under the effect of atmospheric humidity to form a flexible and resistant joint with very
good adhesion on most materials.

APPLICATION
ITLS PU 50 can be used for bonding and caulking different materials used in the general
industry : concrete, wood, aluminium, most lacquered metals, polyester, glass, stone, etc.

DESCRIPTION
Cement Filler is used for exterior coating on the tiles, steel plate, a smooth surface or a
low porosity material to combine the old surface and the new one.

FEATURE
* Water-based formulations of two special adhesive.
* For tiles, steel, a smooth surface or a low porosity of the material surface ?¯ etc.
* With waterproofing, impervious, weather resistance, freeze-thaw characteristics.
* Can be used both on wet and dry surfaces.
* With good adhesion.

APPLICATION
* To adhere and mix old concrete surface and new concrete surface
* Can be used to adhere indoor and outdoor old cement walls, fiber cement board,
tile, concrete, colored steel board, asbestos and various green compartment
plates etc.

WORKING PROCEDURE
1 All surfaces need to be clean, free from dust, rust, white birch and either grease.
In addition, the concrete could be moistened but not with floating.
2. Coating CA-003M by brush, roller or spray on the substrates. The coverage would
be 4 ~ 7m ² per kilograms which depends on the situation of porous and roughness of
the substrates.
3 All the tools can be cleaned by water.

DESCRIPTION
CC-601SP is a two component, Epoxy system with High Chemical Resistance and
High Bond Strength. The epoxy may be applied as a primer for most High End
Industrial coatings, like Epoxies, PU.

CHARATERISTIC
* Easy apply
* Low odor
* High bond strength
* Abrasion resistant
* Chemical resistant

APPLICATION
* Concrete coating
* Cement

DESCRIPTION
CC-604 is two components of water based surface paint, composed from water based of
liquid epoxy resin and hardener and special pigment.

APPLICATION
1. Waterproof of concrete wall, resist to mold and decorative coating.
2. Highly resist to chemicals in non-circulated places.
3. Suitable for hospital, operation room, food factory to prevent the mold, dust and
bacterium.

CHARATERISTIC
1. It is water based paint, and dilute by water, but its films strong after hard is not less
than solvent based epoxy resin.
2. With good light resist quality, uneasy to become powder or change color, suitable for
the environment with highly hygienic request.
3. Good to resist the radiation, can be used for the concrete wall and floor in the nuclear
power factory.
4. Good adhesion to the moisture floor, can take as the primer for non-solvent or solvent
based epoxy resin.

Description
CA-003W Waterproof Agent is a high-grade liquid additive that gives the dual benefits of
providing significant improvement in workability along with reduced water absorption. The addition of CA-003W to a mortar mixture enhances the plasticity of the mixture by creating a â??ball-bearingâ?? effect. At the same time, the microscopic capillaries are rendered
discontinuous, thereby impeding the flow of liquid through them, and finally reducing the
permeability of the mortar. CA-003W contains special polymers that reduce formation of shrinkage cracks. The improved cohesion provides lower rebound loss supplemented by a greater coverage. The increase in coverage can be up to 20 %. This makes significant cement savings possible. The spreading and smoothening is also made much easier.
The efficiency of labor is increased, and plastering can be done in a single operation.
CA-003W provides the mortar with efficient,reliable and durable damp proofing against acute rains, ground water moisture as well as environmental humidity.
Thus the use of CA-003W provides significant benefits, while keeping plastering economical.

DESTRIPTION
HYPERCOAT 570 is a pre mixed, pre coloured water based, slip-resistant UV stable
coating with excellent performance against wear and weathering, therefore providing a
rejuvenated fresh and safe surface coating that is suitable for internal and external use.
HYPERCOAT 570 has excellent hot tyre resistance and forms a hardwearing finish.
HYPERCOAT 570 is recommended for both commercial and residential use. Most common applications include tennis court repair, walkways, playgrounds and similar recreational areas around domestic, municipal, educational and commercial buildings. It is also suitable for stair treads, decks, balconies, ramps and is easily repaired or recoated after thorough cleaning.

DESCRIPTION
ITLS LD5 is a high performance liquid deadener for panel vibration damping and noise
control. The exceptional vibration damping properties are complimented by fast drying ,
ease of use, environmental friendliness and low flammability.
ITLS LD5 is a thixotropic paste and is specially designed for trowel, pour, brush, roll-on and air-gun spray applications. Once dry the cured film is UV resistant and water resistant.
ITLS LD5 is a light weight product. The dry film is light in weight without compromising the high performance. Consequently, this material is recommended for weight sensitive
applications eg. aircraft, marine and automotive applications.
ITLS LD5 effectively reduces resonant vibration. Vibration energy is absorbed within the
material and converted to heat. In addition to vibration damping, it also increases substrate transmission loss as a result of the reduction of panel coincidence and panel resonance effects.

DESCRIPTION
CA-001 is a high performance acrylic emulsion additive for cement and sand mixes for waterproofing purposes. It is soft, elastic and transparent after drying.

FEATURES
* High Solid Contents.
* Soft, elastic and transparent after drying and thereby reducing the incidence of crack
formation.
* Improve workability, water resistance and compressive strength for concrete.
* Mixes easily with cement and sand mixes.
* Suitable for interior and exterior uses.

APPLICATIONS
CA-001 can bond well to masonry, concrete, cement and sand backing, and various porous materials.

DESCRIPTION
CA-002 is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. It can be mixed with water at any ratio.

AREA OF APPLICATIONS
* Repair mortar for concrete areas
* Industrial flooring
* Bonding agent for new to old concrete
* As cement grout additive
* As water based primer
* For making two component tile adhesive
* As adhesion aid for skim coat materials

DESCRIPTION
CC-301 is 1-K aromatic moisture curing PU adhesive. It can be used as a waterproof primer for cement. CC-301 has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing about 3 days.

OPERATION
1. Put CC-301 onto the cement and then use a roller to coat on the cement.
2. When first coating has become tack-free (about 1 hour), the second coating can be
applied.
3. After fully curing (about 8-24 hours), the top coating can be applied.

DESCRIPTION
A Torch on waterproofing membrane for multi layer application; following project evaluation this membrane may be used as an intermediate layer in fairly large professional waterproofing application with top quality membrane on stable surfaces or in temporary applications such as retaining walls to provide protection against ascending moisture on under-flooring surfaces.
The COMPOUND used in ITLS CP-109 membranes contains distilled bitumen,
polypropylene polymers and stabilizing aggregates and is the result of many years of
research to obtain the best performance for specific roofing applications.
The use of REINFORCEMENT in reinforced glass mat or non woven polyester stabilized
with glass fibers gives ITLS CP-109 good dimensional stability and excellent mechanical
properties in this class of polyester membranes for standard applications.
Top FINISH in silica sand, non-woven polypropylene or self-protecting natural and colored
slate chips disseminated uniformly and firmly anchored; 3/4mm version with embossed
finish, all others are smooth. Both BOTTOM finish with torch off polyethylene sheets.
PRODUCT PLUSES ï¼? guaranteed by more than 10 years in the field; low cost high
performance; wide product range.

* TYPEï¼? Milky White VAE/Acrylic Copolymer Emulsion.
* APPLICATIONï¼? Roof
* CHARACTERï¼?
1. Environmental friendly water-based paints, safe and non-toxic.
2. Good workability because of high compatibility with cement and aggregate.
3. Excellent elongation and tensile strength to protect the cement surface.
4. High performance waterproofing application.
5. Fast setting/drying speed and enhanced water resistance.
6. Easy to paste tiles, paint or apply protect slurry layer.
* VISCOSITYï¼? 1000~3000 cPs (LVT 3/12 rpm, 25 â??)

DESCRIPTION
CP-581 is a high performance acrylic emulsion additive for cement and sand mixes for
waterproofing purposes. Be proud of its own softness, elasticity and easy to apply.

USAGE
Masonry, concrete, cement, balcony , and various porous materials.

APPLICATION
â?? Recommended Mixing Ratio is CP-581 : Aggregate = 1 : 1 ~ 2 ( By Weight )
â?? Primer: CA-002W or CA-107 SBR
â?? Coating: Any water-based coating.
If solvent-based paint is applied, please test before using.

DESCRIPTION
HYPERCOAT-518 is a premium, semi-thixotropic, liquid-applied, highly permanent elastic, cold applied and cold curing, one component synthetic rubber membrane used for long-lasting waterproofing. HYPERCOAT-518 is solvent based, cured by reaction with ground air moisture. And itâ??s semi-thixotropic for use in sloped surfaces.

APPLICATION
â?? Concrete Roof, balconies, terraces and verandas
â?? Wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc.
â?? Pedestrian and vehicular traffic decks
â?? Green roofs, flowerbeds, planter boxes
â?? For repair old bitumen felts, asphalt felts, EPDM and PVC membranes and old acrylic
coatings.
â?? Waterproofing and protection of concrete constructions like bridge-decks, tunnels,
stadium stands, car parks, etc.

Product properties
â?? Long lasting performance with acidity and alkaline
â?? Good resistant with oil, bitumen, wax
â?? Strong adhesion with metal and concrete substrate
â?? One component products, easy to apply and suitable for various tooling
â?? Elongation more than 700%, tensile strength more than 70kgf/cm2,
â?? Penetration strength more than 25kgf/cm2, tear strength more than 40kgf/cm

DESCRIPTION
CP-502 is Ethylene-Vinyl Acetate copolymer latex , it has film with flexibility.
It can be use to mix cement , extend prolife and reduce stiffness of cement.

APPLICATION
CP-502can be use to mix cement , extend prolife and reduce stiffness of cement, and it
has flexibility and waterproofing after cement solidification.
It is a elastomeric coating used to the surface of a cement wall, the latex can add to
more filler and change the viscosity unapparent.

THICKNESSï¼?About 1 mm when just sizing; about 0.8 mm after dry

COVERAGEï¼?About 2 Kg/m2 ï¼?Dry membrane reach to 2 mmï¼?apply 2~3 timesï¼?

SUGGESTIONï¼?
1. Tools: Brush/ Roller/ Spray Gun
2. Normal: Emulsion
AAggregate
B11
By Weight
3. Enhance elongation performance by increasing emulsion content 5~10%.
4. To get better tensile strength might reduce the usage of emulsion.
5. Dilute with water if apply by roller or spray gun. Add 10
6. Avoid cracking, shrinking or other paint failure by following

PRIMERï¼?CA-002 or CA-003 dilute 2~3 times for using
COATINGï¼?Water-base Paint. Test before using, if apply solvent-base paint.
DILUTE AGENTï¼?Waterï¼?5ï½?10% for rollerï¼?

PRECAUTION
CP-502 should be stored below 40â??,and be kept away from sunlight or fire.
Shelf life is one year.

DESCRIPTION
CC-102 Concrete Hardener is a clear high performance waterborne liquid which being
applied to the floor and absorbed into the concrete pores and reacts with the calcium salts effectively making the concrete surface denser and considerably less porous.

APPLICATIONS
Suitable for improving the quality of concrete floors in factories, warehouse and any other
area where hard non-dusting floors are important.

SURFACE PREPARATION
Surfaces should not have had previous treatments. They should be firm and free from oil,
dirt, dust etc. Weak spots should be cut out and filled with CEMCRETEâ??S FLOOR
PATCHING. All surfaces to be dry at time of application.

MIXING AND APPLICATION
Shake or roll drum to thoroughly mix contents. Apply HARDENER to the dry surface using a soft household broom or paint roller. Application should be liberal but it is advisable to brush away unabsorbed pools immediately to avoid the HARDENER forming glassy layers. Allow one day between coats. Two coats are usually sufficient, but a third might be required if the concrete is very porous

SPECIMEN FINISH
A trial area should be treated on site for the Engineerâ??s or Architectâ??s approval.

COVERAGE
Depends upon the suction and texture of the surface.
Approximately 6m2 / litre/coat.

ITLS-RB is a flexible high-performance sound barrier.
It is a low-stiffness material which improves the sound transmission loss by effectively
blocking noise.
ITLS-RB has a reinforced backing to further enhance its mechanical strength.
It is designed for hanging-up applications where the material is typical used as an
acoustic curtain.
ITLS-RB is a high temperatures resistant noise barrier.
It provides excellent soundproofing effect at a wide range of temperatures,
typically from -40°C to +140°C, where other traditional noise barriers would fail.
ITLS-RB meets with GM Holden specification HN2483 requirements.

Key Features
*Durable & flexible
*Suitable for hung-up applications
*Easily cut, fabricated and installed
*Contains no lead, non toxic
*May be stapled or nailed into position
*Suitable for elevated temperatures up to 140°C(Intermittent)

Key Benefits
*Proven soundproofing performance
*Economical
*Low installation cost
*Easy to handle

Product Features :
1.Strong adhesion and economical choice.
2.Quick setting and curing time.
3.Easy and quick use.
4.Suitable for dry fastening.
5.Suitable for wall and overhead application.
6.Reduced anchor spacing and edge distance.
7.Variety of cartridge sizes are available.
8.Partially used cartridges can re-used by replacing the mixer nozzle.

Base Material :
Concrete,solid masonry ,and hollow bricks masonry.

Application :
Fixing machines,handrails,steel constructions,and reinforcement bars.

Shelf Life :
12 months after the manufactured day if stored in perfect conditions.

Dual functions
Fast drying 2 in 1 -adhesive sealant

Faster and higher green strength than solvent based construction high strength formed after 5 hrs.

Water-based construction adhesive is developed to serve as adhesive and sealant give good wet grab. The adhesive is tough but also flexible. Developed for both professional and home handy man using AFTEK own new technology.
1. Fast setting
2. Very Tough but flexible with good degree elasticity
3. High heat resistance better than solvent based adhesive
4. Plasticizer resistant
5. No Sagging No sliding on smooth surface, can use on ceiling
6. No Drooling, no wastage and no mess on floor to clean up
7. High wet grab good for sticking heavy tiles and not slippery.
8. Easy to extrude even on cold day.

Features:
* Almost odorless.
* NO VOC safe to use indoor.
* Exceptional fast bond development.
* Creamy smooth easy to spread.
* Highly thixotropic easy to use on wall and ceiling without dropping off.
* Good gap filling properties-suitable for filling uneven surface or small crack due to high
solid content.
* Paintable when dry.

Product Specification:
Highest Solid by weightâ?? 82% -83% few if any can match it.
* SG â?? 1.65 â?? low filler surface area more binder for better adhesion.
* pH 6 â??7 â??Near neutral safe on substrates.
* No caustic soda or ammonia safe to use at home.
* 5 hours bond strength 2.0 kg force/cm2
* After 24 hrs Bond strength 22 kg force/ cm2 no other WB adhesives can match that.

Clean Up
Clean up tool as soon as possible with water before it set hard. For harden adhesive, scrap off as much as possible with a strong scraper. Use solvent such as mineral turp to
soften the remaining adhesive.

Shelf life â?? I year if kept at ambient temperature within 5â?°C - 35â?°C.

DESCRIPTION
CC-700 is a 100% solid content, two components, high performance polyurea elastomer
based on aromatic MDI and amine-terminate Polyether. It displays extremely fast cure times about 10-100 seconds and shrinkage resistance which also provides excellent acid, alkali and chemical resistance.


WORKING PROCEDURE
1. Surface preparation - please make sure the surface in clean, dry,
sound and smooth condition.
2. Crack repair â?? Epoxy resin mortar, Epoxy resin repair material,
single component polyurethane sealant and single component
polyurethane waterproofing material.
3. Primer
4. Application â?? 2.1-2.5kg per 2mm thickness.
(1.3kg of CC-700 could be applied 1mm thick)
5. Top coat

CHARATERISTIC
1. Well abrasion resistance, flexibility and elasticity.
2. Corrosion resistance
3. No building restriction, wide working temperature range.
None sensitive to temperature and humidity, it can be harden
at 5â??. It can be applied in -40â?? ~ 120â??.
4. Environmental protection and high solid content.
5. Non-sagging and seamless, can be used over flat or vertical surface at the same time.
6. Excellent adhesion to a wide range of substrates.

DESCRIPTION
* Environmental friendly water-based paints,safe and non-toxic.
* Suitable for indoor/outdoor excel wall.
* High performance waterproofing application, excellent permeability,
and corrosion resisting.
* Resist to mold,weather and chemical resistance.
* Fast drying and no irritating smell, Expoy is substituted by CC105.
* Apply in multiple layers with smooth surfaces.


APPLICATIONS
* Floor or excel wall fixing on Parking Lot,Mall,and home used.
* Industrial factory and white room.
* Excellent permeability and enhanced water resistance,
Can be used in wet and fouling protection areas.
* Used as waterproofing coating and burnish surface coating.

PACKING AND STORAGES
* 20 kg/pail
* The amount of raw 0.1~0.15 kg/m2 (twice usage)
* keep the storage environment well ventilated area. Less than
25 degrees can be stored for 6 months.

PREPARATIONS
This product is waterproofing, heat insulated, breathable compound materials. It is made
from versatility graded sand, lightweight aggregate, water-proofing resin and variety of
additives.

FEATURES
* To retain waterproofing, heat insulated, breathable through one-time application.
* With excellent adhesion, non-sagging and construction resistance.
* Without cracking and bulging after curing.
* Applying by manual and mechanical efficiently.

APPLICATIONS
* With painting and leveling on the indoor, outdoor and bathroom wall.
* With painting and leveling on roofing insulation.
* With painting and leveling on metal mesh.
* To repair the surface of the roof ceiling.

CP-311 Hyperguard WPU is water-based polyurethane, waterproofing coating for roofs when mechanical durability and outstanding waterproofing properties are required. It forms a non-penetrating against moisture film with resistance to UV and mechanical stress. Ideal solution for waterproofing walkable roofs
High mechanical strength
Applicability and on cloudy days as the final polymerization of the material is done by evaporation, and therefore under shading
No appearance of holes in the surface during the curing of material
Protection of polyurethane foam insulation
Certified with CE
Eco-friendly (Water-based)
Easy to apply
Resistant to temperatures from -15 to 80

DESCRIPTION
Hydrostatic press stone filmless maintenance agent is a maintenance hybrid comprised of a special kind of Oligomer Silsesquiloxane mixed in a water-based solution, formulated with powerful surfactants attributing to its excellent-resistance properties and a non-yellowing methyl silane hybrid, which reacts with the moisture and CO2 in the air, forming a nonsolvent based resin that penetrates into the substrate heightening its water proofing ability. Its ability to penetrate deep into the concrete, as deep as 3~5m/m, distinguishes it from other products on the market. Moreover, it can cause a chemical reaction with alkaline materials that produces crystals inside the concrete, that can fill and block the micro-vein within the concrete so as to reach the waterproof effect in depth; thus, the longevity of the building can be extended.

APPLICATION
Water, anti-pollutants and anti-weathering resistance for various surfaces such as: tiles, gaps between tiles, terra cotta, calcium silicate board , plasterboard ,bricks,concrete,
natural and process stone, stone carving, stone washing, stone smoothening, stone cutting,sidewalks, parking plywood.

ADVANTAGES
* Highly active molecule that is eco-friendly, water-based and inorganic produces strong
adhesive to the substrate after chemical cross-linking.
* High permeability and excellent durability.
* Non-yellowing, no stain contaminated, dirt can be easily washed off with water from rain
or washing walls.
* Excellent water repellent ability (the so-called Lotus effect) can effectively prevent
from water permeating.
* It is suggested to apply new coat regularly every three years; thus it can continue to
maintain water-repellent and anti-pollutant functions.

DESCRIPTION
Is a cement based waterproofing slurry which contains a high quality polymer and selected filler such as silica sand and other additives. When it dry will provide a hard and abrasion resistant waterproofing layer which can be tiled over sucessfully.

USES IN APPLICATIONS
* Is suitable to make a protection waterproofing layer on
* Bathroom, Kitchen & Laundry Area
* Balconies & Terraces
* Water Tank / Water Reservoir
* External Wall

FEATURE & BENEFIT
It can be used as underlayment to prevent water seepage from the ground before laying
marble, granite, natural stone, timber floor, carpet and vinyl. DAMPSCOAT SL is compatible with concrete and any mixture of cement-sand rendering or plastering. After dry, it can be painted over with any water or solvent based paint.

DESCRIPTION
CS-501 is our key, the range of high quality, high performance and elastic sealant.

APPLICATION & FEATURES
1. Normal partition walls, brick walls, concrete walls,
and wood compartments are filled with joint.
2. Small pit filled.
3. Good adhesion to cement wall, brick, wood and porous substrates.
4. Excellent elasticity to avoid the cracking on the seams.
5. Well durability.
6. Excellent elasticity to avoid the cracking on the seams
7. Paintable, without peeling and good workability.
8. Green and low pollution.

PACKAGE & TOOLS
300ml / cartridge
Cartridge gun, Manual or Trowel

DESCRIPTION
CP-311T elastic polyester is a new type product with a special polymerization. It is a one compound high-performance elastic waterproof membrane.
The single-liquid self-crosslinking waterproof polymer with anti-fouling and wear-resisting properties is used for the coating and protection of elastic waterproof materials, roofing, wall and other elastic materials.
This product has high adhesion, elasticity, wear resistance and protection. It is water-resistant, weather-resistant and hydrophobic. It is the best choice for long-term protection.


SPECIFICATIONS
1. AppearanceWhite Emulsion
2. Solid Content48~52 %
3. Viscosity3000 ~ 6000 cps(RVT#3@25)
4. Proportion1.15~1.25


PROPERTIES
Developed with an environmentally friendly formulation that is water-based, non-toxic and low-odor, in line with environmentally friendly low VOC regulations and CNS waterproofing specifications.
The self-crosslinking single-liquid resin can make the construction work simple, and can be directly sprayed, rolled or brushed.
Suitable for indoor, outdoor, floor and wall applications with high toughness, water resistance and wear resistance
Excellent film properties: elastic value and stretchability, and excellent wear resistance
Weathering, aging resistance, can effectively increase the life of the paint
Excellent adhesion, breathability and foam resistance, which can effectively prevent surface blistering and false after application.

Description
CC-401 is a water based reinforced with acrylic polymers and graded fillers primer for concrete and masonry surfaces in order to improve adhesion between the substrate and subsequent coats.

Appropriation
For Rockflexï¼?RCï¼?Masonry System
Characteristics Ready to useï¼?Easy to apply
Improves adhesion
Improves the finish of topcoat Non-toxic

Surface preparation:
Concrete substrate shall be dry, sound, clean and uncontaminated.
All loose particles, curing compound, shuttering oil, debris etc shall be removed.
Temperature Condition: Ambient temperature shall be between 10 and 50 °C

Application:
CC-401 is applied at 4 - 6 m2/ltr depending on substrate porosity and allowed to cure for 2 to 4 hours at 25 °C before over-coating with Rockflex systems Cleaning: Clean the tools with water immediately after use.

Packing and Storage
CC-401 is available in 20 ltr pack and it shall be stored in cool, dry and shaded warehouses. Shelf life is 12 months when stored under cover, out of direct sunlight, protected from extreme temperatures and as per manufacturers recommendations. In extreme tropical climate, the product shall be stored in cooled ambience. Excessive humidity and over exposure to UV will result in the reduction of shelflife.

DESCRIPTION
Non-Skinning sealant is a one component, non-drying polybutene rubber based mastic.
It does not harden but rather remains permanently soft and paste-like. Non-Skinning sealant has excellent resistance to water vapor transmission.

FEATURES
* Permanently non-skinning
* Low shrinkage
* Moisture resistance
* Excellent adhesion

USES
* It is suitable for all kinds of plastics, metals, glass, masonry and timber.
* It can also be used in installation of cool rooms and prefabricated construction.

LIMITATIONS
* It should not be applied in exposed joints where dirt pick-up and hand contact.
* Not for: Used in areas subject to considerate dynamic stress.
* Not for: Mobile homes, truck bodies.

COLOR
White, almond other colors are available upon request.

APPLICATION
* Surface must be clean and dry.
* Cut nozzle to desired size.
* Insert cartridge into caulking gun.
* Push sealant ahead for uniform bead.
* Clean off excess sealant with kerosene or mineral spirits.

CAUTION
Use appropriate personal protection to avoid contact with skin and eyes. In case of eye contact, flush with copious amounts of water for at least 15 minutes and get medical attention. In case of skin contact, wash affected areas with hand cleaner followed by soap and water. For further information, please refer to Material Safety Data Sheet (MSDS).

DESCRIPTION
ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap.

FEATURES
* ITSEAL is the only waterproof sealer that is completely watertight.
* It is highly water repellent that no water can get through it during storm.
* It adheres well on aluminum and glass
* Once dried, ITSEAL is flexible and accommodate joint movement due to vibration.
* Mill finish aluminum, oil or wet surfaces can also be well-sealed.

VOC CONTENT
Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr.

SURFACE PREPARATION
For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB.
This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use.

APPLICATION
ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance.

LIMITATION
* Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it,
let it dry overnight and fill it up the next day.
* Not suitable for use as expansion joint.

COLOUR AND PACKING
26 kg / pail
Grey/Black/Bronze/White

SAFETY INFORMATION
* ITSEAL is flammable. Please keep away from sources of ignition during application.
* Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated
area or confined space.
* Avoid contact with skin and eyes. If swallowed please contact doctor immediately.
* ITSEAL meets the requirement of RoHS regulation of European Union and it does not
contain eight heavy metals which were restricted by ASTM F963 or EN71 part3.
* Please read the Material Safety Data Sheet in regards to flammability and health and
hazard.

SHIPPING/STORAGE INFORMATION
ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation.
Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.

DESCRIPTION
ITLS simplySEAL Concrete Seal is a high performance waterborne acrylic
coating which provides a protective and decorative seal for concrete and
masonry. Suitable for use on new and old concrete.

USE
* Suitable for use on concrete, bricks, pattern paving, pebble finishes
(including exposed aggregate pavements), clay pavers, masonry,
sandstone, slate, and unglazed tiles,
* Exterior driveways, carparks, pavements, pavers, patios, overlays.
Interior residential, commercial, and light industrial factory and
warehouse floors.

FEATURES & BENEFITS
* Low VOC (

DESCRIPION
FR-48 is solvent-less moisture cure type, single-component flame retardant RTV silicone product. It is suggested for use in applications requiring neutral cure, fast cure and excellent adhesion.

FEATURES
* Sealing of electrical components
* Industrial plastic sealing, electrical insulation properties.
* Low flammability â?? has a UL rating of V-0(1)
* Primerless adhesion to plastics and metals
* Excellent resistance to moisture, dust, UV and ozone.
* Fast room temperature curing
* High temperature resistance (Flexible from -60â?? to 200â?? continuous operation and
260â?? for short periods)

COMPATIBILITY
FR-48 contamination -free silicone sealant shows excellent adhesion for Al panel, stone, glass, PVC, or wood. As new construction materials appear and the material surface treatment method varies, some materials may cause poor adhesion or discoloration.
FR-48 contamination-free silicone sealant is chemically stabilized, maintains a uniform paste shape all the time, and may be workable at the temperature range of -25â??~50â?? unless there is moisture.

LIMITATION
* For structural construction
* At completely enclosed space
* On frosty or wet target surfaces
* For the parts with potential continuous flooding
* In the internal fire area
* For materials where oil, plasticizer, or other solvent is leaking.
* For polypropylene, polyethylene, polycarbonate, or Teflon material.
* At horizontal : joints potential physical friction
* For the parts requiring painting on the sealant
* For materials with surface temperature over 50â??

PACKING 300ml Cartridge
COLOR White and grey

STORAGE
Shelf life is 1 year if stored unpacked in cool and dry condition away from direct sunlight.

AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time.
AFTEK FLEX-PRO MS is free of solvents, isocyanates, silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates. It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc.
and it is compatible with most of paint systems.It has very good UV resistance property that can be used for interior and exterior applications.