HYDRAPULPER
Type:High consistency pulper,D pulper,O pulper,Drum pulper
Application: Mainly used for board and wster paper,OCC pulping.
Its main structure is vat body,impeller,stator ring and electric motor etc.Generally the rotatry table's circumferential speed is 1000m/min,the diameter of vat body is 1-6m.
Our company have many sizes of hydrapulpers for example 1-30m3 .
Huatao supplying different type Pulper for Paper Plant,such as high consistency pulper,D shape pulper,Drum pulper etc. This machine can be used to make different kinds of waste paper, recycled paper, virgin pulp, wheat stalk,sugar cane bagasse, catton stalk, wood as as material to make tissue paper, kraft paper, testliner paper, writing paper, printing paper, newsprint paper. hydrapulper is suitable for the separate of the fibre, purification of the thick liquid material and select thickly pulping equipment, can be continuous or intermittent treat with various with different pulp, semi-chemical pulp, pulp board (meal), goods wasted paper and so on.
Huatao supplying different type Pulper for Paper Plant,such as high consistency pulper,D shape pulper,Drum pulper etc. This machine can be used to make different kinds of waste paper, recycled paper, virgin pulp, wheat stalk,sugar cane bagasse, catton stalk, wood as as material to make tissue paper, kraft paper, testliner paper, writing paper, printing paper, newsprint paper. hydrapulper is suitable for the separate of the fibre, purification of the thick liquid material and select thickly pulping equipment, can be continuous or intermittent treat with various with different pulp, semi-chemical pulp, pulp board (meal), goods wasted paper and so on.
Used in paper and pulp industry for breaking waste paper and wet-strength paper. This equipment is fitted with P.S. Vokes rotor, which can strengthen hydraulic cycle and fiber defiberizing and also perform continuous breaking with lower energy consumption. Rotor deviates from the center of trough body and trough body structure is D-shape, which can make the contact between pulp and rotor quicker, with higher frequency.Thereby, on condition of not increasing power and volume, capacity can be increased. Rotor and extraction disc are above the bottom plane of trough body, thus, one low-pressure flow area can form around rotor to gather heavy impurities, thereby the service life of rotor and extraction plate can be extended.
Used in paper and pulp industry for breaking waste paper and wet-strength paper. This equipment is fitted with P.S. Vokes rotor, which can strengthen hydraulic cycle and fiber defiberizing and also perform continuous breaking with lower energy consumption. Rotor deviates from the center of trough body and trough body structure is D-shape, which can make the contact between pulp and rotor quicker, with higher frequency.Thereby, on condition of not increasing power and volume, capacity can be increased. Rotor and extraction disc are above the bottom plane of trough body, thus, one low-pressure flow area can form around rotor to gather heavy impurities, thereby the service life of rotor and extraction plate can be extended.
Application: the machine is made of special alloy steel with special alloy steel, and the material is very durable. The bottom knife adopts turbulent design to improve dissociation ability. Rotary knife adopts high reflow umbrella vortex design for various types of pulp board and waste paper. Intermittent operation, especially suitable for waste paper with high wet strength.
Use: used for shredding the pulp board, paper machine under the damaged paper and all kinds of waste paper Structural characteristics: can be used according to the raw materials of the corresponding operation mode, the use scope is wide Specification: 2m3-7m3 processing capacity: 15-600tpd
Use: used in the deinking process for the high concentration of waste paper Structural features: Compact structure, high rotation efficiency Three wire helical rotor tower type, can effectively promote the pulp cycle, increase the friction between the pulp fiber, which can realize high concentration of mild beating, relief fiber cloth broken impurities at the same time.
Series type D waterpower pulp machine is mainly used for OCC, intermittent or continuous pulp products such as waste paper, sedimentation in the heavy impurities in a separate waste emissions, prevent damage of equipment by heavy metal, plastic and can be ruled out. The d-type series hydraulic pulping machine is based on the existing traditional vertical shredder based on the foreign information design. Its main characteristic is: vex rotor deviation center position, make the pulp and rotor contact more quickly, more frequency. Traditional waterpower pulp machine to produce a rotary flow unimpeded, paper material from join according to spiral line to the center of the rotor in sports, and type D hydrapulper has changed the way of the flow, make the paper material more quickly in contact with the rotor, which can shorten the paper into pulp material handling time, and without any increase in power and volume under the condition of increasing production capacity. Type D series waterpower pulp machine is equipped with a general twisted rope machine and sediment well, twisted rope machine can remove tangling impurities, such as plastic bags, rope, wire, recommend to the twisted rope of maxhine ZTS1, tub at the bottom of a rectangle interface, the pick up sediment Wells by impurity separator to remove the plastic foam and other impurities, realize the continuous production, sediment at the bottom of the well sedimentary heavy impurities regularly. The interface can also be used only for batch production 2. Structure principle D type hydraulic shredder is mainly composed of D type tank, rotor and pulping disk, bracket, motor and protective cover. Pulper tank affusion 1/2 solutions, start the motor, pulp board, damaged paper or paper evenly into the tub, the rotor rotates, slurry from the center to throw around, in its at the center of the vortex, slurry by the strong hydraulic shock and shearing action, produce intense friction and gentle rub each other, at the same time due to the effect of impact of the rotor to make pulp board, damage of paper under the wet pulp, dissociated into single fiber, separation by organization of the pulp flow through the screen mesh, foreign body, heavy slag collection in sediment tank regularly; In continuous operation, the foreign body and heavy slag enter the sediment well, and the impurities are treated by the impurities separator. Because of the special structure, the series of waterpower pulp machine tub when the rotor rotation, slurry flow by the tub D shape face block bends to the center, shortened the slurry return path, pulp by beating frequency is higher. Unbroken pieces of paper and fiber bundles are further unsolved in the gap between the rotor and the screen. Because of the special shape of the tail of the blade, it has the function of keeping the mesh not blocked. It can greatly prolong the continuous running time and improve the working efficiency.
Application: Used in paper industry for breaking pulp sheet, broke and waste paper. Features: This equipment is fitted with P.S. vokes rotor, which can strengthen hydraulic cycle and fiber defiberizing and also perform continuous breaking with lower energy consumption.