Forming fabric are designed to retain as much fiber components as possible, meanwhile allowing water to drain through them.
Forming fabric can be divided into single, 1.5, double, 2.5, triple (SSB) layer. Which applicable to the machine speed up to 2000m/min.
Forming fabric is characterized by smooth surface without edge curl, good stability and less elongation, unique drainage channel without leaking, good runnability with low load, good fiber support and excellent formation, good life potential
screen Basket
Type:Outflow screen basket,Inflow screen basket
Materialï¼?202,304,316,316L
The purpose of screening is to separate contaminants such as shives in mechanical pulp,and stickies,plastics ,sand ,metal pieces,and flakes in recycled fiber. This method employs a screening device and the separation is based on size difference between fibers and contaminants. However,depending on their flexibility and /or geometry,not all of the contaminants that are larger in size than fiber can be captured by the screen.
Screening plates of various slit widths such as 0.10mm,0.15mm, 0.20mm,and 0.25mm have been used in separating contaminants.
Fiber Fractionating Screen
To screen roughly or finely waste paper pulp and to select pulp before paper-making machine.
In the machine the up-flow structure is applied ,where pulp is entered from the bottom,weight
dregs are discharged from the bottom and light dregs are discharged from the top.
Feature:
1. It can be equipped with various forms of rotors according to the nature of the pulp stock.
2. It can be equipped with various forms of sieve drums, such as plain weave and corrugated sieve drums, and so on.
3. It is easy to clean, adjust, examine and disassemble the sieve drum and rotor.
4. The pulp is fed from the upper part and from the low part, avoiding the cross.
5. The steady base and open design can cause that the belts, belt pulleys and positioning bolts is easy to maintain and replace.
HYDRAPULPER
Type:High consistency pulper,D pulper,O pulper,Drum pulper
Application: Mainly used for board and wster paper,OCC pulping.
Its main structure is vat body,impeller,stator ring and electric motor etc.Generally the rotatry table's circumferential speed is 1000m/min,the diameter of vat body is 1-6m.
Our company have many sizes of hydrapulpers for example 1-30m3 .
Chain conveyor / pulper feed conveyor
Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.
Chain feed width :1200-2600mm
Capacity feedï¼?60-600m3/h
Motor power:3-55kw
Huato supply high quality pressure screen
1. Upflow presssure screen
Application: Used for coarse screening and fine screening of the deinking pulp,waste paper pulp.
2. Outflow presssure screen
Application: Outflow pressure screen used for coarse screening and fine screening of the chemical pulp,waste paper pulp
3. Inflow pressure screen
Application: Used for the screening of low consistency pulp before the paper machine.
