Basalt fiber rebar high-strength non-metallic composite reinforcement made of basalt fibers, which is not exposed to water and salt.
RBC types (diameters) 4mm, 6mm, 7 mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm.
Resistant to corrosion
Basalt armature perfectly resists corrosion, which in the future will not break the integrity of concrete elements. In addition to this, it does not change its original properties even under the influence of severe conditions.
Lightness
It is lighter relative to steel by 80%. Due to the low density, reinforcement on the basis of the composite is 5 times lighter than steel and almost 2 times heavier than water. Under the same strength conditions, the weight is 9 times less than steel. This significantly minimizes the cost of transportation, loading, unloading and general construction work.
High strength
Basalt reinforcements are 100% stronger than its counterparts. This is proved by the gap indicator, which is 2 times higher than that of the brand A III. Consequently, the estimated area will be much smaller.
Cost effective
By purchasing composite reinforcement, you can significantly reduce financial costs in construction.
With Basalt - you have more materials for less payment.
High Strength BFRP Basalt Fiber Rebar Pultrusion Rebar Rods for Construction Engineering Diameter 3-40mm Basalt fiber reinforcement polymer (BFRP), also called Fiber Reinforce Plastic, is a new kind of composite material which basalt fiber comnbines with epoxy resin andcuring agent. BFRP Rebar is a kind of rustless electrical insulator, with non-magnetic, especially with great acid resistance and alkali resistance. It could develop the durability of construction. With light weight property, its density is about 1.9-2.1g/cm3, about 1/4 of steel. Technical Index of BFRP Rebar Diameter(mm) Ultimate Tensile Load (KN) Crosssection (mm2) Ultimate Tensile Strength (Mpa) E-modulus (Gpa) Ultimate Shear Strength (Mpa) Weight(g/m) 6 28 28 1000 >50 >150 56 8 51 50.3 1000 108 10 79 78.5 1000 166 12 113 113 1000 245 14 108 133 810 285 16 142 177 800 373 18 182 227 800 470 20 228 284 800 570 22 277 346 800 720 25 362 452 800 1050 Main Features of BFRP Rebar: Non magnetic, Electric insulation, High strength, High E-modulus, Coefficient of thermal expansion near with cement concrete. High resistance to corrosion, acid, alkali and salt. Application: Earthquake observing station, Metro station,bridge, Seaport pier protection engineering and construction, Non magnetic or magnetic concrete construction, Prestressed concrete highway, Anti-corrosion chemical industry, Chemical storage tank, Underground engineering, MRI(magnetic resonance imaging) facilities basis, Communication building, Electronic equipment factory, Fusion buildings, Concrete guide board of Maglev railway, Telecommunications transmission tower, Television stents and strengthen core of Optical fiber cable.
1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Supplier: Basalt fiber, basalt fiber rebar (different diameteres), flexible connections, basalt rebar grid and basalt stone
Basalt Rebar Basalt rebar is a perfect material for civil and industrial construction with continuous spiral ribbing formed by means of winding by basalt strip oiled in highly durable polymeric compound. Basalt Rebar is an alternative to steel and fiberglass for reinforcing concrete. Basalt Rebar is demanded in the construction market, nevertheless, many people are not even aware of its existence. The material has many useful features which are essential for modern construction, due to which it is in serious competition even with metal. A basalt rebar consists of numerous basalt filaments, which being bound to each other, create a durable and a strong bond, thereby forming an excellent material for construction. Despite the fact, that for a long time, the rebars for the construction, have been made entirely of metal, recently the situation has dramatically changed, as basalt has also become a prospective one, which means that its quality and features will be improved with time.
Basalt Fiber Chopped Strands are usually coated with a sizing/binder to make them compatible with other materials and elements with which it has to co-exists the primaryend product, this product is recommended to use for making non-woven mats, chopped strands mat, veils, brake, linings, clutch, plstes and for reinforcement of concrete and asphalt highway. It is a good choice to take place of other cost fiber and steel fiber.