Description
CA-003W Waterproof Agent is a high-grade liquid additive that gives the dual benefits of
providing significant improvement in workability along with reduced water absorption. The addition of CA-003W to a mortar mixture enhances the plasticity of the mixture by creating a â??ball-bearingâ?? effect. At the same time, the microscopic capillaries are rendered
discontinuous, thereby impeding the flow of liquid through them, and finally reducing the
permeability of the mortar. CA-003W contains special polymers that reduce formation of shrinkage cracks. The improved cohesion provides lower rebound loss supplemented by a greater coverage. The increase in coverage can be up to 20 %. This makes significant cement savings possible. The spreading and smoothening is also made much easier.
The efficiency of labor is increased, and plastering can be done in a single operation.
CA-003W provides the mortar with efficient,reliable and durable damp proofing against acute rains, ground water moisture as well as environmental humidity.
Thus the use of CA-003W provides significant benefits, while keeping plastering economical.
- Pure Poly urea - Zero VOC's, 100% solid. - It is two liquids high temperature and pressure spray coating paint. - Short initial curing time (30 sec) - Cures at low temperature. - Excellent resistance to thermal shock. - Excellent resistance to solvent, oil and acid(chemical) - Excellent bond strength to properly prepared surface.
- one component Water-based acrylic waterproofing materials - Excellent waterproof performance, strong elasticity, adhesion and durability. - Applicable areas * Exterior wall and roof of the building * A place that requires waterproofing of various building such as concrete. - Prevention of penetration of moisture in cracks. - Excellent adhesion to concrete, water resistance . - It's safe to work with eco- friendly products. - It is possible to work on moist construction areas (but less than 30% wet)
- One component polyurethane waterproofing materials - No problem with mixing - Good adhesion to substrate - Persistence and chemical resistance - Easy application and repair - The elongation as a material with excellent elasticity -
DESCRIPTION CA-002W(12) is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. After mixing grout with CA-002W(12) can increase water resistance and bonding strength. AREA OF APPLICATIONS * Repair Mortar for Concrete Areas * Industrial Flooring * Bonding Agent for New to Old Concrete * As Cement Grout Additive * Enhance adhesion strength of Mortar. PACKING & STORAGE 20kg per plastic pail. Please store in cool places and avoid direct sunlight.
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
English name: Calcium Nitrite Molecular formula: Ca(NO2)2 Molecular weight: 132 CAS NO. 13780-06-8 HS CODE: 28341000 UN NO.: 2627 5.1 type oxidizing agent Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution. Specifications: Item Superior grade First grade Second grade Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90 Calcium Nitrate[Ca(NO3)2 as dry basis]%
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent
Commodity: Sodium Metabisulphite Molecular formula:Na2S2O5 Molecule Weight:190.10 H.S code:28321000 CAS:7681-57-4 Product Features Appearance : White Or Light Yellow Crystal Powder Odour: Sulfur Dioxide Taste : Salty Melting Poing : 150 Specific Density1.48 Ph : 4.0-4.6 Solubility : Soluble In Water ,insoluble In Alcohol Application: 1. For industry Mordant of printing and dyeing; Dechlorinate of textile after bleaching; Sulphonated agent and reducer of chemical industry and pharmacy; Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ; The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment. 2.For food additive Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc) Specifications: Na2S2O5 97% min SO2 65% min Fe 0.0015% max water-Insoluble 0.01% max As 0.0001% max PH 4.0-4.6 Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Commodity : Soda Ash Light / Dense Molecular formula:na2co3 Molecule weight:105.99 H.S Code:28362000 Cas: 497-19-8 Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air. Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry. Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers Specifications standard : gb210.1-2004 Items : specification First grade : specification Second grade Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min Chloride content(as nacl) %0.7% max0.9% max Iron content(as fe in dry base) /%0.003% max0.0035% max Sulphate content(as so4 in dry base) /%0.03% max0.03% max Water insoluble matter /%0.03% max0.03% max Loss on ignition a/ %0.5% max0.5% max
