Oxygen Lance Pipe

If someone want to buy high quality oxygen lancing pipe contact with us:high quality oxygen lancing pipe manufacturer

High quality MILD STEEL OXYGEN LANCE manufactuer,send inquiry to us now freely. Thermal lance also known as burning bar or thermic lance, made by hollow mild steel pipes filled with a number of iron wires, which is a powerful efficient cutting tool by high purity oxygen flow through the interior of the lance to create extraordinarily high temperature from 3,600 to 4,426�°C for cutting through just about anything. Thermal lance can be used whenever some ferrous and non-ferrous materials must be removed or cut into pieces, like sand casting riser cutting or ladle furnace tapping. When molten material is spilled, it can be allowed to solidify and then cleaned up with thermal lance. For coastal buildings, interior concrete sometimes breaks down to produce what is called concrete cancer, but thermal lance can be used to remove this degrading concrete so that replacement material can be packed in. These characteristics of the thermal lance make it a particularly efficient and cost-effective method of cutting steel and cast-iron materials too thick to be cut with a normal oxy-acetylene torch. In the case of thicker materials, during the operation, the lance tube will be consumed by the intense heat at the cut point and should be discarded once it becomes too short to be safely used.

Supplier: Oxygen lancing pipes and thermal lance pipes

Jiangsu Xingrui Piping Co.,Ltd was formed to provide OXYGEN LANCE and THERMIC LANCE to the commercial steel-making and foundry casting industry. We provided the base of industry blow oxygen or inject carbon into electric arc furnace solutions and skilled experience of exothermic cutting methods. Today, the company operates within a 24,000 square foot multiplex in China,this location offers a large inventory storage capability and four workshops for complex on-site fabrication capable of designing and producing standard or customized oxygen lancing pipe & thermic lances.All Xingrui pipes are manufactured according to the highest relevant safety standards and passes our rigorous quality controls before dispatch.Innovation and inspiration,we always meet and value your various requirements. carbon steel pipe

High Quality Seamless Steel Pipe Manufacturer

(1) Minimum Consumption The calorized layer and the refractory coating layer together generate the strong heat resistance and anti-oxidation to achieve minimum consumption of lance pipe to cut down your cost. (2) Superior Quality Strict quality control is made at each production process over the raw materials to the finished products. (3) Economical Price Low price with high quality is achieved through mass production at our most advanced factory. USES: (1) Cutting steel scrap, melting and refining steel at electric arc furnace. (2) Injection of carbon, lime powder and/or other additives for adjusting grades of carbon steel or special steel. (3) Removing slag inside oxygen converter. (4) Other uses which require strong resistance against heat, oxidation, vanadium attack, etc.

A professionally manufacturer focus on OXYGEN LANCE PIPE and THERMal LANCE PIPE industry from the year of 2011,over the past several years we dedicate ourselves to design and produce high efficient lances for blast furnace steel making and foundry die casting using, time goes by, the advanced technology leading us to be the most famous quality supplier in this industry nowadays. Specifications 1.Minimum OD: 21.25mm 2.Coating Thickness:Inner 0.1~0.2mm;Outer 0.8~1mm. 3.Steel Grade:Q235 Carbon Steel 4.Connection:Both End Threaded with Couplings.

Calorised Steel Pipe is continuously hot dip diffusion coated inner & outer with an aluminum coating according to the standard of GB/T18592-2001.The hot dip diffusion process, pioneered by Xingrui, provides a tight metallurgical bond between the steel and the coating,lance pipe lasts five to seven times longer than mid steel pipe in oxygen injection,also shorten the tap-time in the oxygen enrichment operation In our calorising process, the diffusion layer formed is a mixture of iron and aluminides, dependent on the substrate material, with an aluminium content of between 30 and 45 wt. % at the surface. The percentage of aluminium gradually decreases through the diffusion zone to that of the substrate material. This process results in a material with the strength of steel plus the corrosion protection of aluminum, and the synergistic heat protection of an aluminum alloy,high temperature resistance can reach to 600 In any calorising process, components are placed in a steel retort surrounded by a powder mixture containing aluminium, a halide and an inert diluent. The retort is then sealed, placed into a furnace and heated to an elevated temperature, held at temperature and then slowly cooled back to room temperature. After cooling the components are removed from the retorts and cleaned to remove any compound or residues. In the process of steel manufacturing by open hearth or electric furnace, the consumption rate of lance pipes for oxygen injection sows rather high ratio owing to high temperature and severe oxidation. In general, steel pipes are used as lance pipes for oxygen injection. If mild steel pipes are treated by this process consumption rate of lance pipes will increase 6 - 7 times. It is necessary to make the pipe fireproof as a first step. Special treatment is then needed to protect the pipe from any falling-off or scaling-off by shock or by bending stress. As a result of research conducted over many years, it was discovered that the most effectual method is to diffuse aluminium into the pipe's surface, so as to promote wear proof properties on steel pipe. That is to say, calorising is to be carried at, in and outside of the steel pipe to promote wear and fire proof properties of the pipe. Comparison with Mild Steel

Supplier: Calorized Oxygen lancing pipes, and, thermic (thermal) lance pipes