6' X 5' X 5' Galvanized Kennel

Granite

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.

According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.

According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

TYPES
1
Cement 42.5 N
CEM II/A-L
Bulk
2
Cement 42.5 R
CEM II/A-L
Bulk
3
Cement 42.5 N
CEM II/A-L
Big Bag 1.5MT
4
Cement 42.5 R
CEM II/A-L
Big Bag 1.5MT
5
Cement 42.5 N
CEM II/A-L NA 442
Bag 50Kg BUNDLED 2,2 MT per pallet
6
Cement 42.5 N
CEM II/A-L NA 442
Bag 25kg BUNDLED 2,15 MT per pallet
7
Cement 42.5 N-LH/SR5
CEM I
Bulk
8
Cement 42.5 N-LH/SR5
CEM I
Bag
9
Cement 52.5
CEM I
Bulk
10
Cement 52.5
CEM I
Bag

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

Please contact for full specs on quantities, delivery terms, etc...

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

Features
1. Develop children's logical thinking ability.

2. Exercise cooperative skills and improve hands-on skills.

3. Enhance the ability to distinguish shapes and things.

4. Promote hand-eye coordination and stimulate sensory development.

5. Develop brain thinking and recognize different color

Lime pink hand Cutting 600x150mm

Material: PE, PVC
Roll: 1.82 x 100 m; 0.92 x 100 m
Sheet: 10 x 10 m ; 3.6 x 5.4 m
Quantitative: # 1000 ; # 3000
Color: Blue
Packing: dup-rolls (Rolls); OPP Bag (Sheets)
Details: eyelets
Other: OEM

Lime stone BUCHING 600x150mm Pattern-3

* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.