Brazed Plate Heat Exchanger

Working Temperature - +200'C ~ - 200'C Max Pressure - up to 45 Bar Thickness - 0.3 mm SS316L, Cu - 99%; SS304 - optional

Brazed plate heat exchanger Bl14 n means number of plates Length (mm): 206 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 0.7+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc Bl14a n means number of plates Length (mm): 190 Width (mm): 80 Thickness (mm): 10+2.3n Weight (kg): 0.9+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc

Brazed plate heat exchanger Bl20 n means number of plates Length (mm): 310 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 1.0+0.08n Channel volume (l): 0.018(n-2) Exchange area (m2): 0.020(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc

Brazed plate heat exchanger Bl26 n means number of plates Length (mm): 325 Width (mm): 111 Thickness (mm): 10+2.35n Weight (kg): 1.3+0.13n Channel volume (l): 0.025(n-2) Exchange area (m2): 0.026(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc

Brazed plate heat exchanger Plate material: aisi316l/304c Connection material: aisi304 Brazed material: nickel/copper Max design tempt: 150grc/225grc Min design tempt: -160grc Max design pressure: 30barg/45barg Advantages of brazed phe: Compact structure and easy installation Small consumption of water Low scaling coefficient Light in weight and durability

Industrial equipment Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked and brazed. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Compared with the conventional shell and tube heat exchanger, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption, and it has a tendency to replace the shell and tube heat exchanger within the applicable range. Applications: Refrigeration: used as condenser and evaporator b. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc. c. Chemical industry: soda ash industry, ammonia synthesis, alcohol fermentation, resin synthesis cooling, etc. d. Metallurgical industry: heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc. e. Machinery industry: cooling of various quenching fluids, cooling of reducer lubricating oil, etc. Design Parameters Flow range: 1-2000 m3/h Working pressure: vacuum-8.2MPa Operating temperature: -195-538C Interface size: 1"-DN300 welding, flange, thread and other connection forms Corrosion resistance: Welding seal without rubber gasket, choice of various metal and alloy materials, super corrosion resistance, longer service life. Application field: Crude oil, natural gas purification and chemical products; chemical industry; pharmaceutical and specific chemicals; injection control systems; HVAC, district heating, thermal power plants; food processing; cooling tower heat recovery Process requirements Pickling temperature: Raising the pickling temperature is conducive to improving the descaling effect. If the temperature is too high, it will aggravate the corrosion of the pickling solution to the heat exchanger plates. Through repeated tests, it is found that the pickling temperature should be controlled at 60. 2) Concentration of pickling solution: According to repeated tests, the pickling solution should be prepared according to the concentration of formic acid 81.0%, water 17.0%, buffer 1.2%, and surfactant 0.8%, and the cleaning effect is excellent. 3) Pickling method and time: The pickling method should be carried out by a combination of static soaking and dynamic circulation. The pickling time is static soaking for 2h first, and then dynamic circulation for 3~4h. During the pickling process, samples should be taken frequently to test the pickling concentration. When the difference between the two adjacent test concentrations is less than 0.2%, the pickling reaction can be considered to be over. 4) Passivation treatment: After pickling, most of the scale and metal oxides on the surface of the plate heat exchanger will be dissolved and fallen off, exposing new metal, which is very easy to corrode. The sheet is passivated.

In prevention of two different kinds of fluid from intermixing caused by internal leakage, KAORI precisely designed the D Series solution with the double-stacked plates, to eliminate the possibility of cross contamination. The unique air gap is created between the two plates. Once the internal leakage occurs, the 2nd plate becomes the shield to keep the liquid stay and flow on the same channel through the air gap. Meanwhile, vent holes outside the plate will seep out the liquid as an indication of leakage.

We are the leading manufacturers of Air heat exchangers in India. Brazed Plate Heat Exchangers represent the most compact, rugged and cost-effective means of transferring heat in many industrial and refrigerant applications. Built from 316 stainless steel with copper brazing materials, they provide exceptional corrosion resistance. The SB-Series features corrugated plates that produce highly turbulent flow in a true counter-current direction. This results in high efficiency and a very compact heat exchanger design. Due to the smaller size and reduced material content, they can be the most economical heat transfer choice.API Heat Transfer Brazed Plate Heat Exchangers are available for process and refrigeration applications. Made from stainless-steel plates and copper or nickel brazing materials, they are suitable for a wide variety of heat exchanger applications. Specifications The brazed plates form two separate channel systems. The two media assume a true countercurrent flow, completely isolated from each other. This channel configuration is designed to produce high turbulence, promoting maximum heat transfer. Applications Hydronic heating Domestic hot water heating Radiant heating Snow & ice melting Chilled water cooling Beer & wort chilling Hydraulic oil cooling Outdoor wood furnaces/stoves/boilers and other water to water and liquid to liquid heat transfer applications. Advantages Flexibility to change plate arrangement and to add or remove plate Optimized heat recovery Easy maintenance and suitable for CIP, plate pack easily accessible No mixing of product High heat transfer coefficients Compact constructions

Gasket plate heat exchanger Plate material--applicable fluids Stainless steel(sus304, sus316l)--clean water, river water, edible oil, mineral oil Ti--sea water, salty water, salinous compounds 20cr, 18ni, smo--low concentrated sulface acid, inorganic water Nickel--high temperature and high concentrated caustic soda Hastelloy--high concentrated sulfate acid, chloride acid, phosphate acid Gasket material(applicable temperature)--applicable fluids Nbr(-15grc~135grc)--water, sea water, mineral oil, salinous water Epdm(-25grc~180grc)--hot water, steam, acid, alkali F26(-55grc~230grc)--acid, alkali Ftp(0grc~160grc)--high concentrated acid, alkali, high temperature oil, steam Advantages of gasket phe: .High heating transferring coefficient .High heat recovery rate .Great flexibility .Low flow stagnation .Compact structure and easy maintenance