Description
This portable gold trommel plant is self contained, and with its 1-5t/h capacity, it is ideal for testing gold values or for small production operations. The unique water supply and reclamation unit allows operation where water is not available.
A spray bar with its own adjustable water valve goes the length of the trommel. Next, the material approaches the 8mm holes where anything under 8mm gets washed down onto the oscillating sluice, and larger material works its way to the end of the trommel. A nugget trap will catch any heavies and the lighter material will go out the tail cone to the rock chute and discard tray. The oscillating sluice has settings for stationary, short, and long strokes. The removable sluice has artificial turf, riffles mounted on expanded metal and toggles to secure it onto the place. Any light material that gets washed off the sluice goes into the de-watering screw.
The simplicity of this equipment makes it the leader in the field of small portable placer equipment. Industrially built, it is easy to maintain and powered by either an electric or diesel engine which is easily removable by removing the snap pin and sliding out the motor mount. It was designed that way so you can easily take it with you at the end of the day to cut down on theft. On engine runs both the gear reducer and water pump using a B-width belt. This trommel plant is a positive chain drive.
Main configuration
1. Trommel screen
The aperture size of the trommel screen could be customized as per your requirements.
2. Mobile device
3. Water pump
4. Water storage tank
This gold trommel plant recirculates approximately 0.378m ³of water. You may need to add a little water due to evaporation and the wetness of the waste material. Drain plugs are in both the water tank and the de-watering screw.
If there is enough water supply, you could cancel the tank, and let us know. Thus the price would be cheaper.
5. De-watering screw
Using the de-watering screw is the most efficient way to remove solids from water and recirculate it.
6. Oscillating sluice
7. Diesel engine
8. Lifting lugs
9. Lighting
Technical specification
Trommel size: 500*1200mm
Capacity: 1-5t/h
Power source: diesel engine
Power: 8HP
Screen aperature size: customized
Dimension: 3800*1550*1960mm
Bds dj-502a electronic balance High-precision straining resistance sensor Strong anti-overload function Optional power saving mode With lcd display, blue backlight (optional) Operating temperature: 10 to 60 â?? Unit:g/ct/oz/ozt/dwt/tola/lb/tmr Capacity:300g, 500g, 600g, 1000g, 1200g, Readability:0.01g, 0.01g , 0.01g, 0.01g , 0.01g, Battery:battery 6v + adapter 12v/1ah Balance size:270*170*80mm Platform size:120mm Net weight:1.38kg Packing:6pcs/carton, total 17.5kg, color box
Californium is a very strong neutron emitter. It is used in portable metal detectors, for identifying gold and silver ores, to identify water and oil layers in oil wells and to detect metal fatigue and stress in aeroplanes. it is an actinide element, it is a silvery white radioactive metal with chemical symbol of CF
Electronic luggage scale LED Display 50kg/110lb digital hanging scale, portable weighing scale travel scale. Color: Jet black/black/red. Product Information: * Colorful handle design with metal connector & belt * Capacity: 50KG * Division: 0.1KG * Unit: kg/lb * LED display size: 30x14mm * Product size:140x34.5x43mm * Auto-off: 30s * Low battery indication: Lo * Error/overload indication: Err * Power: 2x1.5V AAA battery (not included) * Color:Red, rose pink, white, gold, customized
Supplier: Portable barrel (5kg, 10kg), tank (for gold plating), nickel tank & filter (for nickle plating), copper tank & filter (for copper plating), laquor tank & filter, zinc tank & filter, sainide tank & filter, laquor blower, etp, rectifier, air blower, oven, dryer
Services: Manufacturing
Buyer:
Supplier: Fabrication Of Mining Equiptment, Gold Recovery Plant, Mineral Concentrator(centrifuge), Mineral Jig, Scrubbers & Trommel, Vibrating Screen, Crushing Machine,Feed Hopper & Conveyors, Inline Leach Reactor, Automation Systems(vsd, Hmi & Plc), Electrical Distribution Box
TX001 Portable Jump Wire Soldering Iron Replaceable JBC T210 Welding Iron Tip for Mobile Phone PCB Soldering Repair, heating up quickly, 2 seconds up to 380 degrees. quick cooling, automatic sleep, QC Quick Charging Adapter, replacing damaged or unusable iPhone motherboard repair. Features: 1. Small size, easy to carry and use, suitable for soldering jump wire/solder wire on the motherboard. 2. Heating up quickly, 2 seconds up to 380 degrees. Quick cooling, automatic sleep, wake up with a touch, 3-gear adjustable temperature. 3. TYPE-C power supply interface, and charge with power bank or other USB power supply. Voltage 5V-12V, current 1A-5.9A is available TX001 Portable Jump Wire soldering iron Specification: Model: Portable Jump Wire Soldering Iron TX001. Voltage: 5-12V. Current: 1-5.9A. Temperature: 0-450 degrees (350-400-450 degrees adjustable). Features: compact, portable, fast heating-up, quick cooling, automatic sleep, adjustable temperature. USB 210 Soldering Iron Features: 1. Three levels of temperature adjustable(350-400-450 degrees). 2. With status light. 3. Support QC protocol, charging head automatic voltage boost 4. Type-c sockets in a gold-plated process, high current does not generate heat. 5. The heating core clamping shrapnel adopts the same material as the JBC handle. 6. Standard 66W quick charger with QC agreement. 7. Lightweight handle, metal button, one key switch. Working Mode: 1. One key switching, three levels of temperature adjustable. 2. Green light mode 350, blue light mode 400, red light mode 450, yellow light is at sleep mode. 3. The green, blue and red light stays on shows it's heating. 4. Flashing green-blue-red light indicates that the temperature has reached the set value.
MS8910 multimeter smart SMD tester, resistance capacitance continuity diode test pen SMD component test clip, MS8910 digital multimeter 3000 counts smart SMD tester, capacitance meter LCD display, Auto Scanning, Auto Ranging, MS8910 tester, digital multimeter, intelligent patch RCD tester, resistor / capacitor / diode. MS8910 Digital SMD Tester Resistance Capacitance Multimeter Product Features : Small size and light weight, handheld and portable test tool. Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices. Auto scanning, it identifies resistor, capacitor and diode automatically. Continuity testing. When the resistance is less than 30, it will sound. It also can be operated manually. You can press the button to select one certain measuring mode. Has the function of data hold. Long press the key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication. Gold-plated test pins, which can induce its contact resistance and prevent it from rusting. Certificate: EMC. Specifications : Display: 3000 count LCD display Power supplied by: 1 3V CR2032 battery Operating temperature: 0 to 40 Celsius degree Operating humidity: