Medium-Intensity Aviation Light

Power input: ac220v Power consumption:¤15w; Flash frequency: 20-60 times/min Light intensity: 2000 cd ( 25%) Emitting color: red Light source: imported led Ingress protection: ip65 Lightning protection: 10 ka Weight: 2.6kg

Aviation light : medium intensity Instapower has developed its led based models in order to reduce power consumption to a great extent. We are able meet all the requirements and conform to the specifications defined by our clients. Our medium intensity neither require any replacement or any maintenance. They are optimised for solar based, stand-alone applications. They can easily be installed in remote areas where there is no manpower and electricity, hence, saving huge cost. This is specially designed to give a working life of 100, 000 hours and coupled with the advantage of very low power consumption. Medium intensity obstacle lights are required to be installed at buildings, which are more than 100 meters above the ground level. Our medium intensity light is designed to give a working life of 100, 000 hours coupled with the advantages of lesser power consumption. In the unlikely event of any malfunction or problem, the unit is provided with an in-built, audio-visual alarm system to warn the maintenance team. Use of quality components and sophisticated technology reduce chances of maintenance and replacement. Low power consumption, which leads to huge savings on electricity bills. Smps redundant parallel power supply ensures improved product life. Provided with rotating mechanism. Special rugged japanese motor for 360ª illumination. Optimized for solar based, stand-alone applications. Superior quality. We at instapower employ leds & other quality components manufactured by global market leaders and follow all quality checking procedures during different stage of production

Aviation light : low intensity

Main Parameter 1.Mode: CS-856 2.Standard: ICAO (Aerodromes Annex 14) High-intensity Type A , FAA L-856 3.Light intensity: -2,000cd (Night) -20,000cd (Twilight) -200,000cd(Daytime) 4.Flash rate: 40 to 60 times/minute 5.Light source: LED 6.Service life of LED: 100,000hours 7.Operating voltage: AC230V 8.Power consumption: 65W 9.Overall size(mm): 500mm286mm260 10.Installation size(mm):198mm225mmM12 11.Vertical degree: 3°~7° 12.Horizontal degree: 90°~120° 13. Material: -Housing: PC -Base: die casting aluminum 14.Weight: 12Kg 15.Emitting color: White 16.Ambient temperature: -40~+60 17.Wind load: 80m/s 18.Protection standard: IP65

T5 Tube Light Through manufacturing and supply of superior quality fluorescent tubelights, instapower has become synonymous with energy saving lighting. Along with our collection of led based, low cost lighting products, instapower offers energy saving fluorescent tube light v insta v t5. Easy to retrofit in existing ftl installations, our tubelights come with an electronic ballast and variety of other features which give outstanding performance. These are available at affordable cost, save abundant electrical energy and leads to huge savings.

We are leading manufacturer of Low and Medium Intensity LED Aviation Obstruction Light.We have supplied more then 75,500 Aviation Lights in India and other countries. Our LED Aviation Light Product Range: 230VAC / 48V /24DC Single and Dual Dome Aviation Light Dual Power 48VDC and 230V AC Aviation Light Solar Aviation Light: Low Intensity and Medium Intensity Medium Intensity Aviation Light Our light is uniform along with horizontal unlike other vendor.As per ICAO guidelines the light must be uniform. We use glass dome and not plastic. People use plastic domes (written in brochures UV Stabilized Polycarbonate Dome). You can check light on any tower which is more than 6 months old; you will find that all the plastic domes would have become brown because of deterioration of plastic with time. The light intensity coming out of the light becomes very less due to plastic becoming opaque over the period of time. We use 108 LEDs in 12 parallel circuits. The LED parallel circuits are mounted along the horizontal. So if a single LED goes bad then there is slight deterioration in intensity in that direction but there is no darkness. In most of the lights available in the market the parallel circuits are mounted along the vertical so if one LED goes bad then there is darkness in that direction. Also no one uses so many parallel circuits. We also manufacture Solar Aviation Light with fully tested branded Battery, Solar Panel ext

Application Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light. Main Parameter 1.Mode: CS-810 2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810 3.Light intensity: 32.5cd(Type B),10cd(Type A) 4.Flash rate: Steady-burning modeCustomized flashing mode) 5.Light source: LED 6.Service life of LED: 100,000hours 7.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V) 8.Power consumption: 1W 9.Overall size(mm): 124 by 124 by 209 10.Installation size: 3/4inch 11.Vertical degree: 10° 12.Horizontal degree: 360° 13.Material: -Housing: PC -Base: die casting aluminum 14.Weight:1Kg 15.Emitting color: Aviation red 16.Ambient temperature: -40~+70 17.Wind load: 80m/s 18.Protection standard: IP65 Advantages 1.PC material with good impact protection strength, thermal stability, high transmittance. 2.Bird spike against bird drop. 3.International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours. 4.LED based on obstruction light last 15 times longer than traditional light source, incandescent light. 5.About 96% less power than 116W incandescent light. 6.Major maintenance cost saving,Surge protection device inside light. 7.Strong corrosion resistance, Shock and Vibrations protection and UV protection. 8.Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day. 9.3/4inch installation size and small volume especially being suitable for telecom and flag-pole installation way. 10.There is one switch converting between Flashing mode and Steady-burning mode.

Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light. Main Parameter 1.Mode: CS-810/D 2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810 3.Light intensity: 32.5cd(Type B), 10cd(Type A) 4.Flash rate: Steady-burning modeCustomized flashing mode) 5.Working way of two lights: -Two light flashing by Main(duty)-standby way, Two lights flashing at the same time -Two light working by Main(duty)-standby way, Two lights working at the same time.(Steady-burning mode, two ways) 6.Light source: LED 7.Service life of LED: 100,000hours 8.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V) 9.Power consumption: 3W 10.Overall size(mm): 295 by 130 by 337 11.Installation size: 78 by 78 by 9 12. Vertical degree: 10° 13. Horizontal degree: 360° 14. Material: -Housing: PC -Base: die casting aluminum 15.Weight: 2Kg 16.Emitting color: Aviation red 17.Ambient temperature: -40~+70 18.Wind load: 80m/s 19. Protection standard: IP65

Power input: AC220V Power consumption:30W (day)/10W(night); Flash frequency: 20-60 times/min Day intensity:0000cd Night intensity:000cd Emitting color: White (day)/Red (night) Light source: imported LED Ingress protection: IP65 Lightning protection: 10 KA Weight: 7kg