Application
Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light.
Main Parameter
1.Mode: CS-810
2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810
3.Light intensity: 32.5cd(Type B),10cd(Type A)
4.Flash rate: Steady-burning modeCustomized flashing mode)
5.Light source: LED
6.Service life of LED: 100,000hours
7.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V)
8.Power consumption: 1W
9.Overall size(mm): 124 by 124 by 209
10.Installation size: 3/4inch
11.Vertical degree: 10°
12.Horizontal degree: 360°
13.Material:
-Housing: PC
-Base: die casting aluminum
14.Weight:1Kg
15.Emitting color: Aviation red
16.Ambient temperature: -40~+70
17.Wind load: 80m/s
18.Protection standard: IP65
Advantages
1.PC material with good impact protection strength, thermal stability, high transmittance.
2.Bird spike against bird drop.
3.International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours.
4.LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
5.About 96% less power than 116W incandescent light.
6.Major maintenance cost saving,Surge protection device inside light.
7.Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8.Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
9.3/4inch installation size and small volume especially being suitable for telecom and flag-pole installation way.
10.There is one switch converting between Flashing mode and Steady-burning mode.
Aviation light : low intensity
Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light. Main Parameter 1.Mode: CS-810/D 2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810 3.Light intensity: 32.5cd(Type B), 10cd(Type A) 4.Flash rate: Steady-burning modeCustomized flashing mode) 5.Working way of two lights: -Two light flashing by Main(duty)-standby way, Two lights flashing at the same time -Two light working by Main(duty)-standby way, Two lights working at the same time.(Steady-burning mode, two ways) 6.Light source: LED 7.Service life of LED: 100,000hours 8.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V) 9.Power consumption: 3W 10.Overall size(mm): 295 by 130 by 337 11.Installation size: 78 by 78 by 9 12. Vertical degree: 10° 13. Horizontal degree: 360° 14. Material: -Housing: PC -Base: die casting aluminum 15.Weight: 2Kg 16.Emitting color: Aviation red 17.Ambient temperature: -40~+70 18.Wind load: 80m/s 19. Protection standard: IP65
Aviation light : medium intensity Instapower has developed its led based models in order to reduce power consumption to a great extent. We are able meet all the requirements and conform to the specifications defined by our clients. Our medium intensity neither require any replacement or any maintenance. They are optimised for solar based, stand-alone applications. They can easily be installed in remote areas where there is no manpower and electricity, hence, saving huge cost. This is specially designed to give a working life of 100, 000 hours and coupled with the advantage of very low power consumption. Medium intensity obstacle lights are required to be installed at buildings, which are more than 100 meters above the ground level. Our medium intensity light is designed to give a working life of 100, 000 hours coupled with the advantages of lesser power consumption. In the unlikely event of any malfunction or problem, the unit is provided with an in-built, audio-visual alarm system to warn the maintenance team. Use of quality components and sophisticated technology reduce chances of maintenance and replacement. Low power consumption, which leads to huge savings on electricity bills. Smps redundant parallel power supply ensures improved product life. Provided with rotating mechanism. Special rugged japanese motor for 360ª illumination. Optimized for solar based, stand-alone applications. Superior quality. We at instapower employ leds & other quality components manufactured by global market leaders and follow all quality checking procedures during different stage of production
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, rice
Main Parameter 1.Mode: CS-856 2.Standard: ICAO (Aerodromes Annex 14) High-intensity Type A , FAA L-856 3.Light intensity: -2,000cd (Night) -20,000cd (Twilight) -200,000cd(Daytime) 4.Flash rate: 40 to 60 times/minute 5.Light source: LED 6.Service life of LED: 100,000hours 7.Operating voltage: AC230V 8.Power consumption: 65W 9.Overall size(mm): 500mm286mm260 10.Installation size(mm):198mm225mmM12 11.Vertical degree: 3°~7° 12.Horizontal degree: 90°~120° 13. Material: -Housing: PC -Base: die casting aluminum 14.Weight: 12Kg 15.Emitting color: White 16.Ambient temperature: -40~+60 17.Wind load: 80m/s 18.Protection standard: IP65
Main Parameter 1.Mode: CS-864/B 2.Standard: ICAO (Aerodromes Annex 14) Medium-intensity Type B and FAA L-864 3.Light intensity: 2,000cd 25% 4.Flash rate: Flashing mode 5.Light source: LED 6.Service life of LED: 100,000hours 7.Operating voltage: AC220V (Customized AC120V,DC48V,DC24V,DC12V) 8.Power consumption: 20W 9.Overall size(mm): 215 by 215 by 225 10.Installation size(mm): 115 by 115 by M10 11.Vertical degree: 3° 12.Horizontal degree: 360° 13. Material: -Housing: PC -Base: die casting aluminum 14.Weight: 2.5Kg 15.Emitting color: Aviation red 16.Ambient temperature: -40~+60 17.Wind load: 80m/s 18.Protection standard: IP65
Hoi An lanterns are product that contain many quintessence made by skilled craftsmans. The frame of the lantern is made from old age bamboo, soaked in salt water for ten days to fight termites, creating certainty. The fabric chosen to be a lamp is usually a silk or non-glossy fabric that has a high elasticity so that when the tension is not torn, it can withstand weather changes when used outdoors.