Self Leveling Mortar Shsm68

SH 300 will form a high-strength abrasion and chemical resistant, self-leveling mortar. Because it is based on Portland cement and latex polymers, and does not depend on gypsum, it may be used indoors or outdoors. SH 300 flows out to produce a smooth resurfacing or leveling compound for structurally sound existing slabs.

Description: VFLOOR1 is a single component Cementitious Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦ It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles. Layer-thickness 2-10mm Can be pumped Standard primers give excellent bonding to the VFLOOR1 products Product name VFLOOR1 Compressive strength >40 Mpa, 28 days later Flexural strength >8 Mpa, 28 days later Application temperature 5-30 degree Mixing ratio 20kgs powder + 5.2kgs Liquid Product name PRIMER Mixing ratio 2kgs Primer + 2L water + 4kgs cement Feature & Benefits: - Single component, just mix with water - Good adhesion to primed substrates - Good flow, self smoothing - Rapid setting and early strength - Easy and quick to lay Mixing: Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture. - VFLOOR1 20kgs barrel required approximately 5.2 litres of clean water The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing. Ready for foot traffic after approx. 3 hours. Drying time: Prevent draughts across the floor to avoid localized premature drying At ambient temperature, VFLOOR1 will appear to be dry after approximately 24 hours. Floor laying may commence after 48 hours. Coverage: - At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2 Shelf Life: 9 months.

Product formation�? Two component paint of epoxy resin, pigments, fillers, additives and active diluent. Product features: . High adhesion strength with the primary . Seamless, Low hardening shrinkage, no easy to crack . Easy to clean, do not gather dust and bacteria . Environmental protection non-toxic . Wear resistance, can withstand the forklift, carts and other tools�?? long time rolling . Anti permeability, corrosion resistance, Oil resistance and water resistance . Easy to construction and good decoration, the surface is smooth and color bright . Also can be made for static conductive epoxy floor paint Using Mainly used in electronics, electrical appliances, hardware, machinery factory, school, hospital, chemical, pharmaceutical, laboratory, food factory, textile factory, printing factory, chemical plant, computer room, supermarket, parking lot, all kinds of electrical control room, command center And so on the ground has a very high demand for the industry. Packing Paint: 16 kg/bucket Curing agent: 4 kg/bucket

Epoxy Floor Coating (interior Floor Coat) Covered/underground Car Park/garage Warehouse Coatings Factory/food Plant Coating Industrial Floor Coating Self Levelling Floor Coat Hygienic Coating (anti-bacterial)

Supplier: Paint, varnish, industrial coatings, flooring epoxy, epoxy primer, epoxy self leveling, nitrocellulose paints, heat resistant coatings, wood coatings, pu coatings, enamels, emulsions
Buyer: Titanium dioxide, pigments, additives and resins

(1) FEATURES : Use Wall Pillar For Wall Tile, Ceramic Tile, Stone Floor And Wall Construction When Laying Leveling And Left Seam Tools. (2) It's Great tool for floor/wall setting. The system can ensure the flatness between tiles and avoid movement during mortar setting. You can quickly and easily tiling achieve a smooth level surface using the system. It's made of High-toughness PVC material, clear & tidy gears improve the tile surface level and prevent the tiles from moving. (3) tile leveling system can use for Living room, bathroom, office floor/wall tile project, greatly improving the speed of paving tiles, and reduce the difficulty of paving tiles.

DESCRIPTION Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed. ADVANTAGES * Easy and ready to use, by water addition only. * Fast working * Practical and high adhesive power * Floor would be flat/ level in a second APPLICATION CA-010 is used as a floor screed material surface that canâ??t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.

Scope of application: 1. Electron, appliance, ironware, machine factory 2. Chemical, medicine factory, lab 3. Food, textile, supermarket, parking lot. Features: Dust-proof, waterproof, mold-proof, chemical resistant, wear-resistant, strong adhesion, smooth and seamless, simple construction, easy to clear and maintain. Construction technology: 1. Waterproof treatment: first floor needs well done waterproof; 2. Basic ground treatment: polish, fix and clean according the basic ground condition; 3. Epoxy primer: use strong Permeability and adhesion epoxy primer roll-coating one time, strengthen surface adhesion; 4. Epoxy putty: construction several times according practical demand, up to smooth without holes, mark of Batch cutter and sand polish; 5. Epoxy topcoat: use epoxy topcoat or slip-resistant topcoat roll-painting two times, when finished the floor is smooth and clean, color average and no hollowing. 25kg/drum.