Ym-Ck5112Epro Cnc Vertical Lathe

YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.

YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.

YM-CK5116Epro CNC vertical lathes 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�?? 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�?? 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent e lectric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed  JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available. 14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.

YM-CK5126Epro CNC Single Column vertical lathe 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�?? 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�?? 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed  JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available. 14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.

YM-CKG160 CNC high-speed vertical turning lathe 1. This system machine tool applies to cutting such tools as cemented carbide and ceramics to make rough, semi-fine processing and fine processing for internal and external cylindrical surface, conical surface, end face, cutting groove, screw and surface of revolution, etc. of ferrous metal, non ferrous metal and some nonmetal parts. 2. There are three specifications available such as high-speed type, standard type, and heavy-load type. 3. High-speed cutting: the maximum cutting speed is up to 2000m/min. The fast moving speed of the tool holder (horizontal and vertical) is up to 12m/min. 4. The main transmission is driven by AC main shaft servo motor. Two-step variable speed uses the imported ZF gearbox. High-speed rotary work pieces are carried out with static and dynamic balance. High-precision transmission gears and gear grinding process are used to realize high transmission efficiency, low noise and reliable and stable operation under high speed. 5. The feed system is driven by AC servo motor and the motor carries out direct linkage with ball screw by soft coupling to realize non-transmission clearance with high-precision operation. 6. The column is in type of thermal symmetry and it is installed in the base of working platform. By the calculation of finite elements of the com puter, effective vibration isolation measures are adopted with the features of high stiffness and high anti-vibration capacity. 7. The working platform is in type of thermal symmetry and the main shaft adopts double short and circular column roller bearing center with high-precision and adjustable radial clearance while the axial direction utilizes large thrust sphere bearing with high-precision as the rolling guide and then the cooling device of oil temperature is equipped with, thus, the working platform is featured with high rotation precision, large bearing capacity and small thermal deformation. 8. The feed motion of tool holder and ram adopts straight line bidirectional roller rolling guide to make the motion of tool holder own stable motion, high transmission efficiency and excellent precision retentively. 9. CNC system adopts Siemens or FANUC system or other systems appointed by the user. 10. The machine tool is equipped with chip removal device and semi-closed hood. 11. Upon the demands of the users, tool magazine, butted-knife installation within the machine, boring-milling function, function of indexing and feed of working platform, grinding function, left vertical tool holder as well as full-closed-loop control etc. can be offered. 12. Therefore, the electric components, hydraulic components and the functional parts all select international famous high-grade brand.