YM-CK5126Epro CNC Single Column vertical lathe
1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�??
2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�??
3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products.
4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years.
5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration.
6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support.
7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly.
8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque.
9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed
 JB/T9934.2-1999 technical specification of CNC vertical lathe
10. Owning constant line speed turning, cutting thread and other functions
11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision.
12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability.
13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available.
14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
CK5126E CNC Single Column Vertical Lathe 1. Super-high performance-price ratio and reasonable price. 2. Suspended button station is adopted and the electric cabinet and lathe body are integrated. 3. Hardening beam, hardening T type sliding ram (square sliding ram is optional), together with the sticking plastic guide are adopted. 4. Grade 16 machinery variable speed is taken as the standard configuration, and five-angle tool carrier or square knife station is designed. 5. Siemens 802C system (other systems are optional) 6. Closed protection of beam and automatic lubricating of different lubrication parts. 7. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 8. Optional Features: Frequency conversion stepless speed regulation, power-driven tool post and heighten lathe body etc. 9. One-year quality assurance, perfect after-sale service.
We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.
YM-CK5112Epro CNC vertical lathe 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�?? 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�?? 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed  JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available. 14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
YM-CK5116Epro CNC vertical lathes 1. The product is in Pro version with professional design, being an improved product with a huge market sales volume. CK5112Epro and CK5116Epro adopt the identical modules (identical beam section, beam slide base, rotary slide base, ram, servo motor and servo driver) which are extremely suitable for heavy-load cutting�?? 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid.�?? 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the square ram adopts ductile iron material (QT600) while the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent e lectric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed  JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service and 2-year quality assurance service are available. 14. Optional parts: Germany Mecano button station, constant flow hydrostatic guideway, oil temperature icebox, constant temperature refrigerator, grating closed loop, heighten lathe body, lengthen ram etc.
Ethanol alcohol distillation column 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.  Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol . It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements. The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements. The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.     a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .  It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.
YM-CK5112Epro Semi-closed CNC Vertical Lathe 1. This machine tool is based on the original CK5116Epro increased semi-closed protection, scraps discharge, scraps discharge car, pump water workpiece cooling, oil temperature refrigeration, Germany Mecano button station etc. features, has appearance generous and high grade. 2. The working platform owns the function of waterproof and it is not necessary to worry that cutting fluid infiltrates into it. The design of square shaped working platform facilitates the collection of cutting fluid. 3. Siemens 802DSL system (user can appoint other system) is adopted; servo motor and servo driver all utilize Siemens products. 4. Beam guiding surface and T model ram guideway is conducted with supersonic frequency quenching treatment (higher than HRC50) with the characteristics of durable service; the sliding surface is sticking with the soft plastics belt, which can prolong more the overhauling period for over 10 years. 5. The independent electric cabinet is equipped with air conditioner for refrigerating, which prolongs the reliability and service life of the electric parts significantly, facilitates repair and maintenance, and is free from the influence of machine vibration. 6. P3 high-precision lead screw produced by Nanjing Process or Taiwan HIWIN (P1 is the highest and P6 is the lowest degree), and imported bearing support. 7. The beam is protected by the white steel, and all the lubrication parts are supplied with certain amount of oil by the automatic lubricating pumps regularly. 8. Four-grade machine variable speed + motor stepless variable speed, wide range of constant power and large torque. Four station electric tool post, automatic exchange tool, convenient and practical. 9. JB/T9934.1-1999 precision inspection of CNC vertical lathe is performed JB/T9934.2-1999 technical specification of CNC vertical lathe 10. Owning constant line speed turning, cutting thread and other functions 11. High-precision transmission gear (6 grades) and high-precision spiral bevel gear (6 grades) with low noise and high rotary precision. 12. All the castings are made of HT300 grey cast iron (ram is made of ductile iron) which is treated with artificial heat ageing, high-quality processing and improved assembly process. All the functional parts and electric parts are in high quality with high reliability. 13. Complete fitting configuration allows the user to put into operation only by preparing cutting tool and measuring tool. The improved after-sales service (Before-sale, after-sale, install, commissioning, training and guarantee) and 2-year quality assurance service are available. 14. Optional parts: Constant flow hydrostatic guideway, grating closed loop, heighten lathe body, lengthen ram etc.
CNC Double Column Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Gra de 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc. More CNC Double Column Vertical Lathe: China Vertical Lathe.
