Model: RTU5023
Name: GSM SMS Temperature Humidity Alarm
Keyword:
GSM Temperature Alarm, SMS Temperature Alarm, Temperature SMS Alarm, Temperature Alarm, Remote Temperature Monitoring, Remote Temperature Alert.Temperature Monitor, Temperature Sensor with SMS Alarm, SMS Temperature Monitoring.Humidity Alarm, Humidity SMS Notification, GSM Environment Alarm.
The GSM SMS Environment Alarm is special for remotely monitoring onsite temperature, humidity, power status through wireless GSM Network. When the temperature, humidity, power voltage exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately.
Just dial from Authorized User number, the GSM Environment Alarm will reject at the first ??Ring?�, no communication cost, and then return the current temperature, humidity, power status or voltage. Moreover, it can report onsite environment interval or daily.
The GSM Environment Alarm can be used for solar power monitoring, DC power voltage monitoring, temperature monitoring, humidity monitoring, Class Room, Public Room, Waiting Room, Hospital, Stations, Fresh Food Warehouse, Office, Meeting Room, Laboratory, Library and anywhere that need monitoring temperature or control temperature in expected range.
Mainly Features :
1. Can be operated from anywhere, no distance limitation;
2. No call charges for inquiry. the GSM Environment Alarm rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring';
3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage);
4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence;
5.One Temperature & Humidity sensor input, measures temperatures from -40-80°C,0.5°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%;
6.External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers;
7.Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost;
8.Timer Report??Can setup every x hours automatically send its status/Value to the authorized numbers;
9.Support remotely read historic data via SMS;
10.Rechargeable Backup Battery inside can last 8hours;
11.Secure - Using caller ID and password for identification, unknown callers are ignored;
12.Programmable by SMS Commands or APPs with password protection;
13.Based on GSM Network, applied to many applications.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Model: S150 Name: GSM SMS Controller Alarm Keyword: GSM SMS Controller, GSM SMS Alarm, , GSM RTU, GSM SMS RTU, GSM Remote Controller, GSM SMS Remote, GSM Relay, GSM Switch. GSM Pump Monitoring, GSM Water Level Monitoring, SMS Alert, SMS Alarm Unit. The GSM SMS Controller alarm s are special for remote switch on/off machine, equipments, and also it supports digital inputs for different detectors like water level detectors, PIR motion detectors and so on. One of the advantages of them is when the inputs recovery can alert by SMS, and with one interlock Relay output, one SMS Command switch on/off relay output. When alarm occurrence, will send definition SMS text and dial the user mobile phones . 1.GSM Frequency: 850/900/1800/1900Mhz; 2.1 Independent Output Relay (240VAC3A) can be switched ON/OFF by sending a SMS text; 3.1 Alarm-Link Output Relay (240VAC3A) can be switch on 0-120minutes if controller unit triggered; 4. 2/4/8 Alarm logic digital inputs, NC or NO and EOL is optional; 5.3 SMS Alert numbers and 5 Alarm dial Telephone numbers can accept to the alarm message; 6.Two-way voice communication by external microphone and speaker; 7.Supports armed, disarmed, inquiry status, switch on/off Output Relay by SMS Commands; 8.Password protected, prevents unauthorized user; 9.Can be set up and programmed from PC Configurator by USB cable; 10.Time stamped alarm messages. 11.Backup rechargeable battery inside, can work for 24hours when AC Power goes off. 12.Can be operated from anywhere, no distance limit; 13.Based on GSM Network, applied to many applications.
GSM Home Alarm Systems; GSM Medical Alarm; GSM SMS Controller Alarms; GSM GPRS data Logger; GSM Telemetry Systems (M2M); GSM Gate Opener. GSM SMS Controller Alarm GSM SMS Control Alarm GSM Remote Control Alarm SMS Remote Control Alarm GSM SMS Controller Alarm S150 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM SMS Controller can be used in places which require turning ON/OFF your system, machines, equipments remotely with a SMS text from your mobile phone and protect your assets. GSM SMS Controller Alarm S150 has 8 digital inputs, when any one of the inputs triggered, will start the siren or switch on the light automatically. in the meanwhile, the GSM SMS Controller will send SMS Alert the to owners immediately. This is very useful if you need protect your assets with low cost solution. Mainly Features of GSM SMS Controller Alarm S150: 1. 1 relay output (240VAC/3A) can be switched ON/OFF by sending a SMS text; 2. 1 relay output (240VAC/3A) can be switch on 0-120minutes if any inputs triggered; 3. 8 Alarm logic inputs, NC or NO and EOL is optional; 4. 3 SMS Alert numbers and 5 auto-dial numbers can accept to the alarm message; 5. Two-way voice communication by external microphone and speaker; 6. Supports armed, disarmed, inquiry status, switch on or off relay output by SMS Commands; 7. Password protected, prevents unauthorized user; 8. Can be set up and programmed from PC Programmer by USB cable; 9. Time stamped alarm messages; 10. Backup rechargeable battery inside, can work for 24hours when power off; 11. Can be operated from anywhere, no distance limit; 12. Based on GSM Network, applied to many applications. Standard Package list of GSM SMS Controller Alarm S150: GSM Controller X 1 Power supply adapter X 1 (12V 1.5A) USB Cable X 1 CD (Pc programmer tool) X 1 GSM Antenna X 1 GSM Home Alarm Systems GSM Senior Safety Guarder GSM Gate Opener& GSM IR Controller GSM SMS Controller&Alarms GPRS Power Facility Burglarproof Alarm GPRS Temperature Loggers GPRS Telemetry Data Logger(GPRS RTU) GPRS Data Terminals(GPRS DTU) 3G Video Alarm Systems Detectors,Alarm Accessories Web Based Monitoring Software. GSM Controller X 1 Power supply adapter X 1 (12V 1.5A) USB Cable X 1 CD (Pc programmer tool) X 1 GSM Antenna X 1
Model:S271 Name: GSM 3G M2M RTU (4D+I4AI+4DO+1TH+1USB) The GSM 3G M2M RTU is a multi I/O port remote terminal unit. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. Large internal memory for save 1000 historical data, USB port for configuration and upgrade firmware; 4. 4 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 4 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 9. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 10. Supports remotely restart the RTU, and configure it by SMS commands remotely; 11. Supports over voltage protection and phase-reversal protection; 12. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 14. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
1. Smart touch keypad with 4 line message LCD display 2. Quad-band GSM communication, works with SIM card 3. Calender, five personal emergency phone numbers 4. One central monitoring station phone number 5. Alarm notification via phone call or SMS 6. Built-in speaker and microphone 7. Remote two-way intercom 8. Extra SMS phone number for system''s status 9. Alarm memo, entry delay, exit delay 10. Hybrid alarm, 30 wireless zones, 4 hardwired zones 11. Advanced zone attribute, user-friendly zone names 12. Temperature display and relay signal output 13. Support wireless LCD/LED keypad and wireless siren 14. Support user code and installer code 15. 100 alarm log 16. SMS alert, when system: Arm/Disarmed, sensor''s low battery, AC power failure, phone line disconnect 17. Reset factory design 18. Built-in siren 19. Alarm communication via ADEMCO Contact ID protocol 20. Backup rechargeable battery, last more than 24 hours 21. Work with IP camera Color box:19*14.5*9cm, 22units/CTN
wireless/wire GSM SMS intelligent home alarm system Main Features: 1. Voice guide, the standard language is English. can be customized your local luanguage(Russian, Spanish, etc) 2. Indicate lights show GSM signal status to find the best control panel place position. 3. control panel is compatible 1527&2262 chip detectors(2262 chip remote controller, 1527 chip PIR, etc) in the same zone. 4. SMS program without any keypad. 5. Anti attack zone, the system auto dial and sms alert to preset phone numbers without active the siren. 6. VIP zone, arm/disarm VIP zone independently. 7. Record 10 seconds voice message. The voice message can be the alarm address, etc 8. Auto-dial six phone numbers and send text messages when system is activated. 9. Listen in what happens in the spot remotely. 10. Two way intercom function remotely via phone. 11. customize RS485(optional). 12. SMS control switch on/off. 13. SMS check the system Arm/Disarm status. 14. Edit each zone different name independently via SMS. Can be your local language. 15. 20 intelligent wireless zones, which can code 160pcs wireless detectors in total. And the quantity of wireless detectors coded to each zone is unlimited. 16. 4 intelligent wired zones automatically recognize the wired detectors. 17. Each zone include the wired zones can set be the independent zone: Internal zone, the whole defensive zone, 24-hour emergency zone, Delay zone, Closed zone, VIP zone(arm/disarm independently, usually used for important room or things such as safebox, etc) 18. Use telephone or mobile phone remote control the system via input password to listen in, intercom, arm, disarm, switch on/off, etc. 19. Four-button wireless remote controller to Away arm, Home arm, Disarm, Emergency help. Users also can use our wireless intelligent keypad to control the system if the family has members or do not like taking remote controllers. 20. Build in one output relay, which can set be alarm linkage(can connect with another siren or siren with flash/strobe). The relay also can control home appliance: lights, airconditioner, cooker, etc. 21. Wired zone4 port can connect with wireless siren or horn. 22. SMS program. Users send their sms commands to the control panel then the panel will confirm the password and save the commands automatically. The LED light show you the commands whether are correct. If not, need try again. 23. Delay arm function: allow people have enough time to go out without activating the system. 24. Delay alarm function: allow people have enough time to enter the house without activating the system. 25. SMS informs users when electricity is off/on. 26. SMS informs users when the control panel is low voltage. 27. the control panel build in recharageable battery, so it will still work when electricity is off. 28. the control panel can support several sirens. 29. GSM band 900/1800MHz and 850/900/1800/1900MHz are available. Technical parameters: GSM control panel: Operating voltage: DC12V Average power: AC/DC Wireless receiving sensitivity: -108db Available wireless Frequency: 315/433MHz Working Condition: Temperature ¨C25¡æ¡«+ 45¡æ Humidity ¡Ü 90%Rh Capacity for Wireless Device: 160pcs Standard Package list of the GSM Alarm System: Control panel X1 Remote contoller X2 Wireless PIR Motion Sensor X1 Wireless Door magnetic Sensor X1 Wired Mini Siren X1 GSM Antenna X1 AC/DC Adapter X1 Voice Speaker X1 User Manual X1 The users can add other sensors such as wireless password keypad, PIR, siren with flash/strobe, etc. 1.5kg per set 10 sets per carton Carton size:34cmx34cmx54cm.
Model: s150 Name: gsm gprs 3g 4g sms controller alarm Keyword: Gsm gprs 3g 4g sms controller, gsm gprs 3g 4g sms alarm, gsm gprs 3g 4g rtu, gsm gprs 3g 4g sms rtu, gsm gprs 3g 4g remote controller, gsm gprs 3g 4g sms remote, gsm gprs 3g 4g relay, gsm gprs 3g 4g switch. Gsm gprs 3g 4g pump monitoring. The gsm 3g 4g sms controller alarm is special for remote switch on/off machine, equipments, and also it supports digital inputs for different detectors like water level detectors, pir motion detectors and so on. One of the advantages of them is when the inputs recovery can alert by sms, and with one interlock relay output, one sms command switch on/off relay output. When alarm occurrence, will send definition sms text and dial the user mobile phones. Mainly features: 1.Gsm frequency: 850/900/1800/1900mhz; 2.1 independent output relay (240vac3a) can be switched on/off by sending a sms text; 3.1 alarm-link output relay (240vac3a) can be switch on 0-120minutes if controller unit triggered; 4. 2/4/8 alarm logic digital inputs, nc or no and eol is optional; 5.3 sms alert numbers and 5 alarm dial telephone numbers can accept to the alarm message; 6.Two-way voice communication by external microphone and speaker; 7.Supports armed, disarmed, inquiry status, switch on/off output relay by sms commands; 8.Password protected, prevents unauthorized user; 9.Can be set up and programmed from pc configurator by usb cable; 10.Time stamped alarm messages. 11.Backup rechargeable battery inside, can work for 24hours when ac power goes off. 12.Can be operated from anywhere, no distance limit; 13.Based on gsm network, applied to many applications.
Frequency: 2g:gsm900/1800mhz, 3g: 900/2100mhz umts (default) 2g:gsm850/900/1800/1900mhz, 3g:850/1900mhz umts (optional) S260w s261w: the w is an identify letter of s260 s261, all of these models with the same ce certificates. 1)input channel: 4*ds18b20 temperature input 2)output: 1 relay, nc/no contacts, 7a/125v ac, 5a/250vac, 20a/14vdc 3)temperature range: -55~+125c degree(¡§c67f degree to +257f degree) 4)accuracy: 0.5~1c degree from ¡§c10c degree to +85c degree 5)power supply : 9~24vdc 2a 6)power consumption: 12v input max.50ma/average 7)sim card supporting: 3v sim card 8)gsm antenna: 50 ohm sma antenna interface 9)backup battery: 3.7v/1200mah 10)relative humidity: 90%(condensation free) 11)installation: 35mm din rail (s260w) Ip67 enclosure (s261w) 12)connecting wires: 2.5mm 13)exterior dimensions: 145*90*41mm (s260w) 180*140*60mm (s261w) 14)net weight: 250g Main unit x1 2)100~240vac/12vdc 2a power adaptor x1 3)ds18b20 temperature troide x2 4)antenna x1 5)gps antenna x1 (*for gps model optional) x1 6)user manual & pc software cd x1 Packing size: 235 x 225 x 65mm Gross weight: 0.75kg Optional: Gps module Ds18b20 temperature probe with 1/5/10meters wire Ds18b20 temperature probe with anticorrosion packing
The NFS-3030 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in small to medium-sized fire protection systems and provides effective fire detection and alarm notification. The NFS-3030 features a compact design and advanced microprocessor technology, making it easy to install and program. The control panel supports up to 384 points and includes built-in communication options, such as analog dialer and network interfaces, for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, providing versatility and customization for specific fire protection needs. The NFS-3030 is a cost-effective and reliable fire alarm control panel from Notifier.
