Model:S271
Name: GSM 3G M2M RTU (4D+I4AI+4DO+1TH+1USB)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
Mainly Features:
1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system;
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. Large internal memory for save 1000 historical data, USB port for configuration and upgrade firmware;
4. 4 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 4 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
9. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
10. Supports remotely restart the RTU, and configure it by SMS commands remotely;
11. Supports over voltage protection and phase-reversal protection;
12. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
14. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Model: s150 Name: gsm gprs 3g 4g sms controller alarm Keyword: Gsm gprs 3g 4g sms controller, gsm gprs 3g 4g sms alarm, gsm gprs 3g 4g rtu, gsm gprs 3g 4g sms rtu, gsm gprs 3g 4g remote controller, gsm gprs 3g 4g sms remote, gsm gprs 3g 4g relay, gsm gprs 3g 4g switch. Gsm gprs 3g 4g pump monitoring. The gsm 3g 4g sms controller alarm is special for remote switch on/off machine, equipments, and also it supports digital inputs for different detectors like water level detectors, pir motion detectors and so on. One of the advantages of them is when the inputs recovery can alert by sms, and with one interlock relay output, one sms command switch on/off relay output. When alarm occurrence, will send definition sms text and dial the user mobile phones. Mainly features: 1.Gsm frequency: 850/900/1800/1900mhz; 2.1 independent output relay (240vac3a) can be switched on/off by sending a sms text; 3.1 alarm-link output relay (240vac3a) can be switch on 0-120minutes if controller unit triggered; 4. 2/4/8 alarm logic digital inputs, nc or no and eol is optional; 5.3 sms alert numbers and 5 alarm dial telephone numbers can accept to the alarm message; 6.Two-way voice communication by external microphone and speaker; 7.Supports armed, disarmed, inquiry status, switch on/off output relay by sms commands; 8.Password protected, prevents unauthorized user; 9.Can be set up and programmed from pc configurator by usb cable; 10.Time stamped alarm messages. 11.Backup rechargeable battery inside, can work for 24hours when ac power goes off. 12.Can be operated from anywhere, no distance limit; 13.Based on gsm network, applied to many applications.
Model: S150 Name: GSM SMS Controller Alarm Keyword: GSM SMS Controller, GSM SMS Alarm, , GSM RTU, GSM SMS RTU, GSM Remote Controller, GSM SMS Remote, GSM Relay, GSM Switch. GSM Pump Monitoring, GSM Water Level Monitoring, SMS Alert, SMS Alarm Unit. The GSM SMS Controller alarm s are special for remote switch on/off machine, equipments, and also it supports digital inputs for different detectors like water level detectors, PIR motion detectors and so on. One of the advantages of them is when the inputs recovery can alert by SMS, and with one interlock Relay output, one SMS Command switch on/off relay output. When alarm occurrence, will send definition SMS text and dial the user mobile phones . 1.GSM Frequency: 850/900/1800/1900Mhz; 2.1 Independent Output Relay (240VAC3A) can be switched ON/OFF by sending a SMS text; 3.1 Alarm-Link Output Relay (240VAC3A) can be switch on 0-120minutes if controller unit triggered; 4. 2/4/8 Alarm logic digital inputs, NC or NO and EOL is optional; 5.3 SMS Alert numbers and 5 Alarm dial Telephone numbers can accept to the alarm message; 6.Two-way voice communication by external microphone and speaker; 7.Supports armed, disarmed, inquiry status, switch on/off Output Relay by SMS Commands; 8.Password protected, prevents unauthorized user; 9.Can be set up and programmed from PC Configurator by USB cable; 10.Time stamped alarm messages. 11.Backup rechargeable battery inside, can work for 24hours when AC Power goes off. 12.Can be operated from anywhere, no distance limit; 13.Based on GSM Network, applied to many applications.
Model: RTU5023 Name: GSM SMS Temperature Humidity Alarm Keyword: GSM Temperature Alarm, SMS Temperature Alarm, Temperature SMS Alarm, Temperature Alarm, Remote Temperature Monitoring, Remote Temperature Alert.Temperature Monitor, Temperature Sensor with SMS Alarm, SMS Temperature Monitoring.Humidity Alarm, Humidity SMS Notification, GSM Environment Alarm. The GSM SMS Environment Alarm is special for remotely monitoring onsite temperature, humidity, power status through wireless GSM Network. When the temperature, humidity, power voltage exceed high threshold or low threshold value, will send SMS alert to upto 10 preset mobile phone immediately. Just dial from Authorized User number, the GSM Environment Alarm will reject at the first ??Ring?�, no communication cost, and then return the current temperature, humidity, power status or voltage. Moreover, it can report onsite environment interval or daily. The GSM Environment Alarm can be used for solar power monitoring, DC power voltage monitoring, temperature monitoring, humidity monitoring, Class Room, Public Room, Waiting Room, Hospital, Stations, Fresh Food Warehouse, Office, Meeting Room, Laboratory, Library and anywhere that need monitoring temperature or control temperature in expected range. Mainly Features : 1. Can be operated from anywhere, no distance limitation; 2. No call charges for inquiry. the GSM Environment Alarm rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring'; 3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage); 4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence; 5.One Temperature & Humidity sensor input, measures temperatures from -40-80°C,0.5°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%; 6.External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers; 7.Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost; 8.Timer Report??Can setup every x hours automatically send its status/Value to the authorized numbers; 9.Support remotely read historic data via SMS; 10.Rechargeable Backup Battery inside can last 8hours; 11.Secure - Using caller ID and password for identification, unknown callers are ignored; 12.Programmable by SMS Commands or APPs with password protection; 13.Based on GSM Network, applied to many applications.
GSM Home Alarm Systems; GSM Medical Alarm; GSM SMS Controller Alarms; GSM GPRS data Logger; GSM Telemetry Systems (M2M); GSM Gate Opener. GSM SMS Controller Alarm GSM SMS Control Alarm GSM Remote Control Alarm SMS Remote Control Alarm GSM SMS Controller Alarm S150 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM SMS Controller can be used in places which require turning ON/OFF your system, machines, equipments remotely with a SMS text from your mobile phone and protect your assets. GSM SMS Controller Alarm S150 has 8 digital inputs, when any one of the inputs triggered, will start the siren or switch on the light automatically. in the meanwhile, the GSM SMS Controller will send SMS Alert the to owners immediately. This is very useful if you need protect your assets with low cost solution. Mainly Features of GSM SMS Controller Alarm S150: 1. 1 relay output (240VAC/3A) can be switched ON/OFF by sending a SMS text; 2. 1 relay output (240VAC/3A) can be switch on 0-120minutes if any inputs triggered; 3. 8 Alarm logic inputs, NC or NO and EOL is optional; 4. 3 SMS Alert numbers and 5 auto-dial numbers can accept to the alarm message; 5. Two-way voice communication by external microphone and speaker; 6. Supports armed, disarmed, inquiry status, switch on or off relay output by SMS Commands; 7. Password protected, prevents unauthorized user; 8. Can be set up and programmed from PC Programmer by USB cable; 9. Time stamped alarm messages; 10. Backup rechargeable battery inside, can work for 24hours when power off; 11. Can be operated from anywhere, no distance limit; 12. Based on GSM Network, applied to many applications. Standard Package list of GSM SMS Controller Alarm S150: GSM Controller X 1 Power supply adapter X 1 (12V 1.5A) USB Cable X 1 CD (Pc programmer tool) X 1 GSM Antenna X 1 GSM Home Alarm Systems GSM Senior Safety Guarder GSM Gate Opener& GSM IR Controller GSM SMS Controller&Alarms GPRS Power Facility Burglarproof Alarm GPRS Temperature Loggers GPRS Telemetry Data Logger(GPRS RTU) GPRS Data Terminals(GPRS DTU) 3G Video Alarm Systems Detectors,Alarm Accessories Web Based Monitoring Software. GSM Controller X 1 Power supply adapter X 1 (12V 1.5A) USB Cable X 1 CD (Pc programmer tool) X 1 GSM Antenna X 1
Support 3g/wcdma frequency With 300k pixels cmos sensor. Built in ir red, support wireless video surveillance 24 hours. Built-in pan/tilt, horizontally 270°, vertically 90°, Support sd card(max 32gb) Arm/disarm and emergency alarm by remote controller Excellent wide dynamic function, wdr=100db Control program the system(like set language) by sms commands. Sms, mms, call and video phone automatically while alarming Support magic rotation 88wireless guarding zones, wireless alarm sensors inputs(315mhz or 433mhz) Send sms and call to 10 mobile phones automatically while alarming. Adopts wireless signal transmission, no need to connect to wire and easy for installation. Support motion detecting and video call anywhere and anytime.
Model:W12 Name:Wifi+3G/GSM Camera Alarm W12 W12 Wifi+3G/GSM Camera Alarm adopts advance technology,it combine Wifi Camera and 3G/GSM Alarm as one device.It support both wifi and 3G/GSM,double protection security,should be a new innovation concept for safety and family care! With Wifi,we can use mobile phone or PC check the on-site video anywhere and anytime.Even wifi signal missing,we will also know if family,shop etc. are still safe or not.W12 Wifi+3G/GSM Camera Alarm has the function of two-way voice intercom, alarm, TF card save recording and PC centralized management. 1.SMS/Calling remind even wifi missing,up to 9 authorize no.for alarm. 2.Remote control/APP/SMS to Arm/Disarm,SMS remind optional for arm/disarm. 3.Support mobile video monitoring.The monitoring image quality can be adjusted by mobile network speed. 4.Two-way voice intercom,monitoring voice and video. 5.Support PTZ control. Built-in RS485.The camera can monitoring left and right 355 degrees and up and down 90 degrees. 6.Support infrared night view,viewing up to 10m. 7.Support motion detect. It can control sending email and FTP uploading recording and alarm by sensitivity. 8.Support remote monitoring at anywhere and anytime. 9.Support wireless and real-time alarm. It has 64 wireless zones. 10.Support English, Spanish, Dutch, French, Italian, Polski, Chinese. 11.Support browse with several windows. Remote IE( Win7 IE 360 Firebox Chrome Internet Explorer) checking software,support browse with 16 windows at the same time. 12.Centralized platform to watching. Centralized monitoring software is a professional video monitoring software.It support recording, display multi camera monitoring screen on one platform at the same time. This software also can control one of the camera monitoring,changing recording angle.
Power (W): 20/40/50/60; Power factor: 0,9; Voltage (V): 100-277/120/220-240; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/110/130/140/150; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - Integrated with a PIR sensor/ Light sensor/ Radar Sensor - Smart control: Users can freely adjust the brightness and response time of the lights individually or by group thanks to the built-in sensor and Rang Dong's smart app; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 20/40/50/60; Power factor: 0,9; Voltage (V): 100-277/120/220-240; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/110/130/140/150; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - Integrated with a PIR sensor/ Light sensor/ Radar Sensor - Smart control: Users can freely adjust the brightness and response time of the lights individually or by group thanks to the built-in sensor and Rang Dong's smart app; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;