4"membrane housing
FRP twisted case, durable
The option of thread connection at water outlet: 1/2" 3/4"
Thread connection at fresh water outlet: 1/2"female thread
SS316L halfmoon locking plate: easy operation, safety and reliability
subassembly at head
kind of pressure: 300,1000PSL
length type: 1,2,3,4 core
The design of head connection directly will reduce the quantity of joint used for the connection of
filtering film.
4 INCH frp membrane housings W40S300 Winder frp membrane housing pressure vessels 4" Side Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels 4" Side Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Product Description: -The house part 54m2 (D8.5mxR6.2mx C3.6m) Number of people: 4-6 people Product Specification: Frame part: - American imported abitum sheet roofing. Roofing - Spray form heat insulation, sound insulation. - Zinc iron frame 1.4 cups epoxy paint on Hai Au ship's hull. Picomat floor, plastic wood floor lining. Doors, Aluminum windows and tempered glass. Double-layer curtains for doors and windows. Electrical equipment: The water and electricity system has been built-in, copper pipes, CP. Double led lights, cadivi electric wire bedside reading lights, panasonic sockets. Toilet: - Imported Chilean pine wood paneling. TOTO two-piece toilet with soft-close lid. Lavabo Toto cabinet, Stone top, Mirror. Lavabo Toto faucet. Standing bathtub, tempered glass, Toto shower. Furniture: Master bedroom. Smart bed with 1.6x2m undercarriage, headboard covered with an Cuong laminate wall, mattress cover. - Copper plated bedside cabinets 2 pieces. Wood snail venner wardrobe Small bed room - Bunk. Living room: The kitchen incorporates a smart dining table, with a location for the washing machine. Sofa combined with smart bed, Sofa table.
ProductThermolet outlets BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating4 based on 4 reviews priceStart from 10 USD Owing to our affluent industry experience RFP India has been quite unbeaten in catering to the needs of our wellregarded benefactors by offering Thermostat Outlets Thermostat Outlets tools are being used to put in the required well and are also being designed to put in a lot of varieties of dissimilar length and size sensors and wells The required Thermowell is being held by an exceptional holding hex socket joined to a functioning rod that passes all the way through a sealed well housing This type of device is recognized as the ThermoletTool and when weighed down by means of the required Thermowell is joined to the impermanent valve in a water tight manner RANGE Outlets to 24 in 3000 LBS 6000 LBS 9000 LBS available with NACE MR 0175 Stainless Steel Thermostat Outlets Standard ASTM ASME ASA 182 Grade F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Thermostat Outlets Standard ASTM ASME ASA 182 Grade F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Thermostat Outlets Standard ASTM B247 B361 Grade 2024 6061 6063 6101 7075 Titanium Thermostat Outlets Standard ASTM B381 Grade Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Thermostat Outlets Standard ASTM A 105A694 A350 LF3A350 LF2 Grade F42465256606570 Low Temperature Carbon Steel Thermostat Outlets Standard ASTM A 350 LF2 A350 LF3 Alloy Steel Thermostat Outlets Standard ASTM A182 Grade F1F5F9F11F22F91 Copper Alloy Thermostat Outlets Standard ASTM ASME SB 61 62 151 152 Grade UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Thermostat Outlets Standard ASTM ASME SB 564 160 472 Nickel 200 UNS N02200   Nickel 201 UNS N02201   Monel 400 UNS N04400 Monel K500 UNS N05500   Inconel K600 UNS N06600   Inconel 601 UNS N06601 Inconel 625 UNS N06625   Inconel 800 UNS N08800   Inconel 800H UNS N08810 Inconel 825 UNS N08825   Hastelloy C276 UNS N10276   Alloy 20 UNS N08020 OTHER Hydraulic Fittings   Instrumentation Fittings Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Thermolet SS 310 310S Thermostat Outlets Duplex Steel UNS S31803 Thermostat Outlets Stainless Steel 304 304L Thermostat Outlets Duplex Steel Thermostat Outlets Stainless Steel 316 316L Thermostat Outlets Duplex Steel UNS S32205 Thermostat Outlets Stailess Steel 321 321H Thermostat Outlets Super Duplex UNS S32750 Thermostat Outlets Monel 400 Thermostat Outlets Hastelloy C276 Thermostat Outlets SS Thermostat Outlets Steel Thermostat Outlets Inconel 625 Thermostat Outlets Alloy 20 Thermostat Outlets CuNi 7030 C71500 Thermostat Outlets CuNi 9010 C70600 Thermostat Outlets ASTM A105 Thermostat Outlets
Filter bag is a low cost disposable media with depth-filtration qualities and high solids loading capacity.Felt FIlter Bags areFelt Bag available n polyester, polypropylene, nylon,felts are available.
SAN-MCH Water Flow Rate SAN-MCH Satinless Steel Sanitary cartridge housings have surface finish of mechanical polished, making the housings ideal housings can be disassembl for demanding processes requiring high purity.The ed in all parts eliminating possibility of rtained particles and and making more effective cleaning. The design of clamp closure advantages the housing with convenient operation and quick element change out. Manufactured by 100% stainless steel,the housingare competent to workin a wide range of critical applications.
Products wooden house apart pairs using anti-quake construction which has been tested in our country and has been in the export. Order small wooden house most types of 36m2 minimum orders 4 units, Length of 4 meter.Berat 28 tons Receive unlimited size as needed wooden houses, cabins and gazebo.
The prefabricated house is mainly consist of light steel structure ,wall system and the roof. They are all made of standardized components, and connected by bolts. We can design ,make the prefab house according to the customers specific requirements. 1)The houses can be assembled and disassembled for dozens of times and can be removed 10 times. 2)All the steel components are painted and anti-rust which can be normally used for more than 20 years. 3)The steel structure makes the house resisting heavy wind of 100km/h and 7 grade earthquake. 4)The wall system of color steel sandwich panel has a good fire proof and heat insulation performance. 5)Waterproof design of steel structure. 6)Environment-protection without any building rubbish. 7)The transportation is convenient and one 40HQ container can load about 250m2 house body materials.
The prefabricated house is mainly consist of light steel structure ,wall system and the roof. They are all made of standardized components, and connected by bolts. We can design ,make the prefab house according to the customers specific requirements. 1)The houses can be assembled and disassembled for dozens of times and can be removed 10 times. 2)All the steel components are painted and anti-rust which can be normally used for more than 20 years. 3)The steel structure makes the house resisting heavy wind of 100km/h and 7 grade earthquake. 4)The wall system of color steel sandwich panel has a good fire proof and heat insulation performance. 5)Waterproof design of steel structure. 6)Environment-protection without any building rubbish. 7)The transportation is convenient and one 40HQ container can load about 250m2 house body materials.
