Graphite and ptfe packing description:
1. Style 6200gfo was made from graphite-ptfe compound without lubricant. Very good thermal conductivity. High flexibility and volumetric stability, no embrittlement or ageing. Long life with good operating efficiency. Gentle treatment of shafts.
2.Style 6200 has lubricant , which is the only difference with style 6200gfo.
3.Thermal conductivity of style 6200gfo is better than style 6200's
Graphite and ptfe packing application areas:
1. Graphite and ptfe packing can be used in pumps, agitators mixers and kneader centrifugal pumps , agitators, involving high peripheral speeds and temperatures, where pure ptfe packing fail.
Graphite and ptfe packing application media:
1. Graphite and ptfe packing is suitable for liquid and gaseous, acids, lye, solvents, adhesives, abrasive and crystalline media like sewage, slurries, salt, etc.
Graphite and ptfe packing:
1.Ptfe and graphite is closely woven
2.High heat conductive
3.Helps prevent extrusion problems
Graphite and ptfe packing application data:
Rotary pump
Reciprocating pump Valve
Pressure: bar 25 for 6200;50 for 6200gfo 250 100
Speed: m/s 20 2 2
Ph range 0-14
Temp. -200 to +260
Density: (g/cm Abt. 1.50-1.55 for 6200gfo; 1.65-1.75 for 6200
Size 1/8"-2"
3mm-50mm
WFY-6100 A is a packing with A grade of quality, the yarn with good tensile strength, and excellent thermal conductivity. WFY-6100 B is economical gPTFE packing, braided from normal graphite PTFE yarn. Application: For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators. Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings. Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents. It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
Ptfe graphite packing Interlock braid, using ptfe/graphite yarn and a high temperature break-in lubricant yarn is formed from expanded ptfe in which fine particles of pure graphite have been encapsulated. The resulting packing combines the chemical resistance of ptfe with the heat dissipation characteristics of graphite, thus allowing much higher shaft speeds than conventional ptfe packings. It is chemically inert over the entire 0-14 ph range with these exceptions: molten alkali metals, flourides, aleum, fuming nitric acid, aqua regia, and other strong oxidizing agents. Gh-120 is an excellent general service and corrosive service packing. It is commonly used in pumps, valves, rotating and reciprocating shafts, mixers and agitators, and is especially designed for services involving surface speeds and temperatures higher than those that can be handled by pure ptfe packing. 2kg or 5kg per spool
Description: It is made of expanded PTFE yarns with reinforced corner from continuous aramid filament, a combination of proved top qualities. It has high cross-sectional density and structural strength. This structure enhances the lubricability of aramid fiber and reinforces the strength of the pure PTFE packing. This special combination packing takes a very important role for high pressure piston pump application. It is recommended for piston pump in the universally applicable within the PH range 2-13. It is suitable to be used in Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
TANK LID PACKING is a multi-functional special packing, the core of which is made of special high pressure-resilient elastomeric and which is then wounded with high-temperature resistant fiber and branded with protective corrosion-resistant fiber, and is applicable for seal of important location of oils and chemicals tanks such as manhole, filling hole and protective hole.
Expanded graphite packing, graphite packing with corrosion inhibitor, graphite packing reinforced with nickel wire, reinforced graphite packing with corrosion inhibitor, graphite packing with ptfe impregnation, graphite packing with carbon fiber corners, graphite packing with ptfe corners, graphite packing reinforced with nickel wire& wrappe mesh, die-formed graphite ring, reinforced die-formed graphite ring, die-formed graphite ring with corrosion inhibitor, reinforced die-formed graphite ring with corrosion inhibitor
Supplier: Seals, sealings, gland packing, graphite packing, kevlar packing, PTFE packing, ceramic fiber products, fiberglass products, glass fiber fabric, graphite products, tank container accessories, gaskets, rubber products
Supplier: Compression packing, graphite packing, agamid packing, PTFE joint sealant, graphite sheet, gasket, cold lamination film, canvas, backlit PET film
Supplier: Caf gasket sheets and gland packings non asbestos gasket sheets ptfe tapes, rods, sheets packings aramid, ramie, graphite, ptfe packings ceramic fibre, glass fibre braided rope, cloth tape blankets high temperature insulation materials marine equipment, stores and spares
Buyer: Ptfe, aramid graphite gland packings, and sealing materials ceramic fibre braided rope cloth tape insulation materials marine equipment, spares, stores as per issa , impa pneumatic tools, deck scalers, personal safety items, marine safety products, rigging materials, fire fighting and life saving products
Graphite PTFE Packing with Oil PTFE Packing Carbon Fibre Packing Cotton greased packing Cotton Square packing Lubricated Asbestos Rubber or Oil Packing (with brass or not) Flexible Graphite Packing Kevlar Fiber Packing Blending Fiber Packing of P.T.F.E. with Carbon Fiber Asbestos PTFE Packing with oil Asbestos PTFE Packing Welcome your inquire. as order
