Ptfe graphite packing
Interlock braid, using ptfe/graphite yarn and a high temperature break-in lubricant yarn is formed from expanded ptfe in which fine particles of pure graphite have been encapsulated. The resulting packing combines the chemical resistance of ptfe with the heat dissipation characteristics of graphite, thus allowing much higher shaft speeds than conventional ptfe packings.
It is chemically inert over the entire 0-14 ph range with these exceptions: molten alkali metals, flourides, aleum, fuming nitric acid, aqua regia, and other strong oxidizing agents. Gh-120 is an excellent general service and corrosive service packing. It is commonly used in pumps, valves, rotating and reciprocating shafts, mixers and agitators, and is especially designed for services involving surface speeds and temperatures higher than those that can be handled by pure ptfe packing.
2kg or 5kg per spool
WFY-6100 A is a packing with A grade of quality, the yarn with good tensile strength, and excellent thermal conductivity. WFY-6100 B is economical gPTFE packing, braided from normal graphite PTFE yarn. Application: For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators. Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings. Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents. It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
Graphite and ptfe packing description: 1. Style 6200gfo was made from graphite-ptfe compound without lubricant. Very good thermal conductivity. High flexibility and volumetric stability, no embrittlement or ageing. Long life with good operating efficiency. Gentle treatment of shafts. 2.Style 6200 has lubricant , which is the only difference with style 6200gfo. 3.Thermal conductivity of style 6200gfo is better than style 6200's Graphite and ptfe packing application areas: 1. Graphite and ptfe packing can be used in pumps, agitators mixers and kneader centrifugal pumps , agitators, involving high peripheral speeds and temperatures, where pure ptfe packing fail. Graphite and ptfe packing application media: 1. Graphite and ptfe packing is suitable for liquid and gaseous, acids, lye, solvents, adhesives, abrasive and crystalline media like sewage, slurries, salt, etc. Graphite and ptfe packing: 1.Ptfe and graphite is closely woven 2.High heat conductive 3.Helps prevent extrusion problems Graphite and ptfe packing application data: Rotary pump Reciprocating pump Valve Pressure: bar 25 for 6200;50 for 6200gfo 250 100 Speed: m/s 20 2 2 Ph range 0-14 Temp. -200 to +260 Density: (g/cm Abt. 1.50-1.55 for 6200gfo; 1.65-1.75 for 6200 Size 1/8"-2" 3mm-50mm
Description: It is made of expanded PTFE yarns with reinforced corner from continuous aramid filament, a combination of proved top qualities. It has high cross-sectional density and structural strength. This structure enhances the lubricability of aramid fiber and reinforces the strength of the pure PTFE packing. This special combination packing takes a very important role for high pressure piston pump application. It is recommended for piston pump in the universally applicable within the PH range 2-13. It is suitable to be used in Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
Expanded graphite packing, graphite packing with corrosion inhibitor, graphite packing reinforced with nickel wire, reinforced graphite packing with corrosion inhibitor, graphite packing with ptfe impregnation, graphite packing with carbon fiber corners, graphite packing with ptfe corners, graphite packing reinforced with nickel wire& wrappe mesh, die-formed graphite ring, reinforced die-formed graphite ring, die-formed graphite ring with corrosion inhibitor, reinforced die-formed graphite ring with corrosion inhibitor
Supplier: Caf gasket sheets and gland packings non asbestos gasket sheets ptfe tapes, rods, sheets packings aramid, ramie, graphite, ptfe packings ceramic fibre, glass fibre braided rope, cloth tape blankets high temperature insulation materials marine equipment, stores and spares
Buyer: Ptfe, aramid graphite gland packings, and sealing materials ceramic fibre braided rope cloth tape insulation materials marine equipment, spares, stores as per issa , impa pneumatic tools, deck scalers, personal safety items, marine safety products, rigging materials, fire fighting and life saving products
Graphite PTFE Packing with Oil PTFE Packing Carbon Fibre Packing Cotton greased packing Cotton Square packing Lubricated Asbestos Rubber or Oil Packing (with brass or not) Flexible Graphite Packing Kevlar Fiber Packing Blending Fiber Packing of P.T.F.E. with Carbon Fiber Asbestos PTFE Packing with oil Asbestos PTFE Packing Welcome your inquire. as order
PTFE packing It is a interlock braided packing manufactured from pure ptfe yarns pretreated with ptfe dispersion, plus a break-in lubricant to reduce the coefficient of friction. This is a dimensionally stable packing, yet relatively soft and pliable, which has excellent lubricating and running characteristics. It handles all acids, alkalis, and most chemicals, with the exception of molten alkali metals. It is suited for high speed rotary shaft service and is also commonly used on reciprocating pumps, mixers, agitators, and reactors. 2kg or 5kg per spool
Ptfe packing - pure ptfe packing Material: 100% ptfe yarn, without theptfe packing use of additional lubricants or break-in oils. Fast and simple to install, with minimum maintenance requirements. Application areas: Style aidmer76-029 ptfe packing can be used in centrifugal and rotary shafts, reciprocating applications, and valve stems, sliders, mixers, vessels and pumps, power industry etc Application media: Style aidmer76-029ptfe packing is suitable for pharmaceutical and food applications, potable water, solvents, oils, gases, effluents, oxygen etc. 5kgs packed in paper reel, one reel packed in inner box , four boxes packed in outer carton
Spiral Wound Gasket (SWG) consists of a thin metallic strip and a soft non-metallic filler that are simultaneously wound on a rotating mandrel. The metal hoop is pre-formed with a V or W shaped profile, which allows the gasket to act as a spring between the flanges. Further, the hoop provides the basic structural element for the gasket while the non-metal filler material seals small imperfections on the flange surfaces. Depend on its excellent compression resilient, ití»s suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipes, valve, pumps etc. They are available in all standard the flanges of sizes, e.g. ANSI ú¼API ú¼DINú¼JISú¼JPIú¼BS etc. (Pressureí_25Mpa) Style Construction Flange Hoop material Filler Inner & outer material Size (mm) Thickness (mm) Material Code V W 6000 Basic type Tongue and Groove 304(L),316(L) Nickel Mon400 Inconel etc. Asbestos Graphite PTFE Mica Ceramic ASB FG PTFE MICA CER Carbon steel 304(L)íó321 316(L)íóTa Nickel,Mon400 Inconel etc. ª+16~3000 3.2 4.5 6.5 4.8 5.5
