Digital color difference reader colorimeter advantages
1).Device sensor exports japan and information processing chip is from usa, which guarantee the optical signal transfer accuracy and electrical signal stability.
2).Multiple color space display color values : l*a*b, l*c*h, yxy.
3).Can test degree of whiteness and yellow degree
4).Ergonomic design
5).Free color management software
6).Establish the prototype data l*a*b* by manually
7).The device could store 10 standard sample groups and every sample group could store 100 sample data.
Digital color difference reader colorimeter packing
A. Three years guarantee time.
B. If testing result is not correct, we will refund to you.
C. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
Our device is with mature pc management software. It could connect the colorimeter with the pc. With the software, we could save and manage the color data, derive the data, generate testing report, test report printing. It will help the color analysis worker finish the job much easier.
1. Brief Introduction of Spectrophotometer CS-580
Our spectrophotometers adopt high technology from overseas. It tests based on the condition of D/8 that is internationally used. Our device is widely used for color testing for any industry especially for painting, textile, plastic cement, food, building material and other productsâ?? color quality control. It could connect with color matching software.
2.Advantages of our Spectrophotometer CS-580
1).Obtained Metrology Accreditation Certificate in China
2).Large data storage space
3).Large TFT display screen
4).Modern and fashionable design based on human engineering
5).Easy to operate and compact operation interface
6).Pre-locating panel design for easy instrument calibration
7).Uses LED light source; high capacity rechargeable lithium-ion battery
8).Can measure both SCI(specular included)and SCE(specular excluded) at the same time
9).Includes PC software to manage data
10).Can connect to micro-printers for printing
3. Spectrophotometer Longest Guarantee Time
a. One Year Guarantee Time.
b. If testing data is not correct, we can do refund.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
4. Technical Data
Type:CS-580
Measure Conditions:d/8(Diffused lighting, observe angle:8 degrees)
SCS optical engine(light splitting and integration system),ETC(every test calibration), SCI(specular reflection included)/SCE(specular reflection excluded),simultaneous measurement(conform to CIE No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c standards)
Size of Integrating Sphere:40mm,Alvan diffused reflection surface coating
Illumination Light source:CLEDs(entire wavelength balanced LED light source)
Sensor:Double Optical Array Sensor
Wavelength Range:400-700nm
Measure Range / resolution factor:0-200% , 0.0001
Observation Angle:2°/10
Measurement LightSource:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30,DLF,NBF,TL83,TL84
Data being displayed:SPD distribution/data, sample color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate testing report
Measurement time interval: 2 seconds
Measuring Aperture:Φ8mm
Color space:CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance
Color difference formulas:Î?E*ab, Î?E*CH, Î?E*uv, Î?E*cmc(2:1), Î?E*cmc(1:1),Î?E*94,Î?E*00
Other colorimetric indices:WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby),
YI(ASTM D1925,ASTM E313-00,ASTM E313-73),
Tint(ASTM E313,CIE,Ganz),
Metamerism index Milm, Stick color fastness, Color fastness
Repeatability: standard deviation within 0.08%
color values: E*ab
Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on.
Introduction for Digital Gloss Meter
1).High Precision
Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data.Our gloss meters conform to JJG 696 standard for first class gloss meters. Every machine has metrology accreditation certificate from State Key Laboratory of modern metrology and testing instruments and Engineering center of the Ministry of Education in China.
2).Super Stability (Patent Right No.: ZL2012201796876)
Every gloss meter made by us has done the following test:
412 calibration tests;
43200 stability tests;
110 hours of accelerated aging test;
17000 vibration test.
3).Comfortable Grab Feeling
The shell is made by Dow Corning TiSLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience.
4).Large Battery Capacity
We fully utilized every space of the device and specially custom made advanced high density lithium battery in 3000mAH , which ensures continuous testing for 54300 times.
5).Digital Gloss Meter Application Example
The digital gloss meter could be widely used for testing the glossiness of print, ink, electroplate, plastic, tile, metal products, ceramics, auto accessories, furniture, leather, paper,etc.
6). Digital Gloss Meter Technical Support
a. Three Years Guarantee Time.
b. If testing result is not correct, we will refund to you.
7).Packing And delivery
Packing Material:Foam with carton box
Packing Size:230x220x120mm
Packing Weight:0.56kgs
Delivery Time:1-5 working days according to the type and quality ordered.
8).Glossmeter Technical Data
Model:CS-380
Test Angle:20,60,85
Test light spot(mm):20:10*10 60°:9*15 85:5*38
Test range: 20:0-2000GU; 60:0-1000GU 85:0-160GU
Resolution: 0.1GU
Repeatability: 0-100GU:0.2GU 100-2000GU:0.2%GU
Accuracy:Conform to JJG 696 standard for first class gloss meter
Test time:Less than 1s
Data storage:100 standard samples; 10000 test samples
Size(mm):165*51*77 (L*W*H)
Weight:About 400g
Language:Chinese and English
Battery capacity:3000mAh lithium battery
Port:USB, Bluetooth (optional)
Upper-PC Software:Include
Working Temperature:0-40
Working Humidity:
1.CS-820 Colour Spectrophotometer for Textile Advantages
1).Transmittance and reflectance in one instrument
2).Simultaneous SCI/SCE measurement
3).4 Testing Calibers
CS-820 colour spectrophotometer contains 4 kinds of testing calibers and the largest reaches 25.4mm.
4).Double optical path spectrum analysis technology
5).It is with large display screen. So the testing result could be directly and clearly seen without connecting with PC.
2.Colour Spectrophotometer CS-820 Technical Data
Type:CS-820
Measurement Condition:
Reflection: d/8(Diffused lighting, 8 degrees receiving)
Compatible with SCI/SCE Measurement ISO7724/1,DIN5033 Teil7,JIS Z8722 condition C,CIE No.15,ASTM E1164)
Transmission d/0(Diffused lighting, Vertical direction receiving)
Size of integrating sphere:Φ15.2cm, Alvan diffused reflection surface coating
Illumination Light source:CLEDs(entire wavelength balanced LED light source)
Sensor:dual light path sensor array
Wavelength range:400-700nm
Wavelength interval: 10nm
Half spectral width: 5nm
Reflectivity range:0-200%
Reflectivity resolution:0.01%
Observation angle:2°/10°
Measurement light source:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12
CWF,U30,DLF,NBF,TL83,TL84
Data being displayed: reflectance value and figure, sample's color values, color difference values/graph, pass/fail results, color error tendency, history data color simulation, manual input standard sample, generate measurement report
Measurement time interval:2 seconds
Reflection Apertures:Large Aperture (LAV):2.54cm (=1inch)
Medium Aperture (MAV):1.5cm(=0.6inch)
Small Aperture (SAV):0.75cmx1.0cm(0.3inch x 0.4inch)
Very Small Aperture (VSAV):0.3cmx0.8cm(0.12inch x 0.31inch)
Color space:CIE-L*a*b,L*C*h,CIE-L*u*v,XYZ,Yxy,Transmittance, Hunterlab, Munsell MI,CMYK, RGB,HSB
Color difference formulas:Î?E*ab,Î?E*CH,Î?E*uv,Î?E*cmc(2:1),Î?E*cmc(1:1),Î?E*94,Î?E*00
Î?Eab(Hunter),555color classification
Other colorimetric indices:WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner
Repeatability:light splitting reflectivity: standard deviation within 0.08%
color values:E*ab
introduction of Iron Oxide Slurry Bench top Color Reader Color Tester CS-800
1).Iron Oxide Brief Introduction
Pigment is a very important chemical raw material. It is widely used for painting industry, ink industry, plastic industry and other industries. It could be roughly separated into organic pigment or inorganic pigment. Iron oxide is called excellent dying organic pigment. Because of the large production quantity of iron oxide, the color quality control for the Iron Oxide becomes a very essential part.
2).Our device Comparing With Imported Instrument
In the Iron Oxide production industry, most factories choose imported colorimeter from USA. The device prices are high and troublesome for the warranty. Now we have good news. After being tested, the testing result of our device is not much difference with the imported device. We have the advantage of lower price and easier maintenance.
3).How to test with our device CS-800 Bench top Color Reader Color Tester?
Mix the Iron Oxide powder with printing ink to make it into slurry. And then paint it on the white paper(we will call it- sample paper). In order to keep the clean of the device, we need find the other paper and cut a hole with diameter 11mm (same with the testing port of CS-800). And then cover it on the sample paper ( the testing material should be naked) and then put it on the testing port. With this method, we will get the color difference data for the two samples.
4).Technical Data
Type:CS-800
Illumination:d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards)
Size of integrating sphere:Φ40mm,Alvan diffused reflection surface coating
Illumination Light source:CLEDs(entire wavelength balanced LED light source)
Sensor:dual light path sensor array
Wavelength range:400-700nm
Reflectivity range:0-200%
Measurement light source:A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF
Data being displayed: reflectance value/data, sample's color values, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, history data color simulation, manual input standard sample, generate measurement report
Measurement time:About 1 second
Measurement time interval:0.5 second
Measuring caliber:Φ11mm
Color space:CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK
Color difference formulas:E*ab,E*CH,E*uv,E*cmc(2:1),E*cmc(1:1),E*94,E*00,
Eab(Hunter),555,color classification
Other colorimetric indices:WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Standby),YI(ASTM D1925,ASTM E313-00,ASTM E313-73),
Tint(ASTM E313,CIE,Ganz),metamerism index Milm,
adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density,E density, M density
Repeatability:light splitting reflectivity: standard deviation within 0.08%
color values:E*ab
Product Description
1.Paint Color Tester Introduction
Color tester is also called colorimeter and widely used in different industries such as fruit (apple,tomato,pepper,etc),pet food, plastic, printing, paint, textile and dyeing.It measures the sample color data L*a*b*(L represents brightness), L*c*h*, color difference ÎE and ÎLab according to CIE color space.
2.Paint Color Tester Advantages
1).Device sensor exports Japan and information processing chip is from USA, which guarantee the optical signal transfer accuracy and electrical signal stability
2).Multiple color space display color values : L*a*b,L*c*h,Yxy
3).Can Test Degree of Whiteness and Yellow Degree
4).Ergonomic Design
5).Free Color Management Software
6).Establish the Prototype Data L*a*b* by manually
7).The device could store 100 standard sample groups and every sample group could store 100 sample data.
paint color tester paint color tester
3.Paint Color Tester Technical Data
Type:CS-200
Illumination system:8/d(8°/diffused illumination) SCI
Testing Aperture Diameter:8mm (option 4mm)
Measuring conditions:CIE 10° standard observer; CIE D65 light source
Display: Chromaticity Value:L*a*b*,L*c*h,ÎE*ab,relative RGB value
YI (yellowness index) and WI (whiteness index)
Measuring range:L*:1-100
Repeatability:Standard deviation within delta E*ab*,below 0.08(testing condition: measure the white calibration board for average)
Storage:100 sets of standard samples; up to 100 under each standard sample
Measuring time:About 0.5 seconds
Measuring light source:LED
Languages:Chinese, English
Power:Four AA1.5V Alkaline battery or nickel-metal hydride batterys; Exclusive DC5V adapter
Size:7786210mm
4.Paint Color Tester Longest Guarantee Time
a.One Year Guarantee Time.
b. If testing result is not correct, we will refund to you.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
5.Paint Color Tester Color Management Software
Our device is with mature PC management software. It could connect the colorimeter with the PC. With the software, we could save and manage the color data, derive the data, generate testing report, test report printing. It will help the color analysis worker finish the job much easier. (Software english version is also available.)
6.Packaging & Shipping
Packing Material:Canvas bag with carton box
Packing Size:230x230x120mm
Packing Weight:0.56kgs
Delivery time:1-5 days after payment received.
1.Colorimeter Introduction
Colorimeter is widely used in different industries such as cosmetic industry, plastic cement, printing, paint, weaving and dyeing. It measures the sample color data L*a*b*, L*c*h*, color difference E and Lab according to CIE color space. Our colorimeter could work with micro printer to print the testing result anywhere and anytime.
2.Colorimeter Advantages
CS-210 includes a camera to view the testing area which can easily avoid testing errors.
1).Device sensor exports Japan and information processing chip is from USA, which guarantee the optical signal transfer accuracy and electrical signal stability.
2).Multiple color space display color values : L*a*b,L*c*h,Yxy.
3).Can Test Degree of Whiteness and Yellow Degree
4).Ergonomic Design
5).Free Color Management Software
6).Establish the Prototype Data L*a*b* by manually
7).The device could store 10 standard sample groups and every sample group could store 100 sample data.
8).Can connect to micro-printers for printing
3.Colorimeter Specification
Type:CS-210
Illumination system:8/d(8°/diffused illumination) SCI
Testing Port Diameter:About 8mm
Measuring conditions:CIE 10° standard observer; CIE D65 light source
Measuring range and Display:L*:1-100
Chromaticity Value:L*a*b*,L*c*h,E*ab,relative RGB value
Whiteness:Hunter and Ganz
Yellow:YI
Repeatability:Standard deviation within delta E*ab*,below 0.08(testing condition: measure the white calibration board 80 times for average)
Storage:100 sets of standard samples; up to 100 under each standard sample
Measuring time:About 0.5 seconds
Measuring light source:LED
Languages:Chinese, English
Power:Four AA1.5V Alkaline battery or nickel-metal hydride batterys; Exclusive DC5V adapter
Port:USB2.0 printer
Weight:550g
Size:77 86 210mm
Other Function:Build-in Micro Camera
4.Colorimeter Longest Guarantee Time
a. One Year Guarantee Time.
b. If testing result is not correct, we will refund to you.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
5.Colorimeter Free Color Management Software
Our device is with mature PC management software. It could connect the colorimeter with the PC. With the software, we could save and manage the color data, derive the data, generate testing report, test report printing. It will help the color analysis worker finish the job much easier. (Software english version is also available.)
6.Packaging & Shipping
Packing Material:Canvas bag with carton box
Packing Size:230x230x240mm
Packing Weight:1.8kgs
Delivery time:3-5 days after payment received.
1.CS-260 Mobile Colorimeter Introduction
Mobile colorimeter is widely used in different industries for color difference test such as paper,electroplating oxide,paint,plastic cement,printing,weaving and dyeing.It measures the sample color data L*a*b*, L*c*h*, color difference E and Lab according to CIE color space.Our colorimter could work with micro printer to print the testing result anywhere and anytime.
CS-260 is with build-in pantone color chart.After color measurement,it will match the most similar pantone color number automatically.
2.CS-260 Mobile Colorimeter Advantages
1).Device sensor exports Japan and information processing chip is from USA, which guarantee the optical signal transfer accuracy and electrical signal stability.
2).Multiple color space display color values : L*a*b,L*c*h,Yxy.
3).Can Test Degree of Whiteness and Yellow Degree
4).Ergonomic Design
5).Free Color Management Software
6).Establish the Prototype Data L*a*b* by manually
7).The device could store 100 standard sample groups and every sample group could store 100 sample data.
8).Test different points on sample and get the average value. It is widely used for color control whose color is not uniform.
9).CS-260 could match the color with the build-in pantone color chart to get the most similar pantone color number. It will be more convenient for the worker to check.
3.CS-260 Mobile Colorimeter Specification
Type:CS-260
Illumination system:8/d(8°/diffused illumination) SCI
Testing Port Diameter:About 8mm
Measuring conditions:CIE 10° standard observer; CIE D65 light source
Measuring range and Display:L*:1-100
Chromaticity Value:L*a*b*,L*c*h,Delta E*ab,relative RGB value
Yellowness Index (YI) and Whiteness Index (WI)
Repeatability:Standard deviation within delta E*ab*, below 0.08(testing condition: measure the white calibration board 80 times for average)
Storage:100 sets of standard samples; up to 100 under each standard sample
Measuring time:About 0.5 seconds
Measuring light source:LED
Languages:Chinese, English
Power:Four AA1.5V Alkaline battery or nickel-metal hydride batterys; Exclusive DC5V adapter
weight:550g
Size:77 86 210mm
4.CS-260 Mobile Colorimeter Application
The colorimeter could be widely used for any industries for color difference measurement especially for plastic, paint, fruit, textile,printing, automobile accessories, etc.