Clients can order online from our website.
Wj102-232/485-rj45 : multifunctional serial server module
Two years warranty, ce approved
Product features:
>>modbus rtu protocol automatically converted into mobus tcp protocol
>>100m high-speed lan, 10 / 100m adaptive ethernet interface
>>support auto mdi / mdix, you can use a crossover cable or parallel cable connection
>>rs232 baud rate can be set from 300-256000
>>working mode selectable tcp server, tcp client,
Udp mode, udp server mode
>>supports virtual port mode
>>across the gateway, across switches, routers
>>can work in lan, you can also work on the internet (extranet)
>>working port, destination ip address and port can be easily set
>>flexible serial data sub-frame is set to meet user demand for subcontracting
Product overview:
Wayjun wj102-232/485-rj45 is a industrial protocol converter between rs232/485 and tcp/ip. This server uses the tcp port network packets or udp packets and rs232 or rs485 interface data to achieve transparent transmission, achieve transmission, serial servers so that you can easily connect serial devices to ethernet and internet, network management of serial devices. And compared to similar products, its distinguishing feature is the stability of full-duplex, non-stop sending large amounts of data without losing a byte.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
ECAN-401S is a small intelligent protocol conversion product independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. The product uses 8V, 28V wide voltage power supply, integrates 1 CAN-BUS interface, 1 RS485 interface, 1 RS232 interface and 1 RS422 interface, which can realize two-way conversion between CAN and RS485/RS232/RS422 different protocol data. The product supports serial AT command configuration and host computer configuration device parameters and working modes, and supports five data conversion modes including transparent conversion, transparent conversion with logo, protocol conversion, Modbus RTU conversion, and user-defined (user). At the same time, ECAN-401S intelligent protocol converter has the characteristics of small size, easy installation. It has a very high cost performance in the development of CAN-BUS products and data analysis applications. It is an engineering application and project debugging. And reliable assistants for product development.
R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU/TCP Master to collect data, convert Modbus to MQTT protocol, Transmit Transparently (Pass-through), and directly connect to cloud platforms such as AWS\THINGSBOARD etc.
With the support of diligent team of professionals, R S Enterprises is known as a leading manufacturer, supplier, exporter and trader of Water Purifier Plant, Water Softener, RO System Spare Part, Solar Lamp, Water Demineralizer, Solar Panel and many more. We also render highly reliable and effective RO System Installation Service to the customers. We have started our business in the year 2010 as a partnership based company at Chennai in Tamil Nadu, India. Our products are highly appreciated among the customers for their high reliability, advance technology, hassle free performance, excellent finishing, less maintenance requirement, long service life and various other features. Moreover, we use high grade inputs, advance technology and innovative ideas of our skilled technician in the manufacturing of these products. Our dedicated team of skilled professionals enables us to deliver the bulk consignments of customers on time with maintaining world class standards in our products. Our exporting countries are East Asia, North Asia, South Asia, Germany and Indian Subcontinent.
Item Code: WCT-805BOur Commapany offers (No AT Commands) Serial/Modbus/RTU to GPRS Gateway communication link provide a cost economical approach to achieve â??alwaysONâ?? packetized data network. It is a plug and play device, allows you the migration of your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge of AT command or GPRS. You can view this device as the virtual serial wire over the air that links all your remote equipments to the central PC. It is a full transparent, protocol independent gateway, for AMR, SCADA, general remote monitoring, control and data exchange applications. Features: Automatic Meter Reading Power Monitoring and Control Fault Indicators Temperature Alerts, Indicators Pump Control, Flow Measurements Surveillance Home Automation Windmill, SCADA, Data Exchange Central Monitoring and Control Systems Base Station, ATM Monitoring and Control Other information: Easy to plug and play allows to migrating your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge on AT command or GPRS. You can view the device like virtual serial wire over the air that links all your remote equipments to the central PC/Server. It is a full transparent protocol in-dependent gateway. It is easy to configure, manage, and monitor remote devices on a private network over the Internet. The products also come with built-in I/O that can be configured to indicate the priority of events. The device can configured or update firmware over the air (OTA).
Product Overview G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station. Features Be tallied with HART7.0 HART master and Modbus slave mode 4~20mA analog signal overlay HART digital signal Support 15 HART slave device Configure gateway by special software Write protect user data RS485 Modbus interface LED power and communication indicating Standard DIN rail installation
Product Overview M0313 module makes it possible to convert Modbus RTU protocol directly to FF H1 protocol. Using M0313 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to FF protocol. M0313 module is provided with two LED indicating lights, used to indicate the current working status. Features Support 1 Modbus RTU slave device 1 RES function block complying to FF specification 1 Modbus transducer block 4 PID function blocks complying to FF specification 4 for each AI,AO,DI,DO function block complying to FF specification, each function block supports 8 channels Modbus RTU device upgrading LED working status indicator
S275 is a 4G RTU with IIoT data acquisition remote monitoring and control SMS alarm functions it is widely used in remote data acquisition and monitoring of various industries such as smart grid smart transportation industrial automation smart building firefighting public safety environmental protection meteorology digital medical agriculture forestry water coal mining petrochemical and other fields 8 digital input 4 relay output 6 analog input and 1 temperaturehumidity input 1 RS485 serial port Modbus RTU MasterSlave can expand multiple Modbus Slave devices Max 320 data points Embedded TCPIP stack supporting Modbus RTU Modbus TCP and transparent transmission Builtin powerful telephone and SMS alarm function regular reporting abnormal upper and lower limit alarm Local logic control of the device linking relay outputs based on monitoring of digital input and analog value thresholds Antidropout mechanism to ensure the device always online and it comes with data retransmission function Support remote configuration remote management and remote restart by SMS Builtin powerful timer function support timed automatic reporting timed daily SMS timed online timed offline timed restart timed execution relay output etc
MODBUS-RTU master station, comply with MODBUS-RTU protocol Electrical interface connected with Modbus device supports TTL level Set MODBUS-RTU slave station via parameters provided by GSD file Company Information Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.