Clients can order online from our website.
Wj102-232/485-rj45 : multifunctional serial server module
Two years warranty, ce approved
Product features:
>>modbus rtu protocol automatically converted into mobus tcp protocol
>>100m high-speed lan, 10 / 100m adaptive ethernet interface
>>support auto mdi / mdix, you can use a crossover cable or parallel cable connection
>>rs232 baud rate can be set from 300-256000
>>working mode selectable tcp server, tcp client,
Udp mode, udp server mode
>>supports virtual port mode
>>across the gateway, across switches, routers
>>can work in lan, you can also work on the internet (extranet)
>>working port, destination ip address and port can be easily set
>>flexible serial data sub-frame is set to meet user demand for subcontracting
Product overview:
Wayjun wj102-232/485-rj45 is a industrial protocol converter between rs232/485 and tcp/ip. This server uses the tcp port network packets or udp packets and rs232 or rs485 interface data to achieve transparent transmission, achieve transmission, serial servers so that you can easily connect serial devices to ethernet and internet, network management of serial devices. And compared to similar products, its distinguishing feature is the stability of full-duplex, non-stop sending large amounts of data without losing a byte.
Wj90 - rj45
Communication interface
Rj45: rj-45 output network interface
Wj90-rj45 general parameters:
(typical @ +25 �??, vs to 24vdc)
Input type: digital signal input, 8 channels (di0~di7)
Low level: input> eight digital inputs, eight digital output industrial ethernet i/o
>> supports modbus tcp protocol
>> built-in web feature, you can query level state by the web
>> switch output state can be set via the web
>> no signal isolation between input, output and power supply
>> wide power supply range: 8 ~ 32vdc
>> high reliability, easy programming, easy application
>> standard din35 rail mounting , small size
>> users can set the module ip address and other parameters on the page
>> web login can be set account and password
>> dimensions: 120 x 70 x 43mm
16-CH DI Switch Signal to RS485/232 Converter
WAYJUN WJ61 series 16-ch DI Isolated Digital Signal to RS485/232 Module,Slim-line plastic housing with integral 35mm DIN rail mounting , terminals,power supply(8-32VDC)
Features�?
>> Sixteen channels isolated digital signal input,isolated RS-485/232 output
>> Support 16-ch dry contact input or 16-ch wet contact input
>> Input/output:3000VDC isolation
>> Over voltage protection,reverse polarity protection
>> Can read level status of each channel via the RS-485/232 interface
>> 3000VDC isolation between input and output
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, easy programming, easy application
>> DIN35 Rail-mounted
>> Can programme setting module address,baud rate
>> Support Modbus RTU communication protocol
>> Dimensions: 120 mm x 70 mm x 43mm
Applications�?
>> level signal measurement, monitoring and control
>> RS-485 remote I / O, data acquisition
>> Intelligent building control, security engineering applications
>> RS-232/485 bus in industrial automation control system
>> Industrial signal isolation and long-term transmission
>> Equipment operation monitoring
>> Sensor signal measurement
>> Industrial data acquisition and recording
>> Medical, industrial product development
>> Switching signal acquisition
Digital signal input types:
1.Dry contact input
2.Wet contact input
3.Open collector input
Product List:
Type No.: WJ61-485 (input:16-ch digital signal,output:485 interface)
Type No.: WJ61-232 (input:16-ch digital signal,output:232 interface)
clients can order online by our website.
Products selection guide:
WJ21 U(A)
Input signal(current/voltage) Communication Interface
U10-5V A10-1mA 485 RS-485 output interface
U20-10V A20-10mA 232 RS-232 output interface
U30-75mV A30-20mA
U40-2.5V A44-20mA
U50-�5V A50-�1mA
U60-�10V A60-�10mA
U70-�100mV A70-�20mA
U8user-defined A8user-defined
Products List Samples:
WJ21-A4-485 (4-20ma input signal, output is rs485 interface)
WJ21-A3-232 (0-20ma input signal,output is rs232 interface)
WJ21-A7-485(0-�20mA input,output is rs485 interface)
WJ21-A4-232 (4-20ma input signal, output is rs232 interface)
Other types,please check our datasheet.
Analog Current signal to RS485 or RS232 Converter/Analog data acquisition module.Slim-line plastic housing with integral 35mm DIN rail mounting , power supply(8-32VDC)
Features
>> Analog signal acquisition,isolated RS-485/232 output
>> 12-bit AD converter,testing accuracy>0.1%
>> Can Program and calibrate modules accuracy via RS-485/232 interface
>> Signal input/output: 3000VDC Isolation
>> Wide Power supply:8~32VDC
>> High reliability,easy programming,easy installation.
>> Can program setting module address,baud rate
>> 0-5V/0-10V/0-12V voltage signal or 4-20mA/0-20mA current signal input
>> Supports Modbus RTU protocol
>> DIN35 Rail-mounted
>> Dimension: 106.7x79.0x25.0 mm
Features:
>> Input: Pt100/PT1000/PT10/Cu50/Cu100
>> Output signal: 4-20mA/0-20mA/0-5V/0-10V/1-5V
>> Accuracy: 0.2 (FSR%)
>> Containing linear and long-term compensation
>> Power supply5V(� 10%)/12V/15V/24VDC (8-32VDC)
>> Isolation voltage: 2500VDC (1mA, 60S)
>> Installation: DIN35 rail
>> Industrial temperature range: - 45 ~ + 85
>> Size:79x69.5x25mm
Product description:
The product is isolated Pt100/PT1000/PT10/Cu50/Cu100 temperature sensor transmitter, in industry mainly used for measuring the temperature of -200 ~ +500 . The transmitter has linear and long-term compensation, the factory in accordance with national standard Pt100 indexing table calibration, fully meets 0.2accuracy. Input, output and auxiliary power supply is completely isolated (three isolation), can withstand 2500VDC isolation voltage. Products using international standards for rail mounting DIN35, small size, high precision, stable performance, cost-effective, can be widely used in petroleum, chemical, power, instrumentation and industrial control industries.
Samples:
signal Input: Pt100,temperature range:0~100; signal output:4-20mA; power:24V
Part No.: WJ11-Z1-T2-P1-A4
signal Input: Pt1000,temperature range:0~200; signal output:0-10V; power:12V
Part No.: WJ11-Z5-T4-P2-V2
One In/One Out PT100 to 4-20mA/0-5V analog signal isolated converters/transducer/temperature converter/thermal resistance converter
Features:
>> One input two output
>> Accuracy: 0.1%, 0.2%
>> Isolation : signal input / output / auxiliary power 3000VDC
>> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> Two standard output signal: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> Dimensions: 106.7x79.0x25.0mm
>> Auxiliary power supply: DC5V(± 10%), 12V,15V, 24V(8-32VDC)
>> Insulation resistance :� 20MΩ
>> Operating Temperature : -25 to +80 ° C
>> Pressure : signal input / output / auxiliary power
>> Operating Humidity :10 ~ 90% (no condensation)
>> Storage Temperature :-45 ~ +80 â??
>> Impulse withstand voltage : 3KV, 1.2/50us (peak value)
>> Storage humidity :10 ~ 95% (no condensation)
WAYJUN this product uses advanced isolated technology, quarantine inspection / monitoring DC voltage signal, small size,low power,high accuracy. Input/output/auxiliary power supply three isolation.Widely used in such fields as electricity, chemicals, petroleum, industrial and automatic control.
Selection Guide:
Samples:
1.Input:0-5V Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- V1-P1-A4
2.Input:0-10V Power Supply:24V Output:0-10V/4-20mA Type No.: DIN12 IAP-V2-P1-V2A4
3.Input:4-20mA Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- A4-P1-A4
4.Input:0-10V Power Supply:24V Output:two 0-10V Type No.: DIN12 IAP V2-P1-V2
Differential signal/Pulse signal isolated Transmitter
(three input three output)
Features:
>> Differential signal/Pulse signal isolated transmitters
>> Support A, B, and Z three-phase differential simultaneous conversion
>> 3 inputs, 3 outputs, selectable output pulse amplitude
>> No change the original waveform frequency, response speed is over 500KHz
>> Three-isolation :signal input/Power/signal output 3000VDC
>> Power supply: 5V, 12V, 15V or 24V DC single power supply
>> Low cost, high small size, ease of use, reliability
>> Standard DIN35 rail mounting
>> Dimensions: 120 mm x 70 mm x 43mm
>> Industrial Temperature Range: - 45 ~ + 85
Application:
>> Encoder differential signal isolation, acquisition and conversion
>> Differential encoder 24V square wave pulse signal transduction
>> Servo encoder signals to the PLC differential
>> Pulse signal amplification and shaping
>> Ground interference suppression
>> Motor speed monitoring system
>> Speed measurement and alarm
>> Signals without distortion transmission and transmission
Products Samples:
1: Input: Encoder differential signal Power supply: 24V Output: 0-5V level
Type No.: DIN33 IAP-S5-P1-O1
2: Input: Encoder differential signal Power supply: 12V Output: 0-24V level
Type No.: DIN33 IAP-S5-P2-O3
3: Input: 0-5V level Power supply: 24V Output: 0-24V level
Type No.: DIN33 IAP-S2-P1-O3
4: Input: 0-5V level Power supply: 12V Output: open collector
Type No.: DIN33 IAP-S2-P2-O4
6.Input:0-24V Power supply: 24V Output: differential signal
Type No.: DIN33 IAP-S4-P1-O5
Note:
1. Before using, according to packing lists, and product labels, check the quantity, models and specifications
2. When measure the signal directly, please set the terminal tighten
3. There are no damaged insulation, conductive dust and corrosive fumes of metal in the environment
4. Installation pitch â?¥10mm
5. We have adjusted well, do not adjust arbitrarily
6. Two years warranty. But if clients damage products by themselves or tear off any labels on the product, we can not
exchange
7. Products can not been used in strong magnetic field
8. Internal no anti-lightning circuit
9. Specifications subject to change without notice
Copyright
Copyright © 2012 Shenzhen WAYJUN Industrial Automation
Brand
In this manual, mentioned other trademarks and copyright belongs to their respective owners.
More details,please check:http://www.wayjun.net/index.php?main_page=product_info&cPath=2&products_id=66
clients can order from our website directly online by paypal.
0-100mA/0-1A/0-500mA Large current signal output isolators(output power 5W,please check our DIN11D IAP series.
Features:
>> Optical Isolation
>> Accuracy grade: 0.1/0.2/0.5. Factory calibrated, the user can use directly
>> Auxiliary power supply: 5V/12V/15V/24VDC or 220VAC (± 10%)
>> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> One standard output signal: 0-100mA/0-500mA/0-1A current signal or 0~1V(max 1A)/0~10V(max 500mA) voltage signal
>> High linearity (nonlinearity > DIN35 rail mounting
>> Size: 106.7x79.0x25.0mm
>> Strong anti-electromagnetic interference and high-frequency signal interference capability
Application:
>> Analog signal data isolation, collection and transformation
>> Isolated 4-20mA or 0-20mA signal transmission
>> Signal isolation and conversion of industrial site
>> Long-term signal transfer without distortion
>> Instrument signal transceiver
>> Power monitoring, medical equipment isolation
Samples:
1: Input: 4-20mA Power Supply:24V Output: 0-10V ,20 ohm Type No.: DIN11L IAP A4-P1-V2(20 ohm)
2: Input: 4-20mA Power Supply: 24V Output: 0-500mA,20 ohm Type No.: DIN11L IAP V4-P1-Azï¼?Az:0-500mA,20 ohmï¼?
DIN11L IAP - V(A)â?¡ - Pâ?¡ â?? V(I)â?¡
Input Signal
Power Supply
Output Signal
Voltage
Code
Current
Code
Power
Code
Current
Code
Voltage
Code
0-5V
V1
0-1mA
A1
24VDC
P1
0-20ma
A3
0~5V
V1
0-10V
V2
0-10mA
A2
12VDC
P2
4-20ma
A4
0-10V
V2
0-75mV
V3
0-20ma
A3
5VDC
P3
user-defined
Az
1-5V
V6
0-2.5
V4
4-20mA
A4
15VDC
P4
user-defined
Vz
user-defined
Vz
user-defined
Az
WAYJUN WJ80 series
Features:
>> Eight 4-20mA input Modbus TCP communication protocol
>> Four digital inputs, two digital outputs
>> Built-in web page function, you can query the data through the web page
>> The module data can be set via web page
>> 3000V isolation between 4-20mA signal input and power supply
>> Wide power supply range: 8 ~ 32VDC
>> high reliability, easy programming, easy to use
>> DIN35 standard DIN rail installation, easy centralized wiring
>> Users can set the module IP address and other parameters on the webpage
>> Web login can set up account and password, more secure
>> Low-cost, small size, modular design
>> Dimensions: 120 x 70 x 43mm
WAYJUN this signal isolated splitter product uses advanced isolated technology, quarantine inspection / monitoring DC voltage signal, small size,low power,high accuracy. Input/output/auxiliary power supply three isolation.Widely used in such fields as electricity, chemicals, petroleum, industrial and automatic control.
Selection Guide:
1.Input:0-5V Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- V1-P1-A4
2.Input:0-10V Power Supply:24V Output:0-10V/4-20mA Type No.: DIN12 IAP-V2-P1-V2A4
3.Input:4-20mA Power Supply:24V Output:two 4-20mA Type No.: DIN12 IAP- A4-P1-A4
4.Input:0-10V Power Supply:24V Output:two 0-10V Type No.: DIN12 IAP V2-P1-V2
Features:
>> One input two output
>> Accuracy: 0.1%, 0.2%
>> Isolation : signal input / output / auxiliary power 3000VDC
>> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> Two standard output signal: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> Dimensions: 106.7x79.0x25.0mm
>> Auxiliary power supply: DC5V(± 10%), 12V,15V, 24V(8-32VDC)
>> Insulation resistance :� 20MΩ
>> Operating Temperature : -25 to +80 ° C
>> Pressure : signal input / output / auxiliary power
>> Operating Humidity :10 ~ 90% (no condensation)
>> Storage Temperature :-45 ~ +80
>> Impulse withstand voltage : 3KV, 1.2/50us (peak value)
>> Storage humidity :10 ~ 95% (no condensation)
