Agglomerated Flux Sj601

Agglomerated flux High efficiency, energy saving, Excellent welding performance, High quality, low comprehensive cost. Agglomerated Submerged Arc Welding Flux SJ301 Classifications : GB F4A2-H08A F5A2-H08MnA AWS F6A2-EL12 F7A0-EM12K General Characteristics : Type: silicon calcium Basicity: 1.0-1.1 Grain Size: 10-40 meshes(2.0-0.45mm) Currency: AC/DC(wire to be connected to the positive electrode when using DC) Features: *stable burning arc, easy slag removal and smooth bead with head appearance. Applications *suitable for welding low alloy steels for important products, such as ships, boilers, pressure vessels, pipelines and so on; *suitable for multiple-wire submerged arc welding, especially for butt welding of large diameter vessel with one-pass on both sides; *usually used for SAW of liquefied gas storage tanks, gas bottles and pipeline steel. Typical Chemical Compositions of the Flux (approx, %): SiO2+TiO2 CaO+MgO Al2O3+MnO CaF2 30-40 20-30 25-30 5-13 Mechanical Properties of all Weld metal: wire s/ Mpa b/ Mpa 5/ % AKV(J) EL12 340 420 22 27(-20C) EM12 448 490 22 27(-40C) Notes: 1 Fluxes to be baked for two hours at 300-350C before using; 2 Removal of rust, oil, dirt, water, impurities etc in welding-areas. 25kg/bags. In standard export package or on customer requirements.

Classifications: GB F4A2-H08A F5A2-H08MnA AWS F6A2-EL12 F7A0-EM12K General Characteristics: Type: silicon calcium Basicity: 1.0-1.1 Grain Size: 10-40 meshes(2.0-0.45mm) Currency: AC/DC(wire to be connected to the positive electrode when using DC) Features: *Stable burning arc, easy slag removal and smooth bead with head appearance. Applications: * Suitable for welding low alloy steels for important products, such as ships, boilers, pressure vessels, pipelines and so on; * Suitable for multiple-wire submerged arc welding, especially for butt welding of large diameter vessel with one-pass on both sides; * Usually used for SAW of liquefied gas storage tanks, gas bottles and pipeline steel. In standard export packages, or according customer requirements.

Classifications: GB F4A4-H08MnA F5A4-H10Mn2A AWS F7A4-EH14 JIS S502-H General Characteristics: Type: fluoride-alkaline type slag serial Basicity: 1.6-1.8 Grain Size: 10-60 meshes(2.0-0.28mm) Color: gray Currency: AC/DC(wire to be connected to the positive electrode when using DC) Features: * Stable burning arc, easy slag removal and smooth bead with head appearance. * Allweld metal shows excellent toughness at low temperatures with lowdiffusion of hydrogen, fine cold and heat crack resistance. Typical Chemical Compositions of the Flux (approx, %) SiO2+TiO2 15-25 CaO+MgO 20-35 Al2O3+MnO 20-30 CaF2 15-20 Mechanical Properties of all Weld metal wire s/ Mpa b/ Mpa 5/ % AKV(J) -40C -20C EL12 340 450~550 22 47 90 EM12 380 480~600 22 70 100. In standard export package or on customer requirements.

1. CaCO Advantages in Paint and Surface Coatings: It solidifies It controls the viscosity It lowers the cost by reducing the consumption of titanium dioxide It enhances opacity due to its high whiteness property It strengthens It increases the impact resistance of the paint film It gives brightness to the paint It prevents the paint films to peel off It provides a smooth film surface It has an ultra-hiding power It has a high dispersion feature 2. CaCO Advantages in Plastic Sector: Some advantages of the calcite over the plastics are as follows: Depending on different chemical surface coating, it provides dop oil saving. It provides pigment saving due to its high whiteness. It has a flame retardant property due to its chemical structure. It increases the writability of the packing materials. It has a positive effect on notched impact strength. It has a regulatory impact on the viscosity in polymer. The micronized calcite used as a filling material in plastic sector: Must control the rheological properties of PVC plastisols, Must not include heavy metals causing polymers to age, Must have high chemical purity, Must have high whiteness for saving expensive white pigments, Ground particles must not gather together and agglomerate again, Must not intake high amount of oil, Must not absorb the flux oil or the chemical substances used in the formulation, Must not cause machines to be worn, Must have homogeneity, Must have a high rate of whiteness for saving expensive white pigments and dyeability at high filling levels, Must disperse easily, Must enhance hardening, the structural properties of the final product, impact resistance, stability and resistance against ageing, Must protect against heating up due to its solidifying effect, Must prevent blocking on broken film surfaces, Must be scentless, tasteless and non-toxic.

Supplier: Welding consumable, agglomerated flux, fused flux.

E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties. AWS Specification: AWS A5.20 AWS Classification: E71T-1 Typical Applications: Buff and fillet welding of hulls and storage tanks Structural steel Farm machinery Construction equipment General carbon steel fabrication Welding Current: DCEP (Electrode Positive, Reverse Polarity) Typical Wire Chemistry: (as welded with 100% CO2 shielding gas): 100% CO2 75%Ar/25%CO2 C: 0.05 0.05 Si: 0.56 0.64 Mn: 1.39 1.61 P: 0.008 0.005 S: 0.014 0.01 Welding Positions: All Positions Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm Available Spools: plastic spool and metal basket Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg

Typical Applications: Typical Wire Chemistry: C: 0.09 Mn: 0.98 Si: 0.59 P: 0.01 S: 0.012 Welding Positions: Typical Mechanical Properties (As Welded): Yield Strength, Mpa: ¡Ý420 Tensile Strength, Mpa: ¡Ý510 % Elongation: ¡Ý22 Available Weight per Unit: 0.9kg, 1kg, 5kg, 12.5kg, 15kg, 20kg, 27kg, 250kg and 350kg. Available Spools: plastic spool and metal basket Available Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm

Welding electrodee7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on ac or dc reverse polarity welding current. E7018 is recommended for welding medium grade carbon steels, where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes. Typical applications: Low-alloy structures Low, medium, and high-carbon steels Offshore rigs and power plants Steel structures Tack welds for tubular wire applications Aws specification: aws a5.1 Aws classification: e7018 Welding current: ac íºc dc en (electrode negative) Typical wire chemistry: C: 0.071 Mn: 1.42 Si: 0.53 P: 0.014 Typical mechanical properties: Yield strength, mpa: ¡Ý420 Tensile strength, mpa: ¡Ý510 % elongation: 30 Welding positions: all positions Available diameters: 2.5mm, 3.2mm, 4.0mm & 5.0mm Available packing: small box and carton box

E6013 is a mild-steel, all position, general purpose cellulose-base rod. It operates on ac or dc welding current and works well on low voltage ac machines. E6013 is an excellent choice where there is poor fit-up in the joint. It deposits easily and smoothly producing medium to shallow penetration. Small sizes are well adapted to low heat on thin metals. Medium to heavy slag is easily removed and provides for excellent weld cleaning action during the welding process. Typical wire chemistry: C: 0.063 Mn: 0.50 Si: 0.27 P: 0.017 Available diameters: 2.5mm, 3.2mm, 4.0mm & 5.0mm