S&K Glass Bending Furnace - this glass working furnace adopts automatic thermostat to control heating temperature during bending, fusing, melting and slumping procedure, which keep heating steady and noiseless. The furnace cover is easy to open and close by installation of fluid drive. It is easy to operate the machine. It takes hours to finish the bending processing per time. It is suitable for heat bending glass. such as making bending glass. fusing glass, slumping, melting, glass wash basin, furniture glass, decorative glass project and so on.
Glass heat bending furnace (NEW type)-FY-W-A This machine have top and bottom heating chambers, the top chamber is for heating and bottom chamber is for fixing shapes. Its temperature is controlled by imported PLC. The platform is elevated by air cylinder. It is easy to be operated. It takes about 5 hours to finish one time. It is suitable for heat bending glass, such as, glass furniture, glass coffee table, glass sanitary right corner counter top and decorative project glass, etc. Parameter: 1.thickness : 3-25mm 2.power : 380V/26kw 3.dimension : 2700*1441*1320mm 4.inner size : 2300*1100*700mm 5.N.W : 1.2T 6.Speed: heating time 2-2.5 hours cooling time 3 hours
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Main purpose: GX-P series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purposes, interior decorations, furniture appliances, instrumentation, lamp, etc. Main technical Features: Glass sheet size: Max size 3500 x 12000(mm).Min size 60 X 60(mm): High quality and product: Up to GB9963, GB9656, ECER43, ANSIZ97.1 standards: Broad applicability: Float glass, coated glass, rolled patterned glass; Advanced heating methods: Radiation/convection matrix heating optional with intelligent heating control system: Lower energy wasting: Continue produce and tempering, reduce energy wastering; Easy operation: User-friendly interface, whole produce with auto-control; Full date storage: Computer-stored glass-type parameter recipes for full range of glass types. Suit for sea transportation
Magnesia Bricks Description Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application. Magnesia Bricks Features: It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature. Magnesia Bricks Application Basic open-hearth furnace for steelmaking Electric furnace bottom and wall Permanent lining of oxygen converter Non-ferrous metal metallurgy furnace Hyperthermia tunnel kiln Lining of rotary cement kiln Heating furnace bottom and wall Regenerative chamber of glass furnace Magnesia Bricks Properties High Refractoriness Good alkaline slag erosion resistance High apparent initial softening temperature Good thermal conductivity High thermal expansion Magnesia Bricks Manufacturing Process Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
Capabilities We bend glass for all types of applications, including limousines, sunroofs, truck caps, conversion vans, residential/aquariums, commercial furnishings, marine glazing and fixturing. Transportation: Bending: For a sleek, aerodynamic appearance, glass can be bent to follow the contours of the vehicle sides and top. Our technology allows us to create precise cylindrical or complex bends without expensive tooling. Furniture / Fixtures: Envision curved glass that hugs every contour of your furniture designs. We can create cylindrical or complex bends without expensive tooling costs and temper glass to your precise specifications Marine: Imagine walls of glass soaring skyward and meeting in a curved atrium above the stern, or a sleek bent/tinted windshield and windows following the contoured lines of your marine design. These designs and most anything you can imagine are possible because of Spec-Temp's state-of-the-art equipment. BEND GLASS Size ranging from thickness 4 mm to 19 mm Max Size : 8 ft. X 6 ft.
Mica is a hydrated phyllosilicate mineral of aluminium and potassium with formula KAl(F, OH), or (KF) (AlO) (SiO). Muscovite can be cleaved into very thin transparent sheets that can substitute for glass, particularly for high-temperature applications such as industrial furnace or oven windows. It is also used in the manufacture of a wide variety of electronics and as a filler in paints, plastic, and wallboard. Our monthly supply of these mineral ranges from 1000-2000MT.
Five Stations Glass Bending Furnace One Heating Chamber, Two Closed Top Annealing Stations & Two Loading / Unloading Stations Two Wagons Moving Among 5 Stations Metal Structure with High Temperature Resistant Paint Closed Top Cover Heat Insulated with Thick Thermal Preservation Materials One Glass is Being Bent While Another Glass is Being Annealed & Cooled Middle Heating Station Fully Utilized All the Time Minimizing Downtime Minimum Heat Loss with Lowest Possible Energy Consumption Heating Elements Installed on Top of Heating Chamber Each Heating Resistor is Individually Control by Corresponding Switch on Control Panel Thermocouples Measure Real Time Temperatures z
Bend tempered glass is a breakthrough from the traditional glass technique. It changes the flat & straight character of glass by applying special techniques and bends the glass to various kinds of camber so as to satisfy the constructing arts requirements. It is the perfect integration of constructing arts and modern technology. Thickness:3mm-19mm
