M2M Io/rs485 Concetrator/a

Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters. The modem is capable of continuously counting the pulse signals of up to 4 meter systems. The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP. The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set. When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines. In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP. The modem can initiate queries through its RS485 interface towards several concentrators input lines. Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs. Communication Supporting GSM/GPRS (Gemalto�® industrial module) 4 inputs (digital or pulse/voltage) 2 relay outputs (optional) Software/Configuration Modbus protocol communication Modbus Gateway Consumption meter compatibility (receiving and counting pulse signals) Configuration software (on RS232 or RS485 port) Extras Memory for storage of applications, data (with ftp possibility) External IO-expansion (optional for receiving 32 inputs per module) Firmware upgrades (ftp server) Safety External battery connection (spare power supply) Watchdog circuit and system monitoring, log Automatic mobile network connection recovery Application Data collection (digital or pulse signal) Forwarding data of industrial systems Smart metering (remote readout) Measurement and data collecting systems Remote monitoring of devices Monitoring of input lines Remote control (optional)

The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.

SIM5218 The SIM5218 series is Tri-Band/Single-Band HSPA/ WCDMA and Quad-Band GSM/GPRS/EDGE module solution which supports up to 7.2Mbps downlink speed and 5.76Mbps uplink speed services. It has strong extension capability with rich interfaces including UART, USB2.0 high speed, Embedded SIM Card, SD Card, Camera sensor, GPS, etc. With abundant application capability like embedded LUA script,TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, it will add much value to customers'' application. It is ideal for a wide arrange of products including USB Modems, gateways, router, PDA, Video phone, and much more. General features • SIM5218A: Tri-Band UMTS/HSPA850/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz SIM5218E :Tri-Band UMTS/HSPA 900/1900/2100MHz,GSM/GPRS/EDGE850/900/1800/1900MHz SIM5218J: Tri-Band UMTS/HSPA800/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz • Video call with Camera sensor interface • WCDMA Diversity • HSDPA 7.2Mbps • HSUPA: 5.76Mbps • GPRS multi-slot class 12 • EDGE multi-slot Class 12

OPC UA I/O Controller OPC UA I/O Controller BL205 was designed for IIOT applications, adopts embedded Linux system, supports customerized development applications, built-in logic programmable function module, is compatible with OPC UA Protocol. OPC UA I/O Controller BL205 supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc., OPC UA I/O Controller BL205 integrates data acquisition, automatic control, Logic program, customerized application, and edge computing, suitable for creating a high-speed, stable and reliable industrial IoT automation control system.

Industrial design, stable and reliable, suitable for harsh environment; Support 4, 8 and 16 digital DO outputs, widely used; DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz; DO2 can be used to control the direction output of stepper motor and servo motor; 1 RS485 supports Modbus master and slave protocol for expanding IO or HMI; One RJ45 Ethernet interface supports TCP Server and TCP Client services; Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms; As a TCP server, it can support 5 TCP links at the same time.

1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design; 2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable; 3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 4. 3G/4G/NB-IoT Modules are optional; 5. Modular design, can easily upgrade the cellular module if network upgrade; 6.Support 1 channel relay output for restart the devices; 7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation; 8.Up to 10 user's phone number to receive alarm and daily report SMS/Call; 9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously; 10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol; 11.Inbuilt large capacity automatically rechargeable backup battery; 12. Industrial class design suitable for long time work applications; 13. Support configure parameters, load profiles and upgrade the firmware via PC; 14. Wall mount or 35mm standard DIN rail Design, convenient installation, 15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.

Model no S266 The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly. Advantages Quad band 850/900/1800/1900Mhz GSM GPRS Module inside; 3G UMTS/HSDPA/4G Modules are optional.; 32 bit MCU, reliable performance with in-built watchdog; Support temperature & humidity monitoring remotely in real-time; Support 8 channel temperature input interface(DS18B20 Temperature sensors); Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC; High/Low Alert via SMS/Call/GPRS; Supports 1 DNS or IP address as server; Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network; Automatically resend the data while communication failure, GPRS failure will alert by SMS text; Supports remotely restart the device, and configure it by SMS commands remotely; Up to 10 user's phone number to receive alarm and daily report SMS/Call; Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers; In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation; In-built internal clock, support 11 actions on schedule at pre-set time; Internal 16MB memory, logs more than 200000 records; Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm; Support Android/IOS APP, easily & friendly for use/config. Support remote upgrade the firmware via PC. Can be operated from anywhere, no distance limitation; Secure - Using caller ID and password for identification, unknown callers are ignored;