The PV photovoltaic systems which are ready to convert solar energy to electricity power are the results of following manufacturing processes,
The production line we provide is the machineries to convert solar cell into solar module. Solar cell could be mono crystalline or multi crystalline silicon. It includes complete machines from solar cell cutting, soldering till frame installation and inspection. The line includes following major machines and accessories,
Solar Cells Solar Panel Solar Module Ultra-high Efficiency TOPCon Module Much higher module conversion efficiency of 23%, resulting in significantly lower LCOE and greater BoS savings Low attenuation, long warranty (30-year power warranty with less than 0.4% annual linear power decay) Significantly improved temperature coefficient of -0.29% Higher bifacially of 85% leads to more power generation
250W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty1. Product Introduction of the 250W Poly Solar PanelWe supply 250W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China. 2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others265/270W Polycrystalline 60cells (156mmx156mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP265S265W+-3%31.548.4138.708.91SYP270S270W+-3%31.998.4539.348.92SYP275S275W+-3%32.998.4939.948.95STC Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONS -Cell Size60pcs (156mmX156mm)-Dimensions1640 x 992 x 35mm -Weight18.5kg -Temperature Coefficient (Voc)-0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax)-0.44%/- Junction BoxIP65- Power Tolerance±3%
200W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty 1. Product Introduction of the 200W Poly Solar PanelWe supply 200W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China.2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system 2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others230W Polycrystalline72cells (156mmx117mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP230S230W+-3%36.26.3645.27.07STCï¼? Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONSï¼?-Cell Size72pcs (156mmX117mm)-Dimensions990 x 1490 x 35mm -Weight 16.5kg -Temperature Coefficient (Voc)-0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax)-0.44%/- Junction BoxIP65- Power Tolerance±3%
250W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty1. Product Introduction of the 250W Poly Solar PanelWe supply 250W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China. 2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system 2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others250/260W Polycrystalline 72cells (156mmx130mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP240S240W+-3% 35.4 6.78 44.27.54 SYP245S245W+-3%35.76.8744.67.64SYP250S250W+-3% 36.06.9545.0 7.73 SYP255S255W+-3%36.27.0545.27.84SYP260S260W+-3%36.47.1545.47.95STCï¼? Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONSï¼?-Cell Size72pcs (156mmX130mm)-Dimensions 1640 x 992 x 35mm -Weight 18.5kg -Temperature Coefficient (Voc) -0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax) -0.44%/- Junction Box IP65- Power Tolerance ±3%
Name: High efficiency polysilicon wafer Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Advantage of High efficiency polysilicon wafer for solar cell The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Advantage of high quality rHigh efficiency polysilicon wafer for solar cell The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Equipment situation Seiko JJL800F Type, 36 polycrystalline ingot foundry furnaces, the annual output is 2000 tons of semi-fused high efficiency polycrystalline silicon blocks and the demand of native polycrystalline ingots is 1700tons. There are 12 sets of WuXi ShangJi brand diamond wire slicing machines, 8 sets reforming machines, the single blade capacity is 20,000 pieces per day, and the annual production capacity is over 10 million pieces. Name: High efficiency polycrystalline silicon block Technology :Semi-melting Type: P Type Resistance:1~3Ωcm minority carrier :>6μs Hem width:157.00~157.25mm Angle of Chamfer:1~2m Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Our factory in China and product more than 100 kinds of solar products, we has professional quality solar panels manufacturing experience for 17 years.We complete capacity of 2GW in 2022 year. As a solar energy products manufacturers, we have formed the sales territory from domestic to overseas at present. Adhering to the leading technology, the new intelligent production line is a strong guarantee for us to serve customers.Please contact us if you are interested in our product.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.