16-CH DI Switch Signal to RS485/232 Converter
WAYJUN WJ61 series 16-ch DI Isolated Digital Signal to RS485/232 Module,Slim-line plastic housing with integral 35mm DIN rail mounting , terminals,power supply(8-32VDC)
Features�?
>> Sixteen channels isolated digital signal input,isolated RS-485/232 output
>> Support 16-ch dry contact input or 16-ch wet contact input
>> Input/output:3000VDC isolation
>> Over voltage protection,reverse polarity protection
>> Can read level status of each channel via the RS-485/232 interface
>> 3000VDC isolation between input and output
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, easy programming, easy application
>> DIN35 Rail-mounted
>> Can programme setting module address,baud rate
>> Support Modbus RTU communication protocol
>> Dimensions: 120 mm x 70 mm x 43mm
Applications�?
>> level signal measurement, monitoring and control
>> RS-485 remote I / O, data acquisition
>> Intelligent building control, security engineering applications
>> RS-232/485 bus in industrial automation control system
>> Industrial signal isolation and long-term transmission
>> Equipment operation monitoring
>> Sensor signal measurement
>> Industrial data acquisition and recording
>> Medical, industrial product development
>> Switching signal acquisition
Digital signal input types:
1.Dry contact input
2.Wet contact input
3.Open collector input
Product List:
Type No.: WJ61-485 (input:16-ch digital signal,output:485 interface)
Type No.: WJ61-232 (input:16-ch digital signal,output:232 interface)
Part No : 1804
Part No : 1803
Part No : 1802
Part No : 1801
Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.
Virtual COM port mode of USB to RS485 converter ESD and Surge Protection Built-in USB-Powered(no extra power supply) TX-Enable without control signal
24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals. Communication software: Communication interface: 1 standard rs485 interface or 2 standard rs232 interface Communication agreement: standard ascii, modbus, can make network communicate With plc, rtu or watch software. Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit. Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\ 38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms. Anti jamming: Set checksum according to need. Its inside contains momentary bate diode, can Restrain surge impulse, protect modules. Model selection: Iso 4021a u(a) - Input voltage or current signal U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface 232/485: output is rs-232orrs-485interface, rs232/485 switchover freely Size:62*51*83mm
1. Compatible with rs232, rs485 tia/eia standard 2. Automatically send/receive data, without external traffic control signals 3. Communication rate: 300-38400bps 4. Communication distance: 1.2km(9600bps) 5. Can connect 32pcs rs232 or rs485 devices.
EDAM-8521 Isolated Addressable RS-485/422 to RS-232 Converter * Addressable RS-485/422 to RS-232 Converter * Support Addressable or Nonaddressable mode * RS-232 support RTS, CTS handshake signal * Transmission speeds of up to 115.2 kbps * RS-232/RS-485 can be set to different baud rates * Support ASCII format and Modbus-RTU protocol * Surge protection on RS-485/422 line * Minimum 3000 VDC isolation protection * Power and data flow indicator for trouble shooting
