This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Parameter:
Upset forging machine:
Mode:BDC-Auto 1
Suitable Rebar size (mm):16-40mm
Voltage: 380V/3 Phase/50Hz
Nom. Upset Force (kN):2000
Dimensions (mm):1300*680*1400
Weight (kg):850KG
Hydraulic Pump:
Mode XB6.3/80
Nom. oil Pressure (Mpa):80-90
Nom. Flow (L/min):10.00
Power of Main Motor (kw):7.5 (380V/3 Phase/50Hz Or Customized)
Dimensions (mm):800*550*900
Weight (kg):150KG
china coal 0001 Introduction Of XTSDC16-32 CNC Rebar Upsetter The CNC Rebar Upsetter adopts the normal temperature extrusion deformation process. In order to increase the tensile strength of the steel bar, the steel bar is squeezed and thickened at the wire cutting position without destroying the mechanical properties of the steel ba. The machine has a compact structure and the cr No. 2 steel, sliding positioning between the two clips and with a spring return function, to ensure the coaxiality of the Upsetter part and the base metal, and improve work efficiency. I use touch screen operation, pic control, extrusion time adjustment can be adjusted on the touch screen according to the diameter of the ba, no need to open the control cabinet, with a counting function, input output, after the target is reached to stop. It is the only CNC Upsetter that adopts pic control in China. Parameter Of XTSDC16-32 CNC Rebar Upsetter Production Range 16-32mmRebar Hydraulic Flow 4.0L/min Hydraulic Pressure Rating 40Mpa Motor Power 4.0kw Rated Voltage/Frequency 380V/50Hz Dimensions 1500x700x1500mm Hydraulic Cylinder Diameter 250mm Control Form Touch Screen Operation, PLC Control
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1.First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2.Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Working principle: 1, first, we use gq50 rebar cutting machine to splice up the end of rebar. 2, secondly, we use upset forging parallel thread machine (bdc-auto1 machine) to forge the end of rebar. 3.Third, we use parallel thread cutting machine (lw-i500 machine) to thread the ends of the rebar which have been forged. 4.Fourth, an upsetting coupler is used to link the two ends of rebar in parallel thread.
