Upsetting Rebar Coupler

Supplier: Rebar Couplers, Upset Forging Machine, Parallel Thread Cutting Machine, Thread Rolling Machine, Cold Extrusion Machine, Rebar Threading Machine

16 18 20 22 25 28 32 36 40

Rebar coupler is used to connect the two rebar ends in the construction work. 1. Easy Operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 14mm to 40mm. 3. Use No.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part. size16-40mm.

The material of the cold extrusion rebar coupler is no.20 steel. The features of this technology: 1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar; 2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding; 3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines; Yj650 stamping equipment 4.No flammable gases, not affected by rainy or cold weather; 5.Relieve congestion of the connecting point, facilitated concrete pouring; 6.No professional and experienced worker needed, able to connect changed steel bar of different diameters; 7.Save 80% of connector steel consumption. The technology is assessed by the ministry of construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry." Cold extrusion application principle: 1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar. -

The material of the splicing coupler is constructional quality steel of no.45 steel. Working principle: 1)slice up the end of the rebar; 2)peel the rib of the end of rebar with specialty rib peeling parallel thread rolling machine; 3)connect the two ends of rebar with rib peeling thread coupler; The characteristics of the usage: 1.Standard model: used in the occasion for connecting the steel bar in normal situation. 2.Different diameter model: used for connecting the steel bar in different diameters. 3.Flared model: used for the steel bar which was hard to match. 4.Positive and negative screw thread model: used in the occasion when the two sides both can not be turned but the lengths can be adjusted. 5.Locking nut model: used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.

Application guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method: 1.Screw the bolt into female coupler swaged with rebar, till unable to screw continually. 2.Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. 3.sWith the help of two pipe wrenches, tighten the connection by turning both rebar/couplers in opposite direction at the same time.

Introduction Model number D12-D50 Raw material 45# high quality carbon steel; 40Cr Material 45# carbon steel Thread parallel thread Thread Pitch 2.5mm, 3.0mm, 3.5mm Thread angel 60/75 Certification ISO9001 Standard JG/T163-2013 Outer diameter 22mm-59mm Length 40mm-90mm Finish plain/ smooth Customizde remark available Type left-handed, right-handed, reduce, etc Application connecting steel rebars in construction Tensile Strength 100% bar break more than 600Mpa Technics cold extrusion or upset Specification 1.Use to splice rebar dia 12--50mm; 2.Apply to HRB335, HRB400 and HRB500 reinforced the connection; 3.High strength, tensile test usually more than 600Mpa, reach 110% of yiled strength of parent rebar; 4.Standard type, left-handed and right-handed type, reducing type, wide mouth type, nut locking type ect; 5.Raw material-saving, high energy conversation, high work efficiency; 6.Satisfy the rebar splicing needs of longitudinal, traverse and slant ect.; 7.No pollution, not influenced by weather and work-site; 8.Reliable quality, the raw material origin and production batch can be traced; 9.High dimension precision, and reliable quality; 10.Easy to operate, no torque wrench required. Packing & Delivery carton case and wooden pallet or customized Delivery Detail: within 7 days after receiving payment Paymant Terms: L/C,D/A,D/P,T/T,Western Union Our Service 1.OEM Service & Design Service & Buyer Lable are offered; 2.Prodece as customers' requirement. 3.We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam, ect.  4.Our rebar couplers are suitable for steels of different countries Company Information Baoding Jindi Machinery Co., Ltd. is specialized in rebar splicing equipment, rebar processing machinery, rebar coupler and related products. With super quality and satisfactory after-sale service, our products have enjoyed good reputation in the world market. Our products have got through relevant certificatesand testing reports, such as CE, SGS, GOST, etc. And also our company achieved ISO9001certificate.So far, our products have been selling to global market like Vietnam, India, South Korea, Indonesia, Malaysia, Brunei, Philippines, Thailand, UAE, Saudi Arabia, Kuwait, Iran, Kenya, Brazil, Peru, Bolivia, Columbia, USA, Mexico, etc. In the future, we will do our utmost to make work better and perfect, to build up the famous "Jindi" brand in this field.

Supplier: Rebar Coupler And Upset Forging Machine, Parallel Thread Cutting Machine, Thread Rolling Machine And Taper Thread Cutting Machine, Cold Extrusion Machine, Steel Bar Hydraulic Grip Machine, Cutting Tool, Rollers As Well As Anchor Plates

Supplier: Rebar coupler and upset forging machine, parallel thread cutting machine, thread rolling machine and taper thread cutting machine, cold extrusion machine, steel bar hydraulic grip machine, cutting tool, rollers as well as anchor plates