Voltage
450/750V or less
Construction
1-core: The copper conductor is insulated with natural rubber and sheathed with natural rubber or chloroprene rubber
multi-core: The copper conductor is insulated with natural rubber. Two to six insulated conductors are cabled together with extruded rubber filler, and sheathed with natural rubber or chloroprene rubber.
Standard
IEC 60245, GB/T 5013, or other standards required by customers.
Features
1.Flexible and reliable.
2.Abrasion, corrosion, high-Heat and oil Resistant.
Applications
Sino cables type rubber cables are suitable for power supply to power appliances, home appliances and movable field electric equipment at 450/750V or less.
Package
Coil, Steel /Wooden Reel ,Wooden Reel or Steel Reel.
http://www.powercablechina.com/product/show-154.aspx?m
http://www.powercablechina.com/product/show-155.aspx
http://www.powercablechina.com/product/show-154.aspx
SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents. It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line. SFEX Solution : SFEX CT Manteau / SFEX AP Tape 1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray Installation and How It Works 1. Cover the SFEX CT Manteau. 2. Prevent the spread of fire with extinguishing/flame retardance properties 2. Vertical Section Fire Installation and How It Works 1. Wind the SFEX AP Tape on the cable. 2. Prevent the spread of fire with extinguishing/flame spread prevention properties Test Result : AP Tape Test Item Test Standard Unit Test Result Flame test of vertically placed cables The carbonization length should not exceed 2.5mm from the bottom edge of the burner - Do not exceed (carbonization length: 0.6m) During installation, photograph after installation *Test Information Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant) Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape) Number of test pieces : 5 Number of tiers : 1 Number of burners : 1 Position of test piece : Spatial type Flame application time (minutes) : 20 AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape
OMG' European standard AC charging cables are manufactured with reference to EN 50620:2017 and IEC 62893-3:2017 dual standards, and DC charging cables are manufactured with reference to IEC 62893-4-1:2020 standards, and are certified by DEKRA and TUV. AC charging cables also include spring cable series, providing more choices for charging application scenarios. The environmental factors in charging cable applications are complex and varied, and it is difficult to avoid frequent stretching, bending or crushing of cables by vehicles during use. This requires charging cables to have special properties such as oil and water resistance, acid and alkali resistance, high and low temperature resistance, UV resistance, etc. and mechanical properties such as resistance to extrusion, bending and dragging, etc. OMG' has strict technical requirements for its products, and the electrical properties, structural dimensions, insulating properties, sheaths, and finished products of the European standard charging cables have gone through a series of well-established tests, to ensure the safety and reliability of the products. As an outstanding international company, OMG' provides each customer with electric vehicle charging cable solutions that meet their actual needs, thanks to its experienced technical team and its high demand for product quality.
OMG' European standard AC charging cables are manufactured with reference to EN 50620:2017 and IEC 62893-3:2017 dual standards, and DC charging cables are manufactured with reference to IEC 62893-4-1:2020 standards, and are certified by DEKRA and TUV. AC charging cables also include spring cable series, providing more choices for charging application scenarios. The environmental factors in charging cable applications are complex and varied, and it is difficult to avoid frequent stretching, bending or crushing of cables by vehicles during use. This requires charging cables to have special properties such as oil and water resistance, acid and alkali resistance, high and low temperature resistance, UV resistance, etc. and mechanical properties such as resistance to extrusion, bending and dragging, etc. OMG' has strict technical requirements for its products, and the electrical properties, structural dimensions, insulating properties, sheaths, and finished products of the European standard charging cables have gone through a series of well-established tests, to ensure the safety and reliability of the products. As an outstanding international company, OMG' provides each customer with electric vehicle charging cable solutions that meet their actual needs, thanks to its experienced technical team and its high demand for product quality.
Application: Applied for instrument, power light, electronic equipment and automatic device and including the rated voltages of 450/750v. Direction: 1, rated temperature 70 degree. 2, standard: 227iec 01 3, applications temperature: minus 25 degree to 70 degree. 4, center conductor: solid or stranded bc conductor. 5, rated voltages: 300/500v 6, insulatation: pvc
Conductor: Plain annealed Fire barrier: Mica Tape Insulation: XLPE Filler: Polypropylene yarn Binder Tape: Polypropylene sheath : LSOH compound No. of Core Conductor Nominal Thickness of Insulation Nominal Thickness of Sheath Approx. Overall Diameter Approx. Weight Size No/Dia. of Wire Approx. Dia. mm2 No/mm mm mm mm mm kg/km 2 1.5 7/0.53CR 1.59 0.7 0.9 9.0 115 2.5 7/.067CR 2.01 0.8 1.0 10.5 160 4.0 7/0.85CR 2.55 0.8 1.1 12.0 220 3 1.5 7/0.53CR 1.59 0.7 1.0 10.0 140 2.5 7/0.67CR 2.01 0.8 1.1 11.5 195 4.0 7/0.85CR 2.55 0.8 1.1 12.5 265 4 1.5 7/0.53CR 1.59 0.7 1.0 11.0 170 2.5 7/0.67CR 2.01 0.8 1.1 12.5 240 4.0 7/0.85CR 2.55 0.8 1.2 14.0 335 . Note: CR = Circular stranded conductor .
