FEATURES:
-Mixing ratio of catalyst 2%-5%
-Good flowability
-Great self-deaeration
-Very good heat resistance
-High thermal conductivity
-Outstanding release properties
-High tear resistance
-Low shrinkage
-Outstanding resistance to inhibition
-Good resistance to polyester resin and concrete
SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, such silicone base and its curing agents have a usable life of 12 months.
PACKAGE:
Silicone Base is available in 1Kg, 5Kg, 20Kg, 25Kg and 200Kg containers. Curing Agents are available in 50g, 1Kg and 20Kg containers.
APPLICATIONS:
-Architectural Restoration
-Sculpting/Wax Casting
-Concrete/GRC Casting
-Gypsum/Plaster Decoration
-Polyester/Resin Crafts Molding
-Furniture Molding
-Candles Mold making
-Soaps Mold making
-Tire Molding
-Detailed reproduction of figurines, art objects and similar items
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
INTRODUCTION: The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. FEATURES: 1.Two-component silicone rubber with tin-catalyst 2.Cured under room temperature 3.Low shrinkage 4.Excellent fexibility & easy demould LIQUID RTV-2 SHOE MOLD SILICONE RUBBER NOTES: Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried. APPLICATION: Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us. For more information, welcome to contact Lilian: Wechat / Phone: 8613617490457 E-mail: lilian(at)xrsil(dot)com Skype: lilian-xrsilicone Company: Dongguan Xinrun Silicone New Materials Co., Ltd Xinrun Group Limited Factory address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making Features of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making: 1. Two part of liquid fluid: liquid white silicone and curing agent. 2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 2 - 4 hours. 3. Good fluidity and excellent operation. 4. Good resistance to weather, temperature, aging, acid. 5. Excellent tear strength, comfortable duplication times. Application of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making: 1.Resin crafts, unsaturated resin crafts 2. Poly resin crafts, candle crafts, plastic crafts 3. Making molds forgypsum,GRC,concrete,Artificial stone products molding,Wax casting 4.Decoration building mold making 5.Lighting & candles crafts,stationery gifts,crafts industry 6.Casting for Statue,Buddha, Christmas ornaments,sculptures, figures etc Operation Instruction for Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making : RTV-2 liquid mold silicone rubber is a kind of flowing liquid, and it consists of two component, part a is a flow-able liquid silicone rubber, part B is the curing agent. 1. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix themevenly. 2. Then after vacuum-pumping the mixture, you can pour it into the mold frame. 3. The silicone mold will cured in 2~3 hours. Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during vacuum. it will not be operated.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
Supplier: Remelted zinc ingots, pwg zinc ingots, zinc dross, zinc ash, zinc oxide, lead dross, magnesium ingots, all grades, silicon metal, lead ore/ concentrate, zinc concentrate/sulphide
Buyer: Zinc dross, zinc ash or skimming from hot dip galvanizing process, zinc fines, zinc die cast scraps, lead dross, brass and copper scraps
Applications of RTV-2 manual molding silicone rubber It is mainly applied in manual mold design, PVC plastic mould, cement product mould, low melting-point alloy mould, alloy toy craft, plastic toy, craftwork, gift and stationery, big statue, cultural relic duplication and reproductions; pad printing orientation, electronic appliances vibration resistance, etc. Features of RTV-2 manual molding silicone rubber Low shrinkage,no deformation of the mould, good elasticity, the more moulds duplicated the better, etc.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
