Standard Magnetic Stirrer

Separator

Used for removing tramp iron (0.1 ~ 25kg) from free-flowing, non-magnetic materials such as coal, cement, corn, sugar, flour, gravel, plastic, rubber and other granular materials.

About inquiry

For -100mesh silica sand, downstream feeding method is adopted(7 is feeding inlet,5 for outlet).
Slurry magnetic separator adopts intermittent working method. When slurry is fed,4# valve close, then slurry comes through 7# valve to enter into working chamber, coils in working chamber will generate strong magnetic force to attracted the paramagnetic particles to magnetic medium(2),non-magnetic matter will go through 5# valve and then lead to concentration pond. After running for a period,5# valve will close,7# inlet valve close and 4# valve opens, and turn off the power of coils(no magnetic field this time),then open run motor of vibrator,flushing pump, under the action of 8# vibrator and 1# flushing water, paramagnetic particles will be discharged from 4# valve, after this has been done,7# valves is open,4# valve closes,5# is open, and a circulating circle is done.
 
Coil
Coils of made of copper with pureness above99.95%, no usage of aluminum or other alloy substance has been used. Copper coils is purchased and checked as per National Standard GB/T1527-2006, GB/T 20301-2006.conductivity of coil is 10% higher than general ones. Coils are dipped into transformer oil, to decrease the temperature of coils quickly and steadily, circulating device is equipped with external heat exchanger.it guarantees that the outlet cooling water of coils is less than 62 Celsius degrees, thus magnetic field fluctuation is under reasonable control range.
     Magnetic medium: magnetic medium is made of special iron substance, after special treatment, permeability has been enforced, after power off of coils, there is no remanence. Density of magnetic medium is winded according to the product mesh of user, when slurry goes through magnetic medium (Fig 1, right), paramagnetic particles have been attracted to it, and then the beneficiation has been improved.

Automatic tube filling and sealing machine

Features

Tube types: plastic soft tubes or flexible compound tubes.
Ce certified.
Color touch screen control technology.
Plc control system.
Automatic tube loading, tube washing, positioning, filling, sealing & hot air heating and tube ejecting.
Tube loading and tube washing are done pneumatically.
Ruggedly design, durable, easy to operate and simple maintenance.
Tube positioning is control by photoelectric sensor.
Equipped with temperature control and separate cooling system.
No tube, no fill.
Safety production and overload protection features are included.
Stainless steel construction and all parts contacted with material are high quality 316l stainless steel to meet cgmp standard.
Double jacket temperature control hopper and stirrer are available as options.

Specifications

Power supply: 380v 3phase or 220v 1phase.
Filling range: 5-250 ml or 50-500 ml.
Hopper volume: 40 l.
Speed (tubes/minute): 40
Filling precision: 99%.
Tube height: 220 mm (max.).
Tube diameter: 10-50 mm or 20-60 mm.
Air pressure: 0.35-0.5 mpa.
Dimension (l x w x h): 1900f-1000f-1900 mm.
Weight: 900kg.





1900mm*1000mm*1900mm

About Lead Refining

Lead recycled from used lead acid batteries or other sources (Secondary Smelting) via the Mini Blast Furnace or Rotary Furnace route, contains lot of contamination and undesired components. On the other hand, Lead required for battery manufacturing is either soft Lead with 99.97% purity or hard Lead of varying Antimony compositions.

In order to make quality of lead suitable for its different uses, different variations of pot melting processes are employed. These include – “Re-Melting” for removal of slag, “Refining” for attaining required purity levels and “Alloying” for producing various alloys of lead.

The equipments used are the same, the consumables and the processes, however, differ.

Description of Melting Pot

The Melting Pot (or Refining Pot or Alloying Pot, as it is variously called), is a mechanical mixing device with a pot and a heating arrangement. The inner pot is made of heavy MS plate with dish end bottom. It is placed within a jacket of refractory bricks, which in turn, are protected by an outer cover of MS plate with reinforcements. The pot is covered at the top with opening for feeding lead ingots and is provided with an electro-mechanical mixer. At the bottom, a heating source, usually an oil fired burner, is provided to heat the pot and to melt the lead.

Once lead melts, impurities are skimmed and removed and any consumables required are added. Lead is then drained from the pot through an outlet pipe and valve.

Capacity of such pots depends upon the requirements of particular units. Standard pot capacities made are from 4.0 TpB to 20.0 TpB. Higher capacity pots are also manufactured as required by any particular establishment.

A typical 10.0 TpB Refining Pot has the following standard sizes and specifications:
•Diameter (ID) : 1150mm
•Height : 1250mm (+Dish Depth of 200mm)
•Flange Width : 350mm
•Outer Shell Diameter : 1900mm
•Stirrer MoC & Dia : SS-304 & 75mm
•Stirrer Motor : 5.0 HP x 960 RPM
•Outlet Valve Size : 40mm
•Burner : Diesel Fired
•Fuel Consumption Range : 8-18kg/ltr
Melting pots are installed both with and without accessories which may include Ingot Casting Machine, Ball Making Machine (where Ball Mills are installed down the line), Air Pollution Control Systems, Jib Cranes etc.

Technical parameters

ModelMTC-100
Speed Range300 ~1500rpm
Shaking Orbit3mm (horizontal)
Temp. Control Range0 ~100
Max Cooling rangeR.T. Low down 20
Temp. Setting range0 ~100
Temp. Stability ±0.3
Block Temp. Uniformity ±0.3
Display Accuracy0.1
Heating Speed 15min (20~100)
Cooling time 30min (R.T. Down to 20) @Nature Temp.30
Cooling Speed 7/min (100 Down to 20) 1.2/min (R.T. Down to 10)
Time Range1min ~99h59min Or point move
VoltageAC 100V ~230V, 50/60Hz
Power200W
Fuse Protector250V, 3A, 20
DimensionW.196 x D.270x H.170mm
Net Weight8.8kgs


3-in-1 model
Plate
(shaking and mixing)tube holers
(shaking and mixing)Blocks (shaking ,mixing ,incubator)
PCR plates
(skirted, semi-skirted, unskirted)0.2 ml PCR tubes and PCR stripsRefer to Exchangeable blocks for MTH-100/MTC-100 series
384 well PCR plate0.5 ml Micro-test tubes
96- and 384- deepwell plates1.5 ml/2.0ml Micro-test tubes
MTPs enzyme labeled plate 
 
Conventional configuration
MTC-100A / MTC-100B / MTC-100C / MTC-100D / MTC-100E
MTH-100A / MTH-100B / MTH-100C / MTH-100D / MTH-100E
E.g.: MTC-100C means select the type MTC-100 with Block type C.
 
Exchangeable blocks for MTH-100/MTC-100 series

Picture:

Service
1.Production Capacity: 2000 Unit/Month
2.Delivery Time:Usually 5 working days after payment received.
3.Delivery Method: DHL, UPS, TNT, FEDEX or others.
4.Packaging: Standard Carton Packing.
5.Payment Term: 100% TT in Advance.
6.Certificate: CE; ISO9001:2008;IQNet
7.Warranty:1 Year
8.OEM provided.
9.Plug: European type, British type, US type, Korean Type, etc.