We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Product Physical Properties
WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE.
Specifications:
Appearance: white free-flowing crystalline powder without agglomeration
Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum)
Chloride (as Cl), % by weight 0.20(maximum)
Sulphates (as SO4),% by weight 0.10(maximum)
Iron (as Fe), % by weight 0.004(maximum)
Nonvolatile matter, % by weight 0.10(maximum)
Heavy metals (as Pb), ppm 2.50(maximum)
Copper (as Cu), ppm 5.0(maximum)
Arsenic (as As), ppm 0.6(maximum)
Tarry matter To pass test
Oil Content Less than 10 ppm
Melamine Content NIL
USAGE
BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC.
PACKING
OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST.
Alcohol ethanol material can be corn(maize), wheat,potato,cassava,molasses,beetroot or any other material which contains starch or sugar. we offer :
1. Turn key alcohol plant projects which can produce 95% -96%food grade alcohol ,medical alcohol,reagent grade anhydrous alcohol or 99.8% fuel grade anhydrous ethanol.Output can be from 1000LPD to 2millionLPD.
2. Alcohol by-product liquid CO2 cycle equipment, fusel oil separation and purification technology and equipment.
3. DDG protein feed equipment, DDGS protein feed drying equipment.
4. Micro alcohol distillers or brewery that can be used at home or restaurant or hotels
5. vinegar equipment.
6. Waste water environmental processing equipment.
7.OEM service. Design and manufacture alcohol ethanol equipment according to customers requirements or drawings.
pls contact us.
